Skip to the content
12345678

AD8039ARZ

Analog DevicesExtended

-40℃~+85℃ 1mA 2 30nA 350MHz 3V~12V 3mV 4.5uV/℃ 425V/us 67dB 750nA 8nV/√Hz@100kHz SOIC-8 Operational Amplifier ROHS

Part id
adi/AD8039ARZ
Category
Operational Amplifier
Package
SOIC-8
Pins
8
In stock
0 at JLCPCB (C652226)
Used on
5 open-source boards

Overview

The AD8039ARZ is an operational Amplifier made by Analog Devices in a SOIC-8 package with 8 pins. -40℃~+85℃ 1mA 2 30nA 350MHz 3V~12V 3mV 4.5uV/℃ 425V/us 67dB 750nA 8nV/√Hz@100kHz SOIC-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:AD8034ARZ-REEL7, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C652226). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1VOUT13IN1+2IN1 -4-VS8+VS
EasyEDA_Cloud:AD8034ARZ-REEL7From EasyEDA

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the AD8039ARZ
PinNameType
1VOUT1Output
2IN1 -Unspecified
3IN1+Unspecified
4-VSUnspecified
5IN2+Unspecified
6IN2-Unspecified
7VOUT2Output
8+VSUnspecified

Open-source boards using it

5
  • 4 layers128 × 184 mmCosmicpi 1.7, the printed circuit board in 3D

    Cosmicpi 1.7

    CosmicPi/CosmicPiV1.7PCB

    PCB for Version 1.7 of the Cosmic Pi Hardware. Incremental changes from V1.6. This design is licensed under the CERN OHL V1.2

    219 parts14
  • 4 layers132 × 100 mmCosmicpi2beta, the printed circuit board in 3D

    Cosmicpi2beta

    CosmicPi/CosmicPi2-pcb

    Prototypes for our V2 PCB

    223 parts3
  • 4 layers128 × 184 mmCosmicpi 1.6, the printed circuit board in 3D

    Cosmicpi 1.6

    cosmic-pi-deprecated/CosmicPiV1.6PCB

    Version 1.6 of the Cosmic Pi Hardware, learning the lessons from V2 and going back to something simpler. All the components are now on a single PCB with a snap-off for the SiPM elements.

    230 parts1
  • 2 layers55.6 × 54.8 mmSignal Generator, the printed circuit board in 3D

    Signal Generator

    Jmanicom/ELAB-Signal-Generator

    A square wave generator with adjustable frequency, gain, and offset control. Designed as a part of UBC's ELAB PCB design course.

    72 partsCERN-OHL-S-2.0
  • 2 layers80.5 × 62 mmPCB course, the printed circuit board in 3D

    PCB course

    seankyer/QuickSig

    A signal generator circuit completed as part of a PCB course at UBC

    73 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AD8039ARZ?

Yes. The symbol is EasyEDA_Cloud:AD8034ARZ-REEL7 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AD8039ARZ?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the AD8039ARZ datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the AD8039ARZ?

JLCPCB lists it as part C652226, with 0 in stock; the sellers' links on this page open their listings.

What can replace the AD8039ARZ?

Parts like it in the library: the LM358D by onsemi, the LM2904D by onsemi, the NE5532D by Texas Instruments and the LM358D by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AD8039ARZ?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.