2 layers65 × 90 mm
2 layers18 × 220 mm
Ledpcb ws2813
CensoredUsername/NVGM4- Size
- 18 × 220 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 21
- Pads
- 113
- Tracks, vias
- 289, 107
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 20 May 2022
- Updated
- 10 Aug 2025
Overview
Ledpcb ws2813 is an open-source printed circuit board by CensoredUsername, from the CensoredUsername/NVGM repository on GitHub. It is a 2-layer board of 18 × 220 mm with 39 parts on 21 nets, routed with 289 tracks and 107 vias.
It is built around the WS2813C and 1N4148W. Its parts include 12 diodes, 10 resistors, 9 capacitors and 3 connectors.
Main components
2
WS2813C
SMD5050-6P0.6mA 1.65mm 2kHz 5mm 800Kbit/s B:65mcd、R:280mcd、G:500mcd R:620nm~630nm、G:510nm~525nm、B:460nm~475nm 集成智能反向连接保护功能 SMD5050-6P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 220R | ledpcb:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 8 | 100nF | ledpcb:C_0603_1608Metric | C1, C2, C4, C5, C6, C7, C8, C9 |
| 8 | WS2813 | ledpcb:LED_WS2813_PLCC6_5.0x5.0mm_P1.6mm | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 |
| 4 | 1N4148W | ledpcb:D_SOD-123 | D1, D2, D3, D4 |
| 2 | 4mm | ledpcb:MountingHole_3.2mm_M3 | H1, H2 |
| 2 | JST_XA_B03B | ledpcb:JST_XA_B03B-XASK-1-A_1x03_P2.50mm_Vertical | J2, J3 |
| 1 | 22uF | ledpcb:C_Elec_6.3x5.4 | C3 |
| 1 | JST_XA_B04B | ledpcb:JST_XA_B04B-XASK-1-A_1x04_P2.50mm_Vertical | J1 |
| 1 | SMAZ5V6-13-F | ledpcb:D_SMA | ZD1 |
The 37 most common of 39 parts.
More from CensoredUsername/NVGM
4- 2 layers18 × 220 mm
- 2 layers
- 2 layers
Similar boards
- 2 layers220 × 18 mm
- 2 layers
- 2 layers71.1 × 120.9 mm
- 2 layers68.6 × 95.3 mm
- 2 layers95.8 × 76.2 mm
- 2 layers25.4 × 40.1 mm
PTL IR remote
PostTenebrasLab/PTL-IR_remote
IR remote based on esp8266 with OTA, MQTT, web server, DHT22, brightness, IRM
22 parts1GPL-3.0 - 2 layers
MM01
adampisula/modmidi
ModMIDI is a modular MIDI hardware and software project. This repository brings the base board, pad shield, extension board, and shared Arduino library together in one monorepo.
93 partsMIT - 2 layers500 × 325.5 mm
Questions
How big is the Ledpcb ws2813 PCB?
It measures 18 × 220 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ledpcb ws2813 use?
39 parts, built around the WS2813C and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ledpcb ws2813 KiCad files?
From the CensoredUsername/NVGM repository on GitHub, at the commit this page was made from: the board is ledpcb/ledpcb-ws2813/ledpcb-ws2813.kicad_pcb and its schematic coincounter/schematics/7segment.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ledpcb ws2813 design in my own project?
Its repository states no licence, so its author keeps all rights: ask CensoredUsername before reusing the design.