Skip to the content
2 layers10.9 × 34.5 mmDown, the printed circuit board in 3D

Finished

Size
10.9 × 34.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
38
Pads
126
Tracks, vias
353, 48
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
22 Aug 2019
Updated
12 Aug 2020

Overview

Down is an open-source printed circuit board by xiongyumail, from the xiongyumail/ESP-Debugger repository on GitHub. It is a 2-layer board of 10.9 × 34.5 mm with 28 parts on 38 nets, routed with 353 tracks and 48 vias.

It is built around the CP2104EK, SRV05-4 and S9014. Its parts include 8 capacitors, 5 diodes, 4 resistors, 4 ICs and 2 transistors.

Main components

3

README

README.md

ESP-Debugger

How to use

bash
git clone --recursive https://github.com/xiongyumail/esp-debugger

Show

t2 t3 t4 Down Down1 Down_cp_f Down_cp_b

Schematic

Down

Parts

28
QtyValueFootprintReferences
5LEDLED_SMD:LED_0603_1608MetricD1, D2, D3, D4, D5
31KResistor_SMD:R_0402_1005MetricR2, R3, R4
210uFCapacitor_SMD:C_0603_1608MetricC1, C3
21uFCapacitor_SMD:C_0603_1608MetricC2, C4
21uFCapacitor_SMD:C_0402_1005MetricC6, C8
2S9014Package_TO_SOT_SMD:SOT-23Q1, Q2
2SRV05-4Package_TO_SOT_SMD:SOT-23-6U2, U3
10.1uFCapacitor_SMD:C_0402_1005MetricC7
110KResistor_SMD:R_0402_1005MetricR1
11KResistor_SMD:R_Array_Convex_4x0402RN1
14.7uFCapacitor_SMD:C_0402_1005MetricC5
1AMS1117-LDOPackage_TO_SOT_SMD:SOT-223U4
1CP2104Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmU5
1Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ1
1HRO_TYPE-C-31-M-12USB:HRO_TYPE-C-31-M-12J2
1PPTCFuse:Fuse_0805_2012MetricF1
1SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP1

More from xiongyumail/ESP-Debugger

1
  • 2 layers88.9 × 85.5 mmDown cp, the printed circuit board in 3D

    Down cp

    xiongyumail/ESP-Debugger

    Finished

    396 parts4

Similar boards

  • 2 layers99.5 × 90.5 mmMRR ESPA, the printed circuit board in 3D

    MRR ESPA

    maplerainresearch/MRR_ESPA

    A basic 3D printer control board based on ESP32

    130 parts59
  • 2 layers102 × 102 mmMRR ESPE, the printed circuit board in 3D

    MRR ESPE

    maplerainresearch/MRR_ESPE

    MRR ESPE 3D printer control board

    168 parts39
  • 2 layers171 × 83.9 mmPilot6Axis v2, the printed circuit board in 3D

    Pilot6Axis v2

    X-Lemon-X/Pilot_6_axis

    DIY Remote Controler Build

    126 parts2MIT
  • 2 layers90 × 60 mmMixers, the printed circuit board in 3D

    Mixers

    k1zmt/SSB85MultiPCB

    WIP! Don't try repeating!

    133 parts1
  • 4 layers56 × 38 mmLaserOps PCB, the printed circuit board in 3D

    LaserOps PCB

    nico25112005/Nerf-ATG-Electronics

    This repository contains the electronic design files for a custom printed circuit board (PCB) developed to enhance Nerf LaserOps blasters.

    103 parts1
  • 2 layers28.2 × 1.4 mmRp2040 black vga, the printed circuit board in 3D

    Rp2040 black vga

    alex-snigir/Murmulator-RP2040-Black-Perfboard-VGA

    Сборка Мурмулятора (переходной платы от Raspberry Pi Pico / клона YD-RP2040 к периферии) с VGA-выходом, PS/2-клавиатурой, двумя джойстик-портами (с поддержкой Bluetooth-геймпадов через BlueRetro), аудиовыходом…

    65 parts
  • 2 layers75.9 × 70.3 mmDumpsterSAO, the printed circuit board in 3D

    DumpsterSAO

    aromans/DumpsterSAO

    Dumpster SAO Project for DC33

    21 parts
  • 2 layers142.2 × 106.7 mmSwitchFoil, the printed circuit board in 3D

    SwitchFoil

    falue/rebekkaSwitchFoil

    This repo is using a HLK-LD2450 microwave human presence sensor and a Sparkfun Thing Plus. This uses Micropython. See below for instructions to set it up.

    31 parts

Questions

How big is the Down PCB?

It measures 10.9 × 34.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Down use?

28 parts, built around the CP2104EK, SRV05-4 and S9014. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Down KiCad files?

From the xiongyumail/ESP-Debugger repository on GitHub, at the commit this page was made from: the board is Down.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Down design in my own project?

Its repository states no licence, so its author keeps all rights: ask xiongyumail before reusing the design.