

LightMeherGen2
A light meter designed for taking photo(用于摄影的测光表)
- Size
- 85 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 74
- Pads
- 246
- Tracks, vias
- 455, 153
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20220331)
- Created
- 24 Feb 2020
- Updated
- 26 Apr 2022
Overview
LightMeherGen2 is an open-source printed circuit board by Mime-AL, from the Mime-AL/Luxer-Light-meter repository on GitHub. It is a 2-layer board of 85 × 70 mm with 56 parts on 74 nets, routed with 455 tracks and 153 vias.
It is built around the BH1620FVC-TR, LMC6482IN and TP4056, with the XKB7070-Z among its other parts. Its parts include 23 capacitors, 11 resistors, 9 ICs, 3 connectors and 2 diodes.
Main components
4BH1620FVC-TR
WSOF-5-40℃~+85℃ 1.6mm 1.6mm 1klx 2.4V~5.5V 9uA Light Intensity WSOF-5 Ambient Light Sensors ROHSROHM SemiconductorAmbient Light SensorsLMC6482IN
PDIP-8-40℃~+85℃ 0.02pA 1.3V/us 1.5MHz 1uV/℃ 2 2pA 30mA 37nV/√Hz@1kHz 3V~15.5V 3mV 700uA 82dB ESD protection、Reverse-phase input protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Precision Op Amps ROHSTexas InstrumentsPrecision Op AmpsTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery ManagementXKB7070-Z
插件-15℃~+55℃ 1.6N 100,000 cycles 100mA 30V Blue Latching PC Pin Rectangular Button Through Hole Without 插件 Pushbutton Switches ROHSXKB ConnectionPushbutton Switches
README
README.mdLux-Light-meter
A light meter designed for taking photo(用于摄影的测光表)
如何制作
LMG2MB_gerber文件夹里面的zip去找板厂下单,建议嘉立创哑光黑阻焊,减少反光影响
LMG2MV_BOM.xlsx 对照采购原件,尤其注意type-c封装
R11限流电阻根据情况使用,我用的VA 3.3V的1602,选的0欧
安装luattool v2,下载库中的LuatOS-SoC_V0007_AIR103.soc和main.lua
调节旋钮,使液晶屏字符清晰,最好用陶瓷螺丝刀,小心短路
如何使用

B1 电源开关
B2 模式选择,长按在A(光圈优先),S(快门优先),L(低感光度光圈优先),I(感光度设置)模式之间切换
R1 曝光补偿旋钮
R2 参数旋钮
D1 电池电压,低于3.4时需要充电
D2 曝光误差,误差大于0.3EV时显示+,小于-0.3EV显示减号,大于±1EV显示E,小于±0.3EV显示=
D3 ISO值
D4 工作模式
D4 快门速度,速度低于1S会以“秒数"”格式显示
D6 光圈
D7 曝光补偿,设置感光度时该位置显示低感值
下载固件

按如图所示线序与CH340串口模块连接,TX和RX需要交叉,不连接VCC

按如图所示方法下载固件,开始下载后打开打开测光表电源
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nf | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C6, C7, C8, C9, C10, C16, C25 |
| 4 | 20pf | Capacitor_SMD:C_0603_1608Metric | C18, C19, C20, C21 |
| 4 | MountingHole | FP:MH_M1.5 | H1, H2, H3, H4 |
| 3 | 10uf | Capacitor_SMD:C_0603_1608Metric | C12, C14, C22 |
| 2 | 100uf | Capacitor_SMD:CP_Elec_6.3x5.4 | C23, C24 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 10uf | Capacitor_SMD:CP_Elec_4x4.5 | C15, C17 |
| 2 | 200 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | BCD8421_3-3 | FP:BCD8421_3-3 | U6, U7 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 2 | XKB7070-Z | FP:SW-TH_6P-L7.0-W7.0-P2.00 | SW1, SW2 |
| 1 | 1.2K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Vishay_T73XW_Horizontal | RV1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 4.22K | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 4.22k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 40MHz | Crystal:Crystal_SMD_TXC_7A-2Pin_5x3.2mm | Y1 |
| 1 | 510 | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | AIR103_CORE_QFN | FP:QFN-56_L6.0-W6.0-P0.35-BL-EP4.7 | U5 |
| 1 | BH1620FVC-TR | FP:WSOF-5_L1.6-W1.2-P0.50-TL | U3 |
| 1 | BH1620FVC-TR | FP:PinHeader_1x05_P1.27mm_Vertical_SMD_Pin1Right | U4 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | LMC6482 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | LN1134-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | RC1602A | Display:WC1602A | U8 |
| 1 | TP4056 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
More from Mime-AL/Luxer-Light-meter
1- 2 layers7.8 × 10 mm

Similar boards
- 2 layers101.6 × 53.3 mm

- 4 layers60 × 41 mm

Eog pcb kicad
neurotech-berkeley/eog-eye-tracking
Exploration of EOG (electrooculogram) signals as a potential human computer interface
82 parts7MIT - 2 layers100 × 75 mm

Adjustable Wireless Neuro Stimulator System
ElektroNeo/Adjustable-Wireless-Neuro-Stimulator-System
🧠 0-5.5mA adjustable wireless neurostimulator system made with PIC16F1713 and App Inventor.
33 parts5GPL-3.0 - 2 layers73.7 × 48.3 mm

- 2 layers200 × 100 mm

- 2 layers42 × 20 mm

- 2 layers159 × 100 mm

- 2 layers100 × 100 mm

Questions
How big is the LightMeherGen2 PCB?
It measures 85 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LightMeherGen2 use?
56 parts, built around the BH1620FVC-TR, LMC6482IN, TP4056 and XKB7070-Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LightMeherGen2 KiCad files?
From the Mime-AL/Luxer-Light-meter repository on GitHub, at the commit this page was made from: the board is hardware/LightMeherGen2.kicad_pcb and its schematic hardware/LightMeherGen2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LightMeherGen2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Mime-AL before reusing the design.