Skip to the content

Boards using the SN74LVC1G14DRL

14 boards

Boards in 10 GitHub repositories, designed in KiCad, that use the SN74LVC1G14DRL by Texas Instruments (Single Schmitt-Trigger Inverter). See how each wires it, with its parts, size, README and files; the SN74LVC1G14DRL’s symbol, footprint and pinout are on its own page.

  • 4 layers39 × 39 mmGlobalEye, the printed circuit board in 3D

    GlobalEye

    will127534/GlobalEye

    A simple camera board using GMAX3412 1" 4K@30fps global shutter sensor

    148 parts31MIT
  • 2 layers99.1 × 86.4 mmHD6301V1 thing, the printed circuit board in 3D

    HD6301V1 thing

    lgugelmann/HD6301_thing

    I recently received a few samples of a Hitachi HD6301V1 in a DIP-40 package. It's a 1MHz 8bit CPU derived from the Motorola 6801 with a few extra instructions.

    60 parts3MIT
  • 4 layers35 × 18 mmRingOne, the printed circuit board in 3D

    RingOne

    TheColonelYoung/RingOne

    3D air mouse based on STM32 - Can be used for controlling CADs and every other manipulation in 3D space. Is based around STM32L452, IMU LSM6DSL (gyroscope and accelerometer) and Bluetooth low power module RN4871.

    85 parts3
  • 2 layers95.4 × 100.6 mmPanel, the printed circuit board in 3D

    Panel

    tubist2004/ESP32_D-Bus_Adapter

    This is a repository for building a (or more) ESP32 based D-Bus Adapter for BSH appliances.

    1,712 parts3
  • 2 layers143 × 118 mmMultiplexer cell tester, the printed circuit board in 3D

    Multiplexer cell tester

    Big-Red-Sat/Perovskite-Curve-Tracer

    This repository contains the source hardware and software files for a passive, solar cell, curve tracer.

    111 parts2
  • 4 layers76.9 × 67.3 mmTerra HW, the printed circuit board in 3D

    Terra HW

    jamesmendel/terra-nova

    Terra 2.0 Firmware and Hardware

    95 parts2GPL-3.0
  • 4 layers50.2 × 23.6 mmSdrewire, the printed circuit board in 3D

    Sdrewire

    agners/sdrewire

    SDReWire micro SD inline reader

    99 parts
  • 4 layers120 × 75 mmCuttlefish, the printed circuit board in 3D

    Cuttlefish

    AllenNeuralDynamics/harp.device.cuttlefish

    0414: an octal, TTL input/output device with programmable square wave output.

    195 parts
  • 4 layers76 × 75.1 mmKobold, the printed circuit board in 3D

    Kobold

    tzarc/keyboards

    @tzarc's custom keyboard designs.

    104 parts993CERN-OHL-S-2.0
  • 4 layers87 × 75 mmFlight computer, the printed circuit board in 3D

    Flight computer

    Big-Red-Sat/Big-Red-Sat-1

    This repository contains the designs for the Big Red Sat-1, a 1U CubeSat examining the performance of perovskite solar cells in low earth orbit.

    154 parts6
  • 2 layers58.1 × 61.8 mmSwitcher, the printed circuit board in 3D

    Switcher

    Big-Red-Sat/Big-Red-Sat-1

    This repository contains the designs for the Big Red Sat-1, a 1U CubeSat examining the performance of perovskite solar cells in low earth orbit.

    67 parts6
  • 2 layers69.7 × 61.8 mmSwitcher, the printed circuit board in 3D

    Switcher

    Big-Red-Sat/Big-Red-Sat-1

    This repository contains the designs for the Big Red Sat-1, a 1U CubeSat examining the performance of perovskite solar cells in low earth orbit.

    79 parts6
  • 2 layers8.5 × 12.7 mmMinipcb, the printed circuit board in 3D

    Minipcb

    tubist2004/ESP32_D-Bus_Adapter

    This is a repository for building a (or more) ESP32 based D-Bus Adapter for BSH appliances.

    30 parts3
  • 2 layers62.6 × 100.6 mmPanel 0, the printed circuit board in 3D

    Panel 0

    tubist2004/ESP32_D-Bus_Adapter

    This is a repository for building a (or more) ESP32 based D-Bus Adapter for BSH appliances.

    1,116 parts3