4 layers
MagneticLevitation
dweggg/MagneticLevitation
My take on one of those active magnetic levitation projects.
149 parts
2 layers34 × 71.8 mm
Putkiranta
zouppen/putkirantaJotakin sekoilua
- Size
- 34 × 71.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 28
- Pads
- 104
- Tracks, vias
- 115, 26
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Oct 2023
- Updated
- 2 Oct 2023
Overview
Putkiranta is an open-source printed circuit board by zouppen, from the zouppen/putkiranta repository on GitHub. It is a 2-layer board of 34 × 71.8 mm with 18 parts on 28 nets, routed with 115 tracks and 26 vias.
It is built around the STM8S003F3P6, SP3485EN-Y and SRV05-4, with the P6SMAJ33CA among its other parts. Its parts include 4 ICs, 3 capacitors, 3 connectors, 2 resistors and 2 diodes. It belongs with the STM8 boards of this library.
Main components
4
STM8S003F3P6
TSSOP-20-40℃~+85℃ 10bit 128Byte 16 16MHz 1KB 2.95V~5.5V 8 Bit 8KB Built-in FLASH STM8 TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
SP3485EN-Y
SOP-8SOP-8 RS-485 / RS-422 ICs ROHSYLPTECRS-485 / RS-422 ICs
SRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
P6SMAJ33CA
DO-214AC(SMA)-55℃~+150℃ 11.3A 1uA 33V 40.6V 53.3V 600W@10/1000us Bidirectional IEC 61000-4-2 TVS DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSLiownESD And Surge Protection (TVS/ESD)
README
README.mdputkiranta
Jotakin sekoilua
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 180 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | AMSRI-783.3-NZ | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U2 |
| 1 | Conn_01x04_Male | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | P6SMAJ33CA | Diode_SMD:D_SMA_Handsoldering | D1 |
| 1 | SP3485EN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | STM8S003F3P | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | Screw_Terminal_01x04 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_4-G-3.5_1x04_P3.50mm_Vertical | J1 |
| 1 | TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J3 |
Questions
How big is the Putkiranta PCB?
It measures 34 × 71.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Putkiranta use?
18 parts, built around the STM8S003F3P6, SP3485EN-Y, SRV05-4 and P6SMAJ33CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Putkiranta KiCad files?
From the zouppen/putkiranta repository on GitHub, at the commit this page was made from: the board is putkiranta/putkiranta.kicad_pcb and its schematic putkiranta/putkiranta.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Putkiranta design in my own project?
Its repository states no licence, so its author keeps all rights: ask zouppen before reusing the design.
Similar boards
- 2 layers50 × 72 mm
- 2 layers65 × 35 mm
- 2 layers87 × 71 mm
- 2 layers32.1 × 41.2 mm
Ir signalgen lite
dilshan/ir-clone
Open-source infrared remote control signal analysis and generating tool
40 parts58MIT - 4 layers26.4 × 56 mm
RPI5-SDexpress Hat
will127534/RPI5-SDexpress-Hat
ctrl-c "RPI5-CFE-Hat" ctrl-v "RPI5-SDexpress-Hat"
51 parts37MIT - 4 layers65 × 56 mm
- 4 layers
Kvm base
thatoddmailbox/kvm-base
The main board for the open-source HDMI KVM switch I built.
70 parts19