Skip to the content
4 layers51.9 × 75 mmLORA DEVBOARD, the printed circuit board in 3D

An ESP32 based devboard who's main purpose is to run Meshtastic firmware!

Size
51.9 × 75 mm
Copper layers
4
Thickness
1.6 mm
Parts
34
Nets
65
Pads
188
Tracks, vias
572, 77
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 May 2026
Updated
29 May 2026

Overview

LORA DEVBOARD is an open-source printed circuit board by Sash-Reek2010, from the Sash-Reek2010/The-Meshp32 repository on GitHub, published under the MIT licence. It is a 4-layer board of 51.9 × 75 mm with 34 parts on 65 nets, routed with 572 tracks and 77 vias.

It is built around the ESP32-S3-WROOM-1-N16R2, SX1262IMLTRT and AMS1117-3.3, with the BWU.FL-IPEX1, TP4056-42-ESOP8 and RKCGG140GSMTRLFS among its other parts. Its parts include 12 capacitors, 5 resistors, 5 ICs, 3 connectors and 2 switches. It belongs with the microcontroller boards and radio and wireless boards and the ESP32 boards of this library.

Main components

7

README

README.md

The Meshp32

An ESP32 based devboard who's main purpose is to run Meshtastic firmware! It has 22 pins broken out which can be used to attach an external screen and keyboard to transmit messages or even speakers for auditory output. It has a TP4056 so it can become a portable rechargable mestastic node in itself! It aslo features the SX126 as the LoRA board required for Meshtastic! In all, the components cost around 16 dollars in LCSC.

The Devboard

The Schematic

This schematic is made in KiCAD!

lora schematic

The PCB

This PCB is also made in KiCAD!

Devboard 1 Devboard 2

PCB View

Devboard 3 devboard 4

Case

Case The Meshp32 Case

Try it out!

KiCanvas Link

Meshtastic Firmware

https://github.com/meshtastic/meshtastic

Thanks for reading :D -Sashreek!

Parts

34
QtyValueFootprintReferences
5100nFCapacitor_SMD:C_0603_1608MetricC5, C6, C7, C8, C12
510uFCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4, C11
210kResistor_SMD:R_0603_1608MetricR4, R5
227pFCapacitor_SMD:C_0603_1608MetricC9, C10
25.1kResistor_SMD:R_0603_1608MetricR6, R7
2Conn_01x13Connector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_VerticalJ2, J4
2RKCGG140GSMTRLFSEasyeda2kicad:SW-SMD_4P-L3.0-W2.6-P1.80-LS3.5SW1, SW2
11.2kResistor_SMD:R_0603_1608MetricR3
115Inductor_SMD:L_0603_1608MetricL1
1AMS1117-3.3Easyeda2kicad:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BRU3
1BWU.FL-IPEX1Easyeda2kicad:IPEX-SMD_BWIPX-1-001EU5
1Crystal_GND24Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1ESP32-S3-WROOM-1Easyeda2kicad:WIRELM-SMD_ESP32-S3-WROOM-1U1
1JSTConnector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalJ3
1SX1262IMLTRTEasyeda2kicad:QFN-24_L4.0-W4.0-P0.50-BL-EP2.6U2
1TP4056Easyeda2kicad:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EPU4
1TYPEC-304-ACP16Easyeda2kicad:USB-C-SMD_TYPE-C-16P-1USB1

The 30 most common of 34 parts.

Similar boards

  • 4 layers216 × 144 mmSheet1, the printed circuit board in 3D

    Sheet1

    motor-and-motion-control-lab/mmlab-12PhaseDrive-388Slave

    PCB Electronics for Humanoid Robots and Bearingless Motor Systems

    620 parts3GPL-3.0
  • 2 layers120 × 102.5 mmDsug cctv BOARD, the printed circuit board in 3D

    Dsug cctv BOARD

    LucasLHenry/spelltwister

    This is the third version of the code for the Spelltwister module with CCTV. This version uses the Arduino platform and the RP2040, a chip developed by Raspberry Pi for their RPi Pico board.

    251 partsMIT
  • 4 layers110 × 55 mmMain interface board, the printed circuit board in 3D

    Main interface board

    callumsnowden/emfkart

    A "go-kart" made from aluminium extrusion using hoverboard parts & an ODrive for propulsion.

    88 partsMIT
  • 2 layers80 × 38.5 mmLogic analyzer rp2040, the printed circuit board in 3D

    Logic analyzer rp2040

    pustowhite/rp2040-logic-analyzer

    An 8-channel RP2040 logic analyzer PCB designed in KiCad, with USB-C and selectable 1.8 V / 3.3 V input logic modes.

    66 parts
  • 6 layers90 × 89 mmModular processing board, the printed circuit board in 3D

    Modular processing board

    igorwolfs/modular-processing-hw

    MCU Breakout board with Hirose BM28B connector

    177 parts1
  • 2 layers193.3 × 111.3 mmGATEWAY HARDWARE V1, the printed circuit board in 3D

    GATEWAY HARDWARE V1

    kori-thespirit/LoraGatewayDevelopment

    224 partsMIT

Questions

How big is the LORA DEVBOARD PCB?

It measures 51.9 × 75 mm and has 4 copper layers, 1.6 mm thick.

What parts does the LORA DEVBOARD use?

34 parts, built around the ESP32-S3-WROOM-1-N16R2, SX1262IMLTRT, AMS1117-3.3 and BWU.FL-IPEX1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LORA DEVBOARD KiCad files?

From the Sash-Reek2010/The-Meshp32 repository on GitHub, at the commit this page was made from: the board is Source/KiCAD/LORA DEVBOARD.kicad_pcb and its schematic Source/KiCAD/LORA DEVBOARD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LORA DEVBOARD design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).