

Starlightremote
- Size
- 36.5 × 31.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 15
- Pads
- 48
- Tracks, vias
- 85, 0
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Oct 2022
- Updated
- 11 Oct 2022
Overview
Starlightremote is an open-source printed circuit board by xLordiz3, from the xLordiz3/PCBs repository on GitHub. It is a 2-layer board of 36.5 × 31.3 mm with 17 parts on 15 nets, routed with 85 tracks and 0 vias.
It is built around the ESP-01, LM1117-3.3 and IR204-A-L, with the MMBT2222A among its other parts. Its parts include 4 resistors, 2 capacitors, 2 ICs, 1 diode and 1 transistor. It belongs with the ESP8266 boards of this library.
Main components
4ESP-01
插件-20℃~+85℃ -90dBm 16dBm 2.4GHz 20mA 300mA 3V~3.6V 802.11b/g/n ESP8266 Chip Over-the-air (OTA) update UART 插件 WiFi Modules ROHSAi-ThinkerWiFi ModulesLM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedIR204-A-L
插件5.6mW/sr@IF=20mA 插件,D=3mm Infrared LED Emitters ROHSEverlight ElectronicsInfrared LED EmittersMMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 3 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R4 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_5x5.4 | C2 |
| 1 | 470 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | ESP-01 | ESP:ESP-01 | U2 |
| 1 | IR204A | LED_THT:LED_D3.0mm_IRBlack | D1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Polyfuse_Small | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | SW | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | S1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J1 |
More from xLordiz3/PCBs
12- 2 layers93.2 × 59.2 mm

- 2 layers

- 2 layers88.9 × 82.6 mm

- 2 layers65.4 × 66.8 mm

- 2 layers64.1 × 58.2 mm

- 2 layers64.8 × 49.5 mm

- 2 layers75.1 × 49.2 mm

- 2 layers91 × 96.6 mm

- 2 layers33.2 × 23 mm

- 2 layers111.5 × 93.7 mm

- 2 layers47.8 × 23.9 mm

- 2 layers55.9 × 47 mm

Similar boards
- 2 layers50 × 24.5 mm

- 2 layers204.5 × 121.9 mm

- 2 layers50 × 100 mm

- 2 layers100.1 × 99.9 mm

- 2 layers97.8 × 49.5 mm

- 2 layers70 × 33 mm

- 2 layers100 × 100 mm

Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
273 parts43MIT - 2 layers50 × 100 mm

DMX CTRL
michar71/DMX_CTRL
DMX512 Controller for light installations based on Bluepill STM32F103 Board
46 parts12
Questions
How big is the Starlightremote PCB?
It measures 36.5 × 31.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Starlightremote use?
17 parts, built around the ESP-01, LM1117-3.3, IR204-A-L and MMBT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Starlightremote KiCad files?
From the xLordiz3/PCBs repository on GitHub, at the commit this page was made from: the board is starlightremote/starlightremote.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Starlightremote design in my own project?
Its repository states no licence, so its author keeps all rights: ask xLordiz3 before reusing the design.