Skip to the content

Boards using the INA238AIDGSR

10 boards

Boards in 7 GitHub repositories, designed in KiCad, that use the INA238AIDGSR by Texas Instruments (-300mV~85V -40℃~+125℃ 0.02uV/℃ 1.5uV 10mA 160dB 2.5nA 2.7V~5.5V 640uA High-side detection、Low-side detection、Bidirectional detection、Input filter、Power monitoring、Digital output interface、Programmable threshold alarm、Integrated ADC、Enable/shutdown function ±163.84mV VSSOP-10-0.5mm Current Sense Amplifiers ROHS). See how each wires it, with its parts, size, README and files; the INA238AIDGSR’s symbol, footprint and pinout are on its own page.

  • 4 layers75.9 × 105.9 mmHydroBall, the printed circuit board in 3D

    HydroBall

    CIDCO-dev/Poseidon

    Hydrographic surveying platform operating system

    65 parts11MIT
  • 4 layers33.5 × 24 mmUSBPowerMeter, the printed circuit board in 3D

    USBPowerMeter

    JunKimmmy/USBPowerMeter

    A compact USB-C passthrough power meter that displays real-time voltage, current, and power on an integrated 128×64 OLED screen.

    84 parts8
  • 4 layers55 × 52 mmKali tank sensor v3, the printed circuit board in 3D

    Kali tank sensor v3

    eburi/wireless-tank-sensor

    ESPHome/BTHome based wireless tank sensor.

    22 partsMIT
  • 6 layers78 × 89.5 mmAtx-24pin rev3, the printed circuit board in 3D

    Atx-24pin rev3

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    129 partsApache-2.0
  • 2 layers165 × 64 mmRoute, the printed circuit board in 3D

    Route

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    101 parts3MIT
  • 2 layers160 × 60 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    6 parts2
  • 4 layers110 × 80 mmSpin rig controller, the printed circuit board in 3D

    Spin rig controller

    Tinkerbug-Robotics/TinkerRocket

    Model rocket flight computer, ground station, iOS app, and simulation

    170 parts1GPL-3.0
  • 4 layers24pin module, the printed circuit board in 3D

    24pin module

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    69 partsApache-2.0
  • 6 layers88 × 40 mmEps-8pin rev3, the printed circuit board in 3D

    Eps-8pin rev3

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    68 partsApache-2.0
  • 4 layers78 × 28.3 mmEps8pin module, the printed circuit board in 3D

    Eps8pin module

    nathanfraske/CEC-Platform

    ONE board file, kept current by the wave (owner directive 2026-07-25: "the current best should be placed into a candidate folder per board and kept current with only one board ideally so we have a reference").

    58 partsApache-2.0