2 layers101.6 × 53.3 mm
Bm1.routed
aspdac-submission-pcb-layout/PCB-Layout-Framework
This repository has been prepared from the original. Some care has been taken to remove the names of the authors.
64 parts7BSD-3-Clause
6 layers100.3 × 68.6 mm
MYRIAD RD 5.1.2.unrouted
aspdac-submission-pcb-layout/PCB-Layout-Framework7This repository has been prepared from the original. Some care has been taken to remove the names of the authors.
- Size
- 100.3 × 68.6 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 984
- Nets
- 184
- Pads
- 1,840
- Tracks, vias
- 0, 0
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Aug 2020
- Updated
- 11 Aug 2020
Overview
MYRIAD RD 5.1.2.unrouted is an open-source printed circuit board by aspdac-submission-pcb-layout, from the aspdac-submission-pcb-layout/PCB-Layout-Framework repository on GitHub, published under the BSD-3-Clause licence. It is a 6-layer board of 100.3 × 68.6 mm with 984 parts on 184 nets.
It is built around the CDCV304PW, BTH-030-01-F-D-A and LP2985IM5-1.8, with the LD1117DT33, TC1-1-13MA+ and TC4-25X+ among its other parts. Its parts include 95 capacitors, 75 resistors, 18 inductors, 8 crystals and 1 switch.
Main components
6
CDCV304PW
TSSOP-8-40℃~+85℃ 1 2.3V~3.6V 200MHz 4 TSSOP-8 Clock Buffers, Drivers, Distributors ROHSTexas InstrumentsClock Buffers, Drivers, DistributorsBTH-030-01-F-D-A
SMD,P=0.5mm0.5mm 2 60P Gold Surface Mount,Vertical SMD,P=0.5mm Board-to-Board and Backplane Connector ROHSSamtecBoard-To-Board And Backplane Connector
LP2985IM5-1.8
SOT-23-5-40℃~+125℃@(Tj) 1 1.8V 150mA 16V 28uA 30uVrms 350mV@(150mA) 45dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LD1117DT33
TO-252-20℃~+125℃@(Tj) 1 1.2V@(800mA) 100uVrms 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection Positive TO-252-2 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsLinear Voltage Regulators (LDO)
TC1-1-13MA+
SMD-5P-40℃~+85℃ 0.5dB 31.52dB 3° 4.5MHz~3GHz 50Ω:50Ω SMD-5P Balun ROHSMini-CircuitsBalunTC4-25X+
SMD-5P-40℃~+85℃ 1:4 500MHz~2.5GHz 8.37dB SMD-5P Balun ROHSMini-CircuitsBalun
README
README.mdA note for ASP-DAC 2021 reviewers:
This repository has been prepared from the original. Some care has been taken to remove the names of the authors. This may have led to some odd wording in the files because an automated processes was used for the blinding. Also, the git submodules were merged in to a single git repository. This has led to some duplicate code where there was originally just a pointer.
PCB-Layout-Framework
Top-level app for PCB P&R flow
Documentation
Prerequisites
- GCC >=4.8
- G++ >= 4.8
export CXX=g++- SWIG >= 2.0
sudo apt-get update
sudo apt-get install swig- Boost >= 1.6
sudo apt-get update
sudo apt-get install libboost-all-dev- CMake >= 3.1
sudo apt-get update
sudo apt-get install cmake- Current support for kicad_pcb format derived from KiCad v5.1.2
Current issues
- Tested on CentOS 6
- Tested on Ubuntu 18.04 (Ubuntu 16.04 doesn't come with Python 3)
- Linking shared object files after swig compilation currently fails on OSX. Docker is a good workaround on OSX.
License
- BSD-3-clause License [Link]
Parts
984| Qty | Value | Footprint | References |
|---|---|---|---|
| 520 | Val** | Via_4_2 | Via_4_2, Via_4_2, Via_4_2, Via_4_2, Via_4_2, Via_4_2, Via_4_2, Via_4_2, Via_4_2, Via_4_2, Via_4_2, Via_4_2, Via_4_2, Via_4_2, Via_4_2, Via_4_2 +504 |
| 152 | VAL** | Pad_circle | Pad_circle, Pad_circle, Pad_circle, Pad_circle, Pad_circle, Pad_circle, Pad_circle, Pad_circle, Pad_circle, Pad_circle, Pad_circle, Pad_circle, Pad_circle, Pad_circle, Pad_circle, Pad_circle +136 |
| 84 | Via_5_3 | , , , , , , , , , , , , , , , +68 | |
| 28 | 100nF | C_SM0402 | C3, C10, C11, C12, C19, C28, C30, C32, C35, C37, C216, C217, C218, C219, C220, C224 +12 |
| 17 | 0 | R_SM0402 | R4, R12, R18, R23, R24, R25, R26, R27, R28, R29, R42, R44, R46, R139, R153, R164 +1 |
| 16 | 100MHz/600/0.2A | R_SM0402 | R6, R7, R8, R9, R10, R11, R13, R14, R15, R19, R20, R21, R22, R37, R40, R87 |
| 13 | 100pF | C_SM0402 | C26, C27, C51, C54, C56, C57, C59, C60, C61, C63, C69, C77, C101 |
| 13 | 33pF | C_SM0402 | C53, C55, C73, C78, C105, C106, C109, C110, C111, C112, C113, C114, C115 |
| 8 | VAL** | Fiducial | Fiducial, Fiducial, Fiducial, Fiducial, Fiducial, Fiducial, Fiducial, Fiducial |
| 7 | 10K | R_SM0402 | R83, R84, R85, R94, R95, R96, R98 |
| 7 | 22 | R_array | R16, R17, R38, R39, R45, R47, R48 |
| 6 | 1uF | C_SM0603 | C22, C23, C81, C88, C122, C144 |
| 5 | 12nH | L_SM0402 | L32, L36, L37, L38, L40 |
| 5 | 1uF | C_SM0402 | C1, C2, C5, C6, C20 |
| 5 | 47 | R_SM0402 | R130, R131, R132, R133, R134 |
| 4 | 10nF | C_SM0402 | C14, C17, C25, C136 |
| 4 | 36nH | L_SM0402 | L11, L12, L13, L33 |
| 4 | 4.7nH | L_SM0402 | L17, L22, L34, L35 |
| 4 | 51 | R_SM0402 | R59, R60, R63, R64 |
| 4 | VAL** | Pad | Pad, Pad, Pad, Pad |
| 3 | mounting_via | , , | |
| 3 | 1.0pF | C_SM0402 | C21, C34, C72 |
| 3 | 1.2pF | C_SM0402 | C36, C44, C49 |
| 3 | 1.8pF | C_SM0402 | C91, C92, C93 |
| 3 | 100MHz/60/1A | R_SM0805 | R41, R211, R215 |
| 3 | 10uF | C_SM0603 | C52, C222, C223 |
| 3 | 1M | R_SM0402 | R2, R3, R50 |
| 3 | 5.6nH | L_SM0402 | L27, L28, L29 |
| 2 | 0 | R_SM0805 | R1, R82 |
| 2 | 0.5pF | C_SM0402 | C33, C120 |
| 2 | 150pF | C_SM0402 | C15, C18 |
| 2 | 1K2 | R_SM0402 | R30, R32 |
| 2 | 2.2uF | C_SM0603 | C24, C117 |
| 2 | 22 | R_SM0402 | R74, R75 |
| 2 | 3.9pF | C_SM0402 | C94, C95 |
| 2 | 470pF | C_SM0402 | C13, C16 |
| 2 | 5-104348-3 | VR_pinhead5 | X4, X5 |
| 2 | 8.2pF | C_SM0402 | C31, C68 |
| 2 | 820 | R_SM0402 | R31, R33 |
| 2 | BTH-030-01-F-D-A | BTH-030-01-F-D-A | X3, X10 |
| 2 | LP2985IM5-1.8 | SOT23-5 | DA2, DA7 |
| 2 | SMA8401-0000 | SMA | X6, X7 |
| 1 | 10pF | C_SM0402 | C221 |
| 1 | 12K | R_SM0402 | R34 |
| 1 | 15nH | L_SM0402 | L26 |
| 1 | 1nF | C_SM0402 | C29 |
| 1 | 22nH | L_SM0402 | L42 |
| 1 | 390 | R_SM0402 | R35 |
| 1 | 470 | R_SM0402 | R43 |
| 1 | 49.9 | R_SM0402 | R69 |
| 1 | 5-146285-2 | pinhead2 | X2 |
| 1 | 6K8 | R_SM0402 | R36 |
| 1 | CDCV304PW | TSSOP-8 | DA4 |
| 1 | CONN_6 | pinhead6 | X9 |
| 1 | LD1117DT33 | DPAK2 | DA1 |
| 1 | LED | LD0603 | LD1 |
| 1 | LMS6002DR2 | DQFN-120_via_off_pad | DA3 |
| 1 | PE42422 | QFN12 | DA6 |
| 1 | PE42440 | QFN-3x3-16L | DA5 |
| 1 | POT | RT_SMD | RT1 |
| 1 | RACON_TXCO_NF | SMD_TXCO | XO1 |
| 1 | RTX5032A_30.72MHZ | SMD_RTX5032A | XO2 |
| 1 | SW | Switch_2way | SW1 |
| 1 | Shield | EK | EK1 |
| 1 | TC1-1-13MA+ | TC1-1-13MA+ | T1 |
| 1 | TC4-25X+ | TC1-1-13MA+ | T2 |
| 1 | VAL** | MYRIAD_RF_Logo | Logo |
| 1 | VAL** | Parallella-I | Parallella-I |
More from aspdac-submission-pcb-layout/PCB-Layout-Framework
8- 2 layers89 × 58 mm
Bm4.routed
aspdac-submission-pcb-layout/PCB-Layout-Framework
This repository has been prepared from the original. Some care has been taken to remove the names of the authors.
63 parts7BSD-3-Clause - 6 layers86.4 × 54.6 mm
Porcupine 5.1.2.routed
aspdac-submission-pcb-layout/PCB-Layout-Framework
This repository has been prepared from the original. Some care has been taken to remove the names of the authors.
40 parts7BSD-3-Clause - 2 layers43.1 × 45.1 mm
Para 5.1.2.routed
aspdac-submission-pcb-layout/PCB-Layout-Framework
This repository has been prepared from the original. Some care has been taken to remove the names of the authors.
13 parts7BSD-3-Clause - 4 layers97.8 × 71.1 mm
Meta breakout 5.1.2.unrouted
aspdac-submission-pcb-layout/PCB-Layout-Framework
This repository has been prepared from the original. Some care has been taken to remove the names of the authors.
8 parts7BSD-3-Clause - 2 layers50.9 × 49.6 mm
Bm2.artificial
aspdac-submission-pcb-layout/PCB-Layout-Framework
This repository has been prepared from the original. Some care has been taken to remove the names of the authors.
4 parts7BSD-3-Clause - 12 layers
Ddr3l dummy testcase-12layers
aspdac-submission-pcb-layout/PCB-Layout-Framework
This repository has been prepared from the original. Some care has been taken to remove the names of the authors.
2 parts7BSD-3-Clause - 6 layers
Ddr3l dummy testcase-6layers
aspdac-submission-pcb-layout/PCB-Layout-Framework
This repository has been prepared from the original. Some care has been taken to remove the names of the authors.
2 parts7BSD-3-Clause
Similar boards
- 2 layers36 × 64 mm
Extension clk adc
oscimp/oscimpDigital
OscillatorIMP ecosystem for the digital characterization of ultrastable oscillators and Software Defined Radio (SDR) frontend processing
34 parts59 - 2 layers101.1 × 101.1 mm
- 2 layers65 × 100 mm
JBclone soldering station
Minu-IU3IRR/JBclone-soldering-station
Multi channel DIY soldering station with JBC tip support
55 parts13 - 2 layers70 × 38 mm
- 2 layers64.8 × 25.4 mm
- 6 layers59 × 62 mm
- 6 layers107 × 78 mm
Zipper
myriadrf/reference-development-kit
The Myriad-RF Reference Hardware design files and firmware
945 parts49 - 4 layers115 × 82.3 mm
MainPCB
HelloAlex4/Maturitaetsarbeit-Design-and-Development-of-a-Portable-Stereoscopic-Wigglegram-Camera
Documentation of the merged wigglegram camera
288 parts12
Questions
How big is the MYRIAD RD 5.1.2.unrouted PCB?
It measures 100.3 × 68.6 mm and has 6 copper layers, 1.6 mm thick.
What parts does the MYRIAD RD 5.1.2.unrouted use?
984 parts, built around the CDCV304PW, BTH-030-01-F-D-A, LP2985IM5-1.8 and LD1117DT33. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MYRIAD RD 5.1.2.unrouted KiCad files?
From the aspdac-submission-pcb-layout/PCB-Layout-Framework repository on GitHub, at the commit this page was made from: the board is module/SA-PCB/module/KicadParser/cases/parallella/paralime/MYRIAD_RD_5.1.2.unrouted.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MYRIAD RD 5.1.2.unrouted design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).