Skip to the content
2 layers52.1 × 107.9 mmGuitar pedal, the printed circuit board in 3D
Size
52.1 × 107.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
51
Nets
63
Pads
214
Tracks, vias
351, 61
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
18 Mar 2023
Updated
18 Apr 2023

Overview

Guitar pedal is an open-source printed circuit board by starptr, from the starptr/guitar-pedal repository on GitHub. It is a 2-layer board of 52.1 × 107.9 mm with 51 parts on 63 nets, routed with 351 tracks and 61 vias.

It is built around the ESP32-S2-SOLO-N8, PCM3002E and MIC5504-3.3YM5, with the B10K among its other parts. Its parts include 23 capacitors, 6 resistors, 6 switches, 4 ICs and 4 connectors. It belongs with the audio and music boards and the ESP32 boards of this library.

Main components

4

Parts

51
QtyValueFootprintReferences
71uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C3, C8, C9, C10, C13, C21
60.1uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC7, C11, C12, C14, C16, C24
6B10KConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalPOT1, POT2, POT3, POT4, POT5, POT6
44.7uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC18, C19, C20, C22
310uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC15, C17, C23
21MResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R5
2AudioJack2Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2, J3
2SW_Push_SPDTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalSW5, SW6
1100kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR7
1100pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC4
110kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR8
1165RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR9
11kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3
11nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC5
122uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC6
1BootConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW3
1ESP32-S2-SOLOEspressif:ESP32-S2-SOLOU3
1LED_Dual_AKAConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalD1
1LOGOLOGOG***
1MIC5504-3.3YM5Package_TO_SOT_SMD:SOT-23-5U2
1Opamp_DualRC4580IPWR:PW8U1
1PCM3002EPCM3002E:PCM3002EU4
1ResetConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalSW4
1SW_3PDTConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalSW2
1SW_SPDTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalSW1
1Test_HeadersConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ4
1USB_OTGConnector_USB:USB_Micro-B_Molex-105017-0001J1

Similar boards

  • 2 layers89.5 × 66.6 mmGuitar effect, the printed circuit board in 3D

    Guitar effect

    LikeFall123/GuitarEffectPedalDSP

    Multi effect digital guitar pedal

    64 parts
  • 2 layers131.2 × 95.7 mmSwadge S2-Devkit, the printed circuit board in 3D

    Swadge S2-Devkit

    AEFeinstein/Super-2023-Swadge-HW

    Swadge devkit for an ESP32-S2 with all the bells and whistles

    86 parts17MIT
  • 4 layers57 × 56 mmIot led strip pcb, the printed circuit board in 3D

    Iot led strip pcb

    0xjmux/iot_leddriver_hw

    ESP32-based WS2812B LED Strip Driver PCB, designed for music visualization

    85 parts9
  • 4 layers48 × 55.4 mmMinimap pcb v1, the printed circuit board in 3D

    Minimap pcb v1

    lucapoulos/minimap

    See our final report for a technical overview of the demo we presented.

    77 parts2
  • 2 layersTIME II PCB, the printed circuit board in 3D

    TIME II PCB

    ashvin-verma/TIME-II-PCB-REV-C

    116 parts1
  • 2 layers64.9 × 63.5 mmMotherboard, the printed circuit board in 3D

    Motherboard

    CuriousAvenger/PhantomGambit

    Phantom Gambit: Where Chess Comes to Life. The Phantom Gambit is a smart chessboard that can move pieces on its own, letting you play chess hands-free.

    75 parts1GPL-3.0
  • 2 layersEEG ESP, the printed circuit board in 3D

    EEG ESP

    ashvin-verma/BigBrainFinal

    Final Project for HOPE Fall '22. Low-cost EEG with 4 inputs and filtering.

    43 parts
  • 4 layers32.5 × 67 mmHw thingcell, the printed circuit board in 3D

    Hw thingcell

    GuilleGonzzalez/hw-thingcell

    Firmware used in this device is fw-thingcell, a custom made firmware implemented using Arduino Home Assistant Arduino library (docs).

    101 parts

Questions

How big is the Guitar pedal PCB?

It measures 52.1 × 107.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Guitar pedal use?

51 parts, built around the ESP32-S2-SOLO-N8, PCM3002E, MIC5504-3.3YM5 and B10K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Guitar pedal KiCad files?

From the starptr/guitar-pedal repository on GitHub, at the commit this page was made from: the board is guitar-pedal.kicad_pcb and its schematic guitar-pedal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Guitar pedal design in my own project?

Its repository states no licence, so its author keeps all rights: ask starptr before reusing the design.