

TestPanel1
PCB Layouts for TEDx ORB Struts
- Size
- 307.8 × 77.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 252
- Nets
- 40
- Pads
- 840
- Tracks, vias
- 2,046, 446
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Feb 2019
- Updated
- 30 May 2019
Overview
TestPanel1 is an open-source printed circuit board by Yona-Appletree, from the Yona-Appletree/TEDXOrbLEDs repository on GitHub. It is a 4-layer board of 307.8 × 77.8 mm with 252 parts on 40 nets, routed with 2,046 tracks and 446 vias.
It is built around the WS2813C. Its parts include 64 capacitors, 64 resistors, 64 diodes and 28 connectors.
Main components
1Parts
252| Qty | Value | Footprint | References |
|---|---|---|---|
| 64 | .1uF | Capacitor_SMD:C_0603_1608Metric | C1, C1, C1, C1, C10, C10, C10, C10, C11, C11, C11, C11, C12, C12, C12, C12 +48 |
| 64 | 330 | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R1, R10, R10, R10, R10, R11, R11, R11, R11, R12, R12, R12, R12 +48 |
| 64 | WS2813 | LED_SMD:LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | D1, D1, D1, D1, D10, D10, D10, D10, D11, D11, D11, D11, D12, D12, D12, D12 +48 |
| 12 | PWR_BRIDGE | YonaFootprints:TEDX_PWR_BRIDGE_TALL | J3, J3, J3, J3, J3, J3, J3, J3, J4, J4, J4, J4 |
| 4 | BOUT2_ENABLE | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP4, JP4, JP4, JP4 |
| 4 | DAT_BRIDGE | YonaFootprints:TEDX_DAT_BRIDGE_TALL | J4, J4, J6, J6 |
| 4 | DOUT2_ENABLE | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3, JP3, JP3, JP3 |
| 4 | IN | YonaFootprints:TEDX_INNER_4 | J1, J1, J1, J1 |
| 4 | IN2 | YonaFootprints:TEDX_IN2 | J2, J2, J2, J2 |
| 4 | OUT | YonaFootprints:TEDX_INNER_4 | J5, J5, J5, J5 |
The 228 most common of 252 parts.
More from Yona-Appletree/TEDXOrbLEDs
9- 4 layers297.3 × 148 mm

- 4 layers339.1 × 244.4 mm

- 4 layers320 × 210 mm

- 2 layers325 × 185 mm

- 4 layers250 × 40.5 mm

- 4 layers283.3 × 6.5 mm

- 2 layers307.7 × 21.4 mm

- 4 layers279.2 × 20.2 mm

- 2 layers231.2 × 14.3 mm

Similar boards
- 2 layers220 × 18 mm

- 2 layers

- 2 layers71.1 × 120.9 mm

- 2 layers68.6 × 95.3 mm

- 2 layers18 × 220 mm

- 2 layers95.8 × 76.2 mm

- 2 layers25.4 × 40.1 mm

PTL IR remote
PostTenebrasLab/PTL-IR_remote
IR remote based on esp8266 with OTA, MQTT, web server, DHT22, brightness, IRM
22 parts1GPL-3.0 - 2 layers

MM01
adampisula/modmidi
ModMIDI is a modular MIDI hardware and software project. This repository brings the base board, pad shield, extension board, and shared Arduino library together in one monorepo.
93 partsMIT
Questions
How big is the TestPanel1 PCB?
It measures 307.8 × 77.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the TestPanel1 use?
252 parts, built around the WS2813C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TestPanel1 KiCad files?
From the Yona-Appletree/TEDXOrbLEDs repository on GitHub, at the commit this page was made from: the board is TestPanel1/TestPanel1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TestPanel1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Yona-Appletree before reusing the design.