Skip to the content

Boards using the IA0505S

4 boards

Boards in 4 GitHub repositories, designed in KiCad, that use the IA0505S by XP Power (-40°C ~ 85°C -5V 0.76" Length x 0.24" Width x 0.40" Height (19.3mm x 6.1mm x 10.2mm) 1 W 1 kV 100mA 2 4.5V 5-SIP Module 5.5V 5V 62368-1 74% ITE (Commercial) Isolation module Through hole SIP-5 Power Module/Power Supply ROHS). See how each wires it, with its parts, size, README and files; the IA0505S’s symbol, footprint and pinout are on its own page.

  • 2 layers99.9 × 70.5 mmMoglabs remote locking board, the printed circuit board in 3D

    Moglabs remote locking board

    atomlaser-lab/esp32-laser-oscilloscope

    Remote laser monitoring and locking control via the MOGLabs Diode Laser Controller.

    41 parts1GPL-3.0
  • 2 layers50 × 85 mmUsb headphone amp, the printed circuit board in 3D

    Usb headphone amp

    embediver/usb-headphone-amp

    USB Headphone Amplifier based on RP2040, PCM5102A and NE5532.

    144 parts
  • 2 layers175 × 60 mmUsb rs485 switch, the printed circuit board in 3D

    Usb rs485 switch

    ucw-gadgets/usb-rs485_switch

    8x RS-485 switch and USB convertor

    357 parts
  • 4 layers250 × 140 mmThermocouple 8ch, the printed circuit board in 3D

    Thermocouple 8ch

    mahmoud-elghamry/thermocouple

    This directory is a self-contained KiCad 10 project. It does not share files with, and must not be confused with, the single-channel board in hardware/single-channel/.

    209 parts1