4 layers70 × 110 mm
Boards using the TMUX1208PW
5 boardsBoards in 4 GitHub repositories, designed in KiCad, that use the TMUX1208PW by Texas Instruments (-40℃~+125℃ 1 1.08V~5.5V 5Ω 65MHz 85pF 8:1 Bidirectional analog channel、Fault protection、Fail-safe disconnect TSSOP-16 Analog Switches, Multiplexers ROHS). See how each wires it, with its parts, size, README and files; the TMUX1208PW’s symbol, footprint and pinout are on its own page.
- 4 layers150 × 90 mm
Motherboard
Foosa7/koi_8x8
The controller board for Koi 8×8. Carries a Raspberry Pi Pico (RP2040) and hosts up to 8 daughterboards in PCIe-x4 card-edge slots, addressing each board's DAC/ADC over a shared SPI bus. Formerly codenamed MOBO.
56 parts2 - 4 layers150 × 90 mm
Motherboard bak
Foosa7/koi_8x8
The controller board for Koi 8×8. Carries a Raspberry Pi Pico (RP2040) and hosts up to 8 daughterboards in PCIe-x4 card-edge slots, addressing each board's DAC/ADC over a shared SPI bus. Formerly codenamed MOBO.
28 parts2 - 4 layers22.9 × 51.3 mm
RT - Control Unit
poojanth/ForschungsProjekt
This project focused on the design and optimization of a printed circuit board (PCB) for an implantable optical sensor system intended for biomedical research.
50 parts - 2 layers22.9 × 17.6 mm
SOC Final
Samuel20040521/flico
flico 是一台以 Raspberry Pi Pico 為核心、用來量測螢幕 / 光源閃爍(flicker)的小型自製 儀器。光訊號由 Vishay BPW34 矽 PIN 光二極體接收,經 Microchip MCP6004 跨阻 放大器(TIA)轉成電壓,由 Pico 的 ADC 取樣後,透過 USB-CDC 串列傳回桌面端的 Rust GUI(eframe + egui)即時繪出時域波形與 FFT 頻譜。
23 parts