2 layers73.8 × 143.7 mm
2 layers104.9 × 91.1 mm
BlueTeamCon
wrickert/RMABadge4Repo for ongoing Badge work
- Size
- 104.9 × 91.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 91
- Nets
- 77
- Pads
- 296
- Tracks, vias
- 868, 99
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210228)
- Created
- 6 May 2019
- Updated
- 29 Apr 2026
Overview
BlueTeamCon is an open-source printed circuit board by wrickert, from the wrickert/RMABadge repository on GitHub. It is a 2-layer board of 104.9 × 91.1 mm with 91 parts on 77 nets, routed with 868 tracks and 99 vias.
It is built around the HX4056, LIS3DH and TLV1117-33DCY. Its parts include 42 diodes, 15 capacitors, 5 resistors, 4 ICs and 3 connectors. It belongs with the STM32 boards of this library.
Main components
3
HX4056
ESOP-8-20℃~+85℃ 1 1A 3.9V~6V 4.2V 50uA Charging IC Constant current charging、Constant voltage charging、Trickle charging、Automatic recharge、Charge termination、Programmable charging current、Under-voltage lockout、Overcurrent Protection、Overvoltage Protection Lithium Battery Not supported ESOP-8 Battery Management ROHSHXBattery Management
LIS3DH
LGA-16(3x3)-40℃~+85℃ 1.71V~3.6V 16bit 500nA Accelerometer Motion event detection SPI、I2C X,Y,Z ±16g LGA-16(3x3) Accelerometers ROHSSTMicroelectronicsAccelerometersTLV1117-33DCY
UncategorisedTexas Instruments
README
README.mdRMABadge
Parts
91| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +22 |
| 7 | buzzardLabel | , , , , , , | |
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric | C7, C8, C13, C14, C15 |
| 5 | LOGO | LOGO | G***, G***, G***, G***, G*** |
| 4 | LED | Dragos:T776-ReverseMountLED | D39, D40, D41, D42 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C6, C9, C10 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3, C11, C12 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 1k | Resistor_SMD:R_Array_Convex_4x0603 | RN1, RN4 |
| 2 | 330 | Resistor_SMD:R_Array_Convex_4x0603 | RN2, RN3 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | 0 Ohm | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 1.5 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 5.1k | Resistor_SMD:R_Array_Convex_4x0603 | RN5 |
| 1 | Battery_Cell | Tests:Dongguan14500 | BT1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | HX4056 | Package_SO:HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm | U3 |
| 1 | LIS3DH | Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U2 |
| 1 | Prog | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | STM32F072CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW3 | BreadBoardPwr:SK-3296S_switch | Power1 |
| 1 | SW_DIP_x01 | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW1 |
| 1 | TLV1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | USB_C_Receptacle | Tests:USB_C_Receptical-Jing | J1 |
| 1 | Val** | NFCBuisness:W | Ref** |
The 90 most common of 91 parts.
More from wrickert/RMABadge
12- 2 layers87.7 × 135.7 mm
- 2 layers98.7 × 84.6 mm
- 2 layers69.9 × 136.6 mm
- 2 layers98.5 × 89.5 mm
- 2 layers90.2 × 64.4 mm
- 2 layers88.7 × 89.9 mm
- 2 layers90.2 × 45.7 mm
- 2 layers76.9 × 133.3 mm
- 2 layers42 × 110.9 mm
- 2 layers130.4 × 110.8 mm
- 2 layers42 × 42 mm
Similar boards
- 2 layers99.6 × 99 mm
.kicad_pcb.jpg?size=s&soon)
- 2 layers124 × 112 mm
- 2 layers393.5 × 153.7 mm
- 2 layers105 × 33 mm
- 2 layers155 × 80 mm
- 4 layers18 × 51 mm
- 4 layers100 × 50 mm
- 2 layers43.3 × 37.6 mm
ZBSmartMeter
Tropaion/ZigBee_SmartMeter_Reader
This is a ZigBee device to collect data from smartmeters using the DLMS/COSEM protocol.
37 parts32GPL-3.0
Questions
How big is the BlueTeamCon PCB?
It measures 104.9 × 91.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BlueTeamCon use?
91 parts, built around the HX4056, LIS3DH and TLV1117-33DCY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BlueTeamCon KiCad files?
From the wrickert/RMABadge repository on GitHub, at the commit this page was made from: the board is Badges/BlueTeamCon/Schematics/V1/V1/BlueTeamCon.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BlueTeamCon design in my own project?
Its repository states no licence, so its author keeps all rights: ask wrickert before reusing the design.