

Baby steps
The materials (slides, ...) from the KiCAD introduction workshop at WüSpace e. V.
- Size
- 40.6 × 31.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 7
- Pads
- 26
- Tracks, vias
- 28, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Dec 2023
- Updated
- 7 Dec 2023
Overview
Baby steps is an open-source printed circuit board by wuespace, from the wuespace/kicad-introduction repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 40.6 × 31.8 mm with 13 parts on 7 nets, routed with 28 tracks and 0 vias.
It is built around the LMC6482IN. Its parts include 3 resistors, 2 capacitors, 1 IC, 1 diode and 1 connector.
Main components
1README
README.mdKiCad Introduction
This project hosts the source files for a lecture about the ECAD tool KiCad.
Presentation Folder
The presentation is done with LaTex beamer. The style file is custom tailored to the WüSpace CI guidelines (roboto and comfortaa font, correct accent purple) and can be swapped out if holding the lecture in a different context.
Tasks Folder
This folder is for KiCAD project files that correspond to the lecture. Currently there's only the
project baby-steps but more can be added for further advanced lectures.
License
CC BY-SA 4.0
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3 |
| 2 | C | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | D | LED_THT:LED_D5.0mm | D1 |
| 1 | G*** | kibuzzard-653A80DD | kibuzzard-653A80DD |
| 1 | G*** | kibuzzard-653A80D4 | kibuzzard-653A80D4 |
| 1 | G*** | kibuzzard-653A80F5 | kibuzzard-653A80F5 |
| 1 | LMC6482 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Vishay_T7-YA_Single_Vertical | RV1 |
Similar boards
- 2 layers101.6 × 53.3 mm

- 4 layers60 × 41 mm

Eog pcb kicad
neurotech-berkeley/eog-eye-tracking
Exploration of EOG (electrooculogram) signals as a potential human computer interface
82 parts7MIT - 2 layers100 × 75 mm

Adjustable Wireless Neuro Stimulator System
ElektroNeo/Adjustable-Wireless-Neuro-Stimulator-System
🧠 0-5.5mA adjustable wireless neurostimulator system made with PIC16F1713 and App Inventor.
33 parts5GPL-3.0 - 2 layers73.7 × 48.3 mm

- 2 layers85 × 70 mm

- 2 layers200 × 100 mm

- 2 layers42 × 20 mm

- 2 layers159 × 100 mm

Questions
How big is the Baby steps PCB?
It measures 40.6 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Baby steps use?
13 parts, built around the LMC6482IN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Baby steps KiCad files?
From the wuespace/kicad-introduction repository on GitHub, at the commit this page was made from: the board is tasks/baby-steps/baby-steps.kicad_pcb and its schematic tasks/baby-steps/baby-steps.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Baby steps design in my own project?
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).