

Loraboard
The project was designed using KiCad and includes a complete schematic, PCB layout, and manufacturing files.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 58
- Pads
- 171
- Tracks, vias
- 144, 18
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 17 Jun 2026
- Updated
- 18 Jun 2026
Overview
Loraboard is an open-source printed circuit board by yansha2903-bot, from the yansha2903-bot/Loraboard repository on GitHub, published under the MIT licence. It is a 2-layer board with 25 parts on 58 nets, routed with 144 tracks and 18 vias.
It is built around the ESP32-S3-WROOM-1-N8, SX1262IMLTRT and AMS1117-3.3. Its parts include 10 capacitors, 4 resistors, 3 ICs, 3 inductors and 2 connectors. It belongs with the ESP32 boards of this library.
Main components
3ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesSX1262IMLTRT
QFN-24-EP(4x4)-148dBm -40℃~+85℃ 1.8V~3.7V 150MHz~960MHz 22dBm 300Kbps 32mA 4.2mA ISM SPI Supports software reset、Power-on reset function、Supports RSSI function transceiver QFN-24-EP(4x4) RF Transceiver ICs ROHSSEMTECHRF Transceiver ICsAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdLoraBoard
A custom ESP32-S3 LoRa development board designed for long-range wireless communication projects.
Overview
LoraBoard is a custom PCB designed around the ESP32-S3 microcontroller and the SX1262 LoRa transceiver. The board is intended for low-power, long-range communication applications such as mesh networking, remote monitoring, IoT devices, and sensor networks.
The project was designed using KiCad and includes a complete schematic, PCB layout, and manufacturing files.
Features
- ESP32-S3 microcontroller
- SX1262 LoRa transceiver
- USB connectivity for programming and power
- Compact PCB design
- Long-range wireless communication
- Suitable for Meshtastic and IoT applications
- Hardware
- Main Components
- ESP32-S3
- SX1262 LoRa Radio
- USB Interface
- Antenna Connector
- Repository Structure
Images
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C5, C10 |
| 3 | 10µF | Capacitor_SMD:C_1206_3216Metric | C2, C6, C7 |
| 2 | 10kΩ | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_PTS125Sx85PSMTR | SW1, SW2 |
| 1 | 12nH | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | 15µH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 2.7pF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 3.3pF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 3.9nH | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 32 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_Coaxial | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J2 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | SX1262IMLTRT | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
Similar boards
- 2 layers68.3 × 94.8 mm

- 2 layers43 × 54.7 mm

- 2 layers27.7 × 56 mm

MeshLora
RichardM-1337/Mesh-Lora-Board
This is a lora board and it's something I've never designed before so I'm attempting something new.
18 partsMIT - 2 layers60 × 38 mm

Loraguide
sectersion/loraguide
Hello! In this guide, you will create a custom Meshtastic-enabled LORA board with a microcontroller, antenna, radio chip, and other things.
27 parts - 2 layers26.2 × 54.6 mm

LoRa Shigihara
SovietCoffe404/LoRa-Shigihara
This is another HC project, this time is a LoRa board with an ESP32-S3, SX1262 radio, and U.FL antenna! :D
18 parts - 2 layers52.1 × 33.3 mm

LoRa board
samanbeer/LoRa_board
i saw a video about it. And saw how cool it is and I wanted to build custom meshtastic node and try the P2P comunication on it.
43 parts - 4 layers30.5 × 72.9 mm

- 4 layers51.9 × 75 mm

LORA DEVBOARD
Sash-Reek2010/The-Meshp32
An ESP32 based devboard who's main purpose is to run Meshtastic firmware!
34 partsMIT
Questions
What parts does the Loraboard use?
25 parts, built around the ESP32-S3-WROOM-1-N8, SX1262IMLTRT and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Loraboard KiCad files?
From the yansha2903-bot/Loraboard repository on GitHub, at the commit this page was made from: the board is Loraboard.kicad_pcb and its schematic Loraboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Loraboard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).