

EOutside
PCB Layouts for TEDx ORB Struts
- Size
- 283.3 × 6.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 38
- Pads
- 287
- Tracks, vias
- 995, 141
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Feb 2019
- Updated
- 30 May 2019
Overview
EOutside is an open-source printed circuit board by Yona-Appletree, from the Yona-Appletree/TEDXOrbLEDs repository on GitHub. It is a 4-layer board of 283.3 × 6.5 mm with 90 parts on 38 nets, routed with 995 tracks and 141 vias.
It is built around the WS2813C. Its parts include 39 connectors, 17 capacitors, 17 resistors and 17 diodes.
Main components
1Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | DAT_BRIDGE | YonaFootprints:TEDX_DAT_BRIDGE | J7, J7, J7, J7, J10, J10, J10, J11, J11, J11, J14, J14, J14, J15, J15, J15 +9 |
| 17 | .1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8, C10, C11, C12, C13, C14, C15, C16, C17 +1 |
| 17 | 330 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R10, R11, R12, R13, R14, R15, R16, R17 +1 |
| 17 | WS2813 | LED_SMD:LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | D1, D2, D3, D4, D5, D6, D7, D8, D10, D11, D12, D13, D14, D15, D16, D17 +1 |
| 14 | PWR_BRIDGE | YonaFootprints:TEDX_PWR_BRIDGE | J6, J6, J6, J6, J6, J6, J6, J6, J6, J6, J6, J6, J6, J6 |
More from Yona-Appletree/TEDXOrbLEDs
9- 4 layers297.3 × 148 mm

- 4 layers339.1 × 244.4 mm

- 4 layers320 × 210 mm

- 2 layers325 × 185 mm

- 4 layers250 × 40.5 mm

- 4 layers307.8 × 77.8 mm

- 2 layers307.7 × 21.4 mm

- 4 layers279.2 × 20.2 mm

- 2 layers231.2 × 14.3 mm

Similar boards
- 2 layers220 × 18 mm

- 2 layers

- 2 layers71.1 × 120.9 mm

- 2 layers68.6 × 95.3 mm

- 2 layers18 × 220 mm

- 2 layers95.8 × 76.2 mm

- 2 layers25.4 × 40.1 mm

PTL IR remote
PostTenebrasLab/PTL-IR_remote
IR remote based on esp8266 with OTA, MQTT, web server, DHT22, brightness, IRM
22 parts1GPL-3.0 - 2 layers

MM01
adampisula/modmidi
ModMIDI is a modular MIDI hardware and software project. This repository brings the base board, pad shield, extension board, and shared Arduino library together in one monorepo.
93 partsMIT
Questions
How big is the EOutside PCB?
It measures 283.3 × 6.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the EOutside use?
90 parts, built around the WS2813C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EOutside KiCad files?
From the Yona-Appletree/TEDXOrbLEDs repository on GitHub, at the commit this page was made from: the board is EOutside/EOutside.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the EOutside design in my own project?
Its repository states no licence, so its author keeps all rights: ask Yona-Appletree before reusing the design.