Skip to the content

Open-source KiCad boards

142 match “TL-Embedded”

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers40 × 60 mmJoint controller board rev d power, the printed circuit board in 3D

    Joint controller board rev d power

    aliahumanoid/alia-humanoid-core

    Humanoid research project (Phase 0): firmware, host software, STL files and electronics for tendon-driven joints inside real human proportions. GPLv3 software, CC BY-NC-ND hardware files.

    40 parts12GPL-3.0
  • 4 layers111.8 × 165.1 mmModulation board, the printed circuit board in 3D

    Modulation board

    JordanAceto/micro_ox

    Monosynth with analog signal path and digital controls. SSI2130 VCOs and SSI2140 VCF.

    244 parts8CC-BY-4.0
  • 2 layers60.3 × 165.1 mmVCF VCA board, the printed circuit board in 3D

    VCF VCA board

    JordanAceto/micro_ox

    Monosynth with analog signal path and digital controls. SSI2130 VCOs and SSI2140 VCF.

    138 parts8CC-BY-4.0
  • 4 layers68 × 38 mmSensor Board, the printed circuit board in 3D

    Sensor Board

    CMGeldenhuys/kleinvoet

    Spatially-Distributed Temporally-Synchronised Infrasonic Recorder

    67 parts3CERN-OHL-S-2.0
  • 2 layers22 × 20 mm3117 breakout, the printed circuit board in 3D

    3117 breakout

    r4hulrr/ausign

    Real-time Auslan (Australian Sign Language) to English speech translation glove. Built with ESP32-S3, flex sensors, IMU on a custom PCB, and a Bluetooth-connected Python GUI.

    19 parts3MIT
  • 4 layers152 × 122.5 mmController board, the printed circuit board in 3D

    Controller board

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    93 parts2CERN-OHL-S-2.0
  • 4 layers159.6 × 161 mmShack interface, the printed circuit board in 3D

    Shack interface

    PE1RGU/hf-antenna-switch

    Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.

    290 parts2CERN-OHL-S-2.0
  • 2 layers98 × 60 mmClearBell Inneneinheit, the printed circuit board in 3D

    ClearBell Inneneinheit

    akoerner-dev/ClearBell

    Selbst entwickeltes ESP32-Klingelsystem fuer ein Zweifamilienhaus - KiCad-Hardware und Arduino-Firmware (WLAN/UDP, HMAC-gesichert).

    30 parts1MIT
  • 4 layers98 × 60 mmClearBell V0.2 Innen, the printed circuit board in 3D

    ClearBell V0.2 Innen

    akoerner-dev/ClearBell

    Selbst entwickeltes ESP32-Klingelsystem fuer ein Zweifamilienhaus - KiCad-Hardware und Arduino-Firmware (WLAN/UDP, HMAC-gesichert).

    59 parts1MIT
  • 4 layers135.5 × 25 mmObstacle detector, the printed circuit board in 3D

    Obstacle detector

    farhanarrafi/embedded-project-website

    UNT Embedded Hardware/Software Design Course Report

    12 parts
  • 4 layers60.5 × 100.5 mmVCU, the printed circuit board in 3D

    VCU

    matatma23-gento/embedded-portfolio

    This repository collects KiCad hardware design projects. Project specifications, validation results, and individual contributions are being documented; the presence of design files does not imply production readiness or…

    166 parts
  • 2 layers88.9 × 92.5 mmAntenna board, the printed circuit board in 3D

    Antenna board

    Olin-Rocketry/sensing

    Sensing hardware and software

    31 parts
  • 4 layers85 × 75 mmStarter, the printed circuit board in 3D

    Starter

    opensimgear/device-template

    Work-in-progress STM32G0B1 input/output module with USB HID or CDC-only profiles, Cyphal/CAN, persistent settings, ordered panel events, leased LED/display actions, KiCad hardware and native simulation.

    111 parts
  • 4 layers120 × 145 mmMonitoring cell, the printed circuit board in 3D

    Monitoring cell

    pratham-cloud-ctrl/Project-SCCI-RH

    A digital spinal cord-computer interface concept: research, eight KiCad boards, nRF5340 firmware and FreeCAD assemblies.

    75 parts
  • 4 layers100 × 66.2 mmTop PCB, the printed circuit board in 3D

    Top PCB

    StanZalewski/Autonomous-remote-monitoring-system-based-on-the-LoRaWAN-protocol

    Solar-powered LoRaWAN weather station — 3 custom PCBs, bare-metal STM32, 4.3 km verified link

    57 parts
  • 2 layers140 × 120 mmJS POWER BD DV5, the printed circuit board in 3D

    JS POWER BD DV5

    SungKeun-Kim/Embedded_Project

    AVR,STM32,KiCAD

    119 parts
  • 2 layers200 × 150 mmMulti Mega Main V2, the printed circuit board in 3D

    Multi Mega Main V2

    SungKeun-Kim/Embedded_Project

    AVR,STM32,KiCAD

    193 parts
  • 2 layers200 × 150 mmMulti Mega Main V3, the printed circuit board in 3D

    Multi Mega Main V3

    SungKeun-Kim/Embedded_Project

    AVR,STM32,KiCAD

    202 parts
  • 2 layers150 × 98 mmPOWER BD NV2, the printed circuit board in 3D

    POWER BD NV2

    SungKeun-Kim/Embedded_Project

    AVR,STM32,KiCAD

    97 parts
  • 2 layers150 × 98 mmPOWER BD SV6, the printed circuit board in 3D

    POWER BD SV6

    SungKeun-Kim/Embedded_Project

    AVR,STM32,KiCAD

    102 parts
  • 2 layers170 × 96 mmSMD POWER BD DV6, the printed circuit board in 3D

    SMD POWER BD DV6

    SungKeun-Kim/Embedded_Project

    AVR,STM32,KiCAD

    118 parts
  • 2 layers100 × 75 mmDual radio carrier, the printed circuit board in 3D

    Dual radio carrier

    the-Drunken-coder/dual-band-radio-lab

    100 × 75 mm, two copper layers, 1.6 mm PCB. One design supports two identical test nodes. Each carrier takes one USB-C controller and two interchangeable LR2021 radio modules.

    28 parts