

LayoutBottom
Repo for ongoing Badge work
- Size
- 69.9 × 136.6 mm
- Copper layers
- 2
- Parts
- 59
- Nets
- 64
- Pads
- 237
- Tracks, vias
- 519, 107
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20220225)
- Created
- 6 May 2019
- Updated
- 29 Apr 2026
Overview
LayoutBottom is an open-source printed circuit board by wrickert, from the wrickert/RMABadge repository on GitHub. It is a 2-layer board of 69.9 × 136.6 mm with 59 parts on 64 nets, routed with 519 tracks and 107 vias.
It is built around the ESP32-S2-SOLO-N8, SK6812SIDE-A and HX4055M. Its parts include 14 capacitors, 12 connectors, 10 ICs, 6 switches and 5 resistors. It belongs with the ESP32 boards of this library.
Main components
3ESP32-S2-SOLO-N8
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesSK6812SIDE-A
SMD-4P,4x1.6mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 240mcd~450mcd 2mm 3.7V~5.5V 460nm~470nm 4mm 520nm~535nm 620nm~625nm 697.5mcd~1162.5mcd 800Kbit/s Built-in power-on reset circuit Translucent Frosted Lens SMD-4P,4x1.6mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)HX4055M
SOT-23-5-40℃~+85℃ 1 4.2V 40uA 4V~9V 500mA Charging IC Constant current charging、Constant voltage charging、Trickle charging、Automatic recharge、Charge termination、Programmable charging current、Soft-start、Under-voltage lockout Lithium Battery Not supported Not supported SOT-23-5 Battery Management ROHSHXBattery Management
README
README.mdRMABadge
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4, C7, C9, C15, C16, C17, C18, C19, C20, C21 |
| 8 | SK6812_Side | Bsides22:SK6812_Side | U2, U4, U5, U6, U7, U8, U9, U10 |
| 5 | SW_Push | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW2, SW3, SW4, SW5, SW6 |
| 3 | Cap Sense | Bsides22:CapSense | J11, J12, J13 |
| 3 | Conn_01x01 | cafebabe:SMD Spacer M2.5 | J6, J8, J9 |
| 2 | 20pF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 1 | 10k DNP | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 1k DNP | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 2.5k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | 5.1k | Resistor_SMD:R_Array_Convex_4x0603 | RN1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3008_1x2450 | BT2 |
| 1 | Battery_Cell | Tests:Dongguan14500 | BT1 |
| 1 | Buzzer | Bsides22:FUET-9032-Buzzer | BZ1 |
| 1 | Charger Bypass DNP | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | ESP32-S2-SOLO | Espressif:ESP32-S2-SOLO | U3 |
| 1 | G*** | kibuzzard-623F48F6 | kibuzzard-623F48F6 |
| 1 | G*** | kibuzzard-623F4981 | kibuzzard-623F4981 |
| 1 | G*** | kibuzzard-623F49DD | kibuzzard-623F49DD |
| 1 | G*** | kibuzzard-623F47EC | kibuzzard-623F47EC |
| 1 | G*** | kibuzzard-623F4E8E | kibuzzard-623F4E8E |
| 1 | HX4055M | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | LED DNP | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Left_IN | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Neopixel Expansion | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J14 |
| 1 | Program | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Right_Out | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | SW_SPDT | BreadBoardPwr:SK-3296S_switch | SW1 |
| 1 | USB_C_Plug_corrected | BadgePirates:USB_C_Receptical-Jing | P1 |
| 1 | Val** | Bsides22:BackLogo | Ref** |
| 1 | Val** | cafebabe:UELogoAbove | Ref** |
More from wrickert/RMABadge
12- 2 layers104.9 × 91.1 mm

- 2 layers73.8 × 143.7 mm

- 2 layers87.7 × 135.7 mm

- 2 layers98.7 × 84.6 mm

- 2 layers98.5 × 89.5 mm

- 2 layers90.2 × 64.4 mm

- 2 layers88.7 × 89.9 mm

- 2 layers90.2 × 45.7 mm

- 2 layers76.9 × 133.3 mm

- 2 layers42 × 110.9 mm

- 2 layers130.4 × 110.8 mm

- 2 layers42 × 42 mm

Similar boards
- 2 layers131.2 × 95.7 mm

Swadge S2-Devkit
AEFeinstein/Super-2023-Swadge-HW
Swadge devkit for an ESP32-S2 with all the bells and whistles
86 parts17MIT - 4 layers57 × 56 mm

Iot led strip pcb
0xjmux/iot_leddriver_hw
ESP32-based WS2812B LED Strip Driver PCB, designed for music visualization
85 parts9 - 4 layers48 × 55.4 mm

Minimap pcb v1
lucapoulos/minimap
See our final report for a technical overview of the demo we presented.
77 parts2 - 2 layers

- 2 layers64.9 × 63.5 mm

Motherboard
CuriousAvenger/PhantomGambit
Phantom Gambit: Where Chess Comes to Life. The Phantom Gambit is a smart chessboard that can move pieces on its own, letting you play chess hands-free.
75 parts1GPL-3.0 - 2 layers52.1 × 107.9 mm

- 2 layers

EEG ESP
ashvin-verma/BigBrainFinal
Final Project for HOPE Fall '22. Low-cost EEG with 4 inputs and filtering.
43 parts - 4 layers32.5 × 67 mm

Hw thingcell
GuilleGonzzalez/hw-thingcell
Firmware used in this device is fw-thingcell, a custom made firmware implemented using Arduino Home Assistant Arduino library (docs).
101 parts
Questions
How big is the LayoutBottom PCB?
It measures 69.9 × 136.6 mm and has 2 copper layers.
What parts does the LayoutBottom use?
59 parts, built around the ESP32-S2-SOLO-N8, SK6812SIDE-A and HX4055M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LayoutBottom KiCad files?
From the wrickert/RMABadge repository on GitHub, at the commit this page was made from: the board is Badges/BSidesIA2022/Schematics/Bottom/LayoutBottom.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LayoutBottom design in my own project?
Its repository states no licence, so its author keeps all rights: ask wrickert before reusing the design.