4 layers128 × 184 mm
Cosmicpi 1.7
CosmicPi/CosmicPiV1.7PCB
PCB for Version 1.7 of the Cosmic Pi Hardware. Incremental changes from V1.6. This design is licensed under the CERN OHL V1.2
219 parts14
4 layers128 × 184 mm
Cosmicpi 1.6
cosmic-pi-deprecated/CosmicPiV1.6PCB1Version 1.6 of the Cosmic Pi Hardware, learning the lessons from V2 and going back to something simpler. All the components are now on a single PCB with a snap-off for the SiPM elements. We have also moved to KiCad! Now at board rev C.
- Size
- 128 × 184 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 230
- Nets
- 180
- Pads
- 737
- Tracks, vias
- 2,130, 474
- Pours
- 23
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 31 Mar 2019
- Updated
- 14 Aug 2019
Overview
Cosmicpi 1.6 is an open-source printed circuit board by cosmic-pi-deprecated, from the cosmic-pi-deprecated/CosmicPiV1.6PCB repository on GitHub. It is a 4-layer board of 128 × 184 mm with 230 parts on 180 nets, routed with 2,130 tracks and 474 vias.
It is built around the L76-M33, AD8039ARZ and MAX1932ETC+, with the LPS25HB, MCP47CMB22-E/MF and SI7006-A20-IM among its other parts. Its parts include 76 capacitors, 70 resistors, 19 ICs, 15 connectors and 8 diodes. It belongs with the STM32 boards of this library.
Main components
12L76-M33
SMD-18P-165dBm -40℃~+85℃ 2.8V~4.3V SMD-18P GNSS Modules ROHSQuectelGNSS Modules
AD8039ARZ
SOIC-8-40℃~+85℃ 1mA 2 30nA 350MHz 3V~12V 3mV 4.5uV/℃ 425V/us 67dB 750nA 8nV/√Hz@100kHz SOIC-8 Operational Amplifier ROHSAnalog DevicesOperational Amplifier
MAX1932ETC+
TQFN-12(4x4)Dynamic voltage regulation、Overcurrent Protection、Operation status indication TQFN-12(4x4) DC-DC Converters ROHSMaxim Integrated (Analog Devices)Power Management - Specialized
LPS25HB
HLGA-10(2.5x2.5)-30℃~+105℃ 0.1hpa 0.2hpa 1.7V~3.6V 26Kpa~1.26bar I2C、SPI No HLGA-10(2.5x2.5) Pressure Sensors ROHSSTMicroelectronicsPressure SensorsMCP47CMB22-E/MF
DFN-10-EP(3x3)-40℃~+125℃ 12 16us 1LSB 2 2.7V~5.5V I2C DFN-10-EP(3x3) Digital to Analog Converters (DAC) ROHSMicrochip TechnologyDigital To Analog Converters (DAC)
SI7006-A20-IM
DFN-6(3x3)-40℃~+125℃ 0%RH~100%RH 1.9V~3.6V 150uA 5%RH Factory calibration、Built-in heater I2C ±1℃ DFN-6(3x3) Temperature and Humidity Sensor ROHSSilicon LabsTemperature And Humidity Sensor
TPS62163DSG
SON83V-17V 1A Step-Down Converter, High Accuracy, with DCS-Control Output Voltage 5VTexas InstrumentsUncategorised
LP2985-33DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 45dB@(1kHz) 575mV@(150mA) 850uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
74HC00D
SOP-14-40℃~+125℃ 1.5V、3.15V、4.2V 1.9V、3.7V、5.9V 100mV、400mV、400mV 2 2V~6V 4 40uA 5.2mA 5.2mA 500mV~1.8V 74HC Series 7ns@6V,50pF NAND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates
LSM9DS1
LGA-24(3x3.5)-40℃~+85℃ 1.9V~3.6V 16bit Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-24(3x3.5) Accelerometers ROHSSTMicroelectronicsAccelerometersMAX991ESA+
SOIC-8-2.75V~-1.25V、1.25V~2.75V -40℃~+85℃ 0.5pA 120ns 1nA 2 2.5V~5.5V 2.5mV 48uA 500uV 80dB Built-in hysteresis Push-pull Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Comparators ROHSMaxim Integrated (Analog Devices)Comparators
BAS70-04
SOT-23Schottky Diodeshongjiacheng
README
README.mdCosmicPiV1.6
Version 1.6 of the Cosmic Pi, learning the lessons from V2 and going back to something simpler. All the components are now on a single PCB with a snap-off for the SiPM elements. We have also moved to KiCad!
The SiPM's in this design are from Ketek, and we're very happy with the performance. You can find the SiPM datasheet here: https://www.ketek.net/wp-content/uploads/2018/12/KETEK-PM3325-WB-D0-Datasheet.pdf The SiPM's are also available to purchase retail from their shop (!) - a significant advance over our previous models: https://www.ketek.net/store/products/pm3325-wb/
The design uses scintillators from Amcrys http://www.amcrys.com/ which are not yet available via a retail outlet, however any BC-408 equivalent scintillator that has diamond polished finish surfaces and dimensions of 200x100x10mm can be mated to the SiPMs with suitable mounting holes.
What do the signals do?
Shapeout 1 & 2 - Shaped (i.e. amplified and stretched signal from the SiPMs - muon detection waveforms). Not used in current software.
Biasfb 1 & 2 - Feedback on the Vbias supply (i.e. to check that it's the right voltage). Not used in current software.
Inj led 1 & 2 - Light injector LEDs, allowing the operation of the SiPM to be checked (and calibrated) post-assembly.
Accint 1, 2 - Interrupts from the accelerometer, not really used for anything yet.
Magint 3 - Interrupt from magnetometer, also not used.
Flag, boot0 - Signals to the Raspberry Pi, flag can be set by the STM32 to indicate a particular condition. Boot0 is used to set the boot mode of the STM32, for example when flashing. This doesn't function correctly in this version, it will be updated for V1.7, due to some issues with the STM32 bootloader.
Vbusm otg dm otg dp - Vbus is the USB bus voltage detection line to the STM32 (i.e. in OTG mode, sense incoming voltage), DM and DP are the differential lines for USB communication. Not functional in the current software; note that the USB doesn't power the device.
Swclk, swdio - These are the programming commands for the STM32, based on the ST-Link system. These work fine, used for programming.
Parts
230| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C5, C11, C12, C14, C15, C17, C18, C23, C27, C29, C34, C35, C43, C44, C49 +14 |
| 21 | 10k | Resistor_SMD:R_0603_1608Metric | R14, R15, R21, R22, R23, R24, R25, R26, R27, R28, R29, R34, R35, R36, R37, R49 +5 |
| 15 | 1u | Capacitor_SMD:C_1206_3216Metric | C20, C21, C25, C26, C28, C36, C37, C38, C39, C40, C42, C58, C62, C63, C75 |
| 7 | 100k | Resistor_SMD:R_0603_1608Metric | R2, R30, R31, R38, R39, R40, R41 |
| 6 | 100 | Resistor_SMD:R_0603_1608Metric | R54, R55, R64, R66, R67, R69 |
| 6 | 10n | Capacitor_SMD:C_0603_1608Metric | C16, C22, C30, C31, C41, C59 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric | R42, R43, R44, R45, R50, R51 |
| 5 | 20 | Resistor_SMD:R_0603_1608Metric | R1, R3, R4, R10, R70 |
| 5 | 220n | Capacitor_SMD:C_0603_1608Metric | C19, C32, C33, C60, C61 |
| 4 | 200k | Resistor_SMD:R_0603_1608Metric | R20, R56, R58, R60 |
| 4 | 300 | Resistor_SMD:R_0603_1608Metric | R6, R7, R62, R63 |
| 4 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9, J10, J13, J15 |
| 4 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J8, J11, J12, J14 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D7, D8 |
| 4 | MountingHole_3.7mm | MountingHole:MountingHole_3.7mm | H1, H2, H3, H3 |
| 4 | n.a. | Capacitor_SMD:C_1206_3216Metric | C9, C10, C51, C52 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C13, C24, C56 |
| 3 | AD8039 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U14, U15, U19 |
| 3 | LM555 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6, U11, U12 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C47, C48 |
| 2 | 150uH | Inductor_SMD:L_1812_4532Metric | L2, L4 |
| 2 | 15k | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | 1n | Capacitor_SMD:C_0603_1608Metric | C71, C73 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 24.9k | Resistor_SMD:R_0603_1608Metric | R18, R19 |
| 2 | 30k | Resistor_SMD:R_0603_1608Metric | R52, R53 |
| 2 | 30p | Capacitor_SMD:C_0603_1608Metric | C45, C46 |
| 2 | 330R | Resistor_SMD:R_0603_1608Metric | R32, R33 |
| 2 | 47n | Capacitor_SMD:C_0603_1608Metric | C68, C69 |
| 2 | 500k | Resistor_SMD:R_0603_1608Metric | R65, R68 |
| 2 | 5100 | Resistor_SMD:R_0603_1608Metric | R46, R47 |
| 2 | 806 | Resistor_SMD:R_0603_1608Metric | R16, R17 |
| 2 | BAS70-04 | Package_TO_SOT_SMD:SOT-23 | D5, D6 |
| 2 | BAT46 | Diode_SMD:D_SOD-123F | D3, D4 |
| 2 | BSS123 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x04_Male | Cosmic:Ketek_PM3325-WB | J4, J5 |
| 2 | EMI_Filter_LL_f | 744232090:IND_744232090 | FL1, FL2 |
| 2 | LP2985-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U13, U16 |
| 2 | MAX1932 | maximsmd:QFN-12-1EP_4x4mm_P0.8mm | U17, U18 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 100u | Capacitor_SMD:C_1206_3216Metric | C76 |
| 1 | 2.2uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R48 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric | C57 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 47nH | Inductor_SMD:L_0603_1608Metric | L3 |
| 1 | 74HC00 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | 8 MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | L76-M33 | Cosmic:LM76-M33 | U3 |
| 1 | LPS25HB | Package_LGA:ST_HLGA-10_2.5x2.5mm_P0.6mm_LayoutBorder3x2y | U5 |
| 1 | LSM9DS1 | Package_LGA:LGA-24L_3x3.5mm_P0.43mm | U7 |
| 1 | MAX991 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | MCP47CMB22 | Package_SO:MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | Raspberry_Pi_2_3 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical_SMD | J7 |
| 1 | SI7006-A20 | Package_DFN_QFN:DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | U8 |
| 1 | SMA | Connector_Coaxial:SMA_Molex_73251-1153_EdgeMount_Horizontal | J2 |
| 1 | STM32F401RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SWD | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical_SMD_Pin1Left | J6 |
| 1 | TPS62163DSG | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U10 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J3 |
The 201 most common of 230 parts.
Similar boards
- 4 layers132 × 100 mm
- 4 layers28 × 20.5 mm
- 2 layers108 × 67.2 mm
- 2 layers55.6 × 54.8 mm
Signal Generator
Jmanicom/ELAB-Signal-Generator
A square wave generator with adjustable frequency, gain, and offset control. Designed as a part of UBC's ELAB PCB design course.
72 partsCERN-OHL-S-2.0 - 2 layers80.5 × 62 mm
PCB course
seankyer/QuickSig
A signal generator circuit completed as part of a PCB course at UBC
73 parts - 2 layers33.3 × 54.5 mm
- 6 layers65 × 56.5 mm
RPi Hat
tharinduudu/gLOWCOST-2v2-mppcInterface-
Four-channel Raspberry Pi HAT for gLOWCOST scintillator/MPPC readout with programmable bias, thresholds, and FPGA hit processing.
204 parts1
Questions
How big is the Cosmicpi 1.6 PCB?
It measures 128 × 184 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Cosmicpi 1.6 use?
230 parts, built around the L76-M33, AD8039ARZ, MAX1932ETC+ and LPS25HB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cosmicpi 1.6 KiCad files?
From the cosmic-pi-deprecated/CosmicPiV1.6PCB repository on GitHub, at the commit this page was made from: the board is cosmicpi_1.6.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cosmicpi 1.6 design in my own project?
Its repository states no licence, so its author keeps all rights: ask cosmic-pi-deprecated before reusing the design.