

Nv h5t
S-COM module based on NV7B
- Size
- 8 × 56 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 22
- Nets
- 17
- Pads
- 45
- Tracks, vias
- 101, 13
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Aug 2020
- Updated
- 16 Oct 2026
Overview
Nv h5t is an open-source printed circuit board by kmzbrnoI, from the kmzbrnoI/nv-h5b repository on GitHub. It is a 2-layer board of 8 × 56 mm with 22 parts on 17 nets, routed with 101 tracks and 13 vias.
It is built around the ATTINY25-20SSU and BAT54. Its parts include 7 resistors, 6 diodes, 2 capacitors, 2 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdNV-H5B
NV-H5B is a S-COM receiver based on NV-7B. It is mounted to the socket of a signal and displays signal code according to the received code on data wire.
This repository contains KiCad schematics & pcb layout design as well as MCU firmware source code.
Basic features
- 5 V power supply.
- Mechanical compatibility with NV-7D.
- Receives standard S-COM protocol.
- Separate resistor for each LED to unify brightness.
- ATtiny25 main MCU.
- Opensource & openhardware design.
- Supported signals (CZ).
Recommended resistor values
AŽD 70 signals by Josef Němeček
- Yellow: 4k7
- Red: 10k
- White: 22k
- Green: 2k2
- Blue: 22k
AŽD 65 signals by Mr. Dvořáček (Pečky)
- Yellow: 1k
- Red: 10k
- White: 22k
- Green: 1k
- Blue: 47k
Authors
License
PCBs are provided under Creative Commons Attribution-ShareAlike 4.0 License as openhardware project. You may download any data, contribute to the project, create PCB yourself or even sell it yourself.
Source code is provided under the Apache License v2.0 .
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 4k7 | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R6 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | YELLOW | LED_SMD:LED_0805_2012Metric | D2, D6 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | AP2204RA-3.3 | Package_TO_SOT_SMD:SOT-89-3 | U2 |
| 1 | ATtiny25-20SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | BAT54 | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | PSH02-03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | WHITE | LED_SMD:LED_0805_2012Metric | D3 |
The 18 most common of 22 parts.
More from kmzbrnoI/nv-h5b
1- 2 layers8 × 20 mm

Similar boards
- 4 layers40 × 40 mm

STMF765 Flight Controller
MatthiasGeorgImhof/STMF765_Flight_Controller
A flight controller inspired by Speedybee F405 v3 but with CAN using F7 MCU. Use flash memory instead of flash card.
235 parts1 - 2 layers68.8 × 48.6 mm

- 2 layers100 × 80 mm

- 2 layers100 × 80 mm

- 2 layers21.6 × 56.5 mm

- 2 layers100 × 150 mm

I2c moist sensor pannel
Miceuz/i2c-moisture-sensor
I2C based soil moisture sensor
140 parts258Apache-2.0 - 4 layers150 × 90 mm

Misrc v2.5-rounded
Stefan-Olt/MISRC
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.
328 parts236CC-BY-4.0 - 4 layers93.2 × 62.4 mm

Compute module
magkopian/raspberry-pi-compute-module-base-board
Base board for the Raspberry Pi Compute Module
66 parts214GPL-3.0
Questions
How big is the Nv h5t PCB?
It measures 8 × 56 mm and has 2 copper layers, 1 mm thick.
What parts does the Nv h5t use?
22 parts, built around the ATTINY25-20SSU and BAT54. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nv h5t KiCad files?
From the kmzbrnoI/nv-h5b repository on GitHub, at the commit this page was made from: the board is pcb_tester/nv-h5t.kicad_pcb and its schematic pcb/nv-h5b.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nv h5t design in my own project?
Its repository states no licence, so its author keeps all rights: ask kmzbrnoI before reusing the design.