2 layers35.6 × 12.7 mm
2 layers64.8 × 25.4 mm
Fpv board
zaerik/RAPTORRAPTOR Advanced Platform for TeleOperated Reconnaissance
- Size
- 64.8 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 13
- Pads
- 52
- Tracks, vias
- 108, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 7 Mar 2014
- Updated
- 26 Nov 2023
Overview
Fpv board is an open-source printed circuit board by zaerik, from the zaerik/RAPTOR repository on GitHub, published under the MIT licence. It is a 2-layer board of 64.8 × 25.4 mm with 14 parts on 13 nets, routed with 108 tracks and 9 vias.
It is built around the L78M05CV and LD1117DT33. Its parts include 8 switches, 3 ICs and 2 connectors.
Main components
2
L78M05CV
TO-2200℃~+150℃@(Tj) 1 2V 35V 40uV 500mA 5V 62dB@(120Hz) 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LD1117DT33
TO-252-20℃~+125℃@(Tj) 1 1.2V@(800mA) 100uVrms 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection Positive TO-252-2 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsLinear Voltage Regulators (LDO)
README
README.mdRAPTOR
RAPTOR Advanced Platform for TeleOperated Reconnaissance
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | CONN_3 | PIN_ARRAY_3X1 | K1, K2, K3 |
| 3 | SWITCH_INV | solder_jumper_3 | SW1, SW2, SW4 |
| 2 | CONN_2 | PIN_ARRAY_2X1 | P1, P2 |
| 1 | 4-SW_DIP | 4-SW_DIP | SW3 |
| 1 | CONN_3 | RP-SMA_board_mount_back | KB4 |
| 1 | CONN_3 | RP-SMA_board_mount | K4 |
| 1 | L78M05 | DPAK2_L78M05 | U2 |
| 1 | LD1117DT33 | DPAK2_LD1117DT33 | U1 |
| 1 | TX-5800-200 | TX_5800_200 | U3 |
More from zaerik/RAPTOR
1Similar boards
- 2 layers65 × 100 mm
JBclone soldering station
Minu-IU3IRR/JBclone-soldering-station
Multi channel DIY soldering station with JBC tip support
55 parts13 - 6 layers100.3 × 68.6 mm
MYRIAD RD 5.1.2.unrouted
aspdac-submission-pcb-layout/PCB-Layout-Framework
This repository has been prepared from the original. Some care has been taken to remove the names of the authors.
984 parts7BSD-3-Clause - 2 layers70 × 38 mm
- 2 layers169.4 × 48.8 mm
Usb morse keyer
dilshan/usb-morse-keyer
PIC16F886 based CW auto key controller with USB support
84 parts17MIT - 2 layers121 × 75.5 mm
Jlctest
cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA
46 parts5 - 2 layers50 × 50 mm
- 2 layers110.5 × 104.1 mm
Pjc kicad
jdeguire/pjcontroller
Hardware and software for controlling your homebuilt video-beaming creation.
89 partsGPL-3.0 - 2 layers103 × 67.8 mm
Questions
How big is the Fpv board PCB?
It measures 64.8 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fpv board use?
14 parts, built around the L78M05CV and LD1117DT33. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fpv board KiCad files?
From the zaerik/RAPTOR repository on GitHub, at the commit this page was made from: the board is electronics/fpv_board/kicad/fpv_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fpv board design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).