

PCB Layouts for TEDx ORB Struts
- Size
- 339.1 × 244.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 942
- Nets
- 33
- Pads
- 3,234
- Tracks, vias
- 5,984, 564
- Pours
- 62
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Feb 2019
- Updated
- 30 May 2019
Overview
Panel2 is an open-source printed circuit board by Yona-Appletree, from the Yona-Appletree/TEDXOrbLEDs repository on GitHub. It is a 4-layer board of 339.1 × 244.4 mm with 942 parts on 33 nets, routed with 5,984 tracks and 564 vias.
It is built around the WS2813C. Its parts include 256 capacitors, 256 resistors, 256 diodes and 35 connectors.
Main components
1Parts
942| Qty | Value | Footprint | References |
|---|---|---|---|
| 256 | 100NF | Capacitor_SMD:C_0805_2012Metric | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 +240 |
| 256 | 330 | Resistor_SMD:R_0805_2012Metric | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 +240 |
| 256 | WS2813 | LED_SMD:LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1 +240 |
| 7 | IN | YonaFootprints:1x3_18awgWireSolderPad-5mm | J1, J1, J1, J1, J1, J1, J1 |
| 7 | OUT | YonaFootprints:1x3_18awgWireSolderPad-5mm | J2, J2, J2, J2, J2, J2, J2 |
| 6 | IN | YonaFootprints:1x3_18awgWireSolderPad-InsideStrut | J1, J1, J1, J1, J1, J1 |
| 6 | OUT | YonaFootprints:1x3_18awgWireSolderPad-InsideStrut-OUT | J2, J2, J2, J2, J2, J2 |
| 2 | A_IN | YonaFootprints:1x3_18awgWireSolderPad-5mm | J1, J1 |
| 2 | A_OUT | YonaFootprints:1x3_18awgWireSolderPad-5mm | J2, J2 |
| 1 | A_IN | YonaFootprints:1x3_18awgWireSolderPad-InsideStrut-IN-Edge | J1 |
| 1 | A_OUT | YonaFootprints:1x3_18awgWireSolderPad-InsideStrut-OUT-Edge | J2 |
| 1 | Conn_01x02_Female | YonaFootprints:1x3_18awgWireSolderPad-InsideStrut-PWR | J3 |
| 1 | IN | YonaFootprints:1x3_18awgWireSolderPad | J1 |
| 1 | OUT | YonaFootprints:1x3_18awgWireSolderPad | J2 |
The 803 most common of 942 parts.
More from Yona-Appletree/TEDXOrbLEDs
9- 4 layers297.3 × 148 mm

- 4 layers320 × 210 mm

- 2 layers325 × 185 mm

- 4 layers250 × 40.5 mm

- 4 layers307.8 × 77.8 mm

- 4 layers283.3 × 6.5 mm

- 2 layers307.7 × 21.4 mm

- 4 layers279.2 × 20.2 mm

- 2 layers231.2 × 14.3 mm

Similar boards
- 2 layers220 × 18 mm

- 2 layers

- 2 layers71.1 × 120.9 mm

- 2 layers68.6 × 95.3 mm

- 2 layers18 × 220 mm

- 2 layers95.8 × 76.2 mm

- 2 layers25.4 × 40.1 mm

PTL IR remote
PostTenebrasLab/PTL-IR_remote
IR remote based on esp8266 with OTA, MQTT, web server, DHT22, brightness, IRM
22 parts1GPL-3.0 - 2 layers

MM01
adampisula/modmidi
ModMIDI is a modular MIDI hardware and software project. This repository brings the base board, pad shield, extension board, and shared Arduino library together in one monorepo.
93 partsMIT
Questions
How big is the Panel2 PCB?
It measures 339.1 × 244.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Panel2 use?
942 parts, built around the WS2813C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel2 KiCad files?
From the Yona-Appletree/TEDXOrbLEDs repository on GitHub, at the commit this page was made from: the board is Panel2/Panel2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Yona-Appletree before reusing the design.