Skip to the content

Boards using the SUD50P06-15

5 boards

Boards in 4 GitHub repositories, designed in KiCad, that use the SUD50P06-15 by TECH PUBLIC. See how each wires it, with its parts, size, README and files; the SUD50P06-15’s symbol, footprint and pinout are on its own page.

  • 4 layers56.5 × 45 mmPower board, the printed circuit board in 3D

    Power board

    alex-dnd/power_board

    Универсальная четырёхслойная плата питания от 6S на LMR33630: выходы 5 В и 7 В до 3 А. KiCad 10.

    51 parts
  • 4 layers68.6 × 53.3 mmDc shield, the printed circuit board in 3D

    Dc shield

    eurovibes/dc_shield

    IFX9201 based Arduino Uno R3 motor shield

    53 parts
  • 4 layers94 × 78 mmUfluidics, the printed circuit board in 3D

    Ufluidics

    pyshrekek/ufluidics

    Firmware for an Elegoo Mega 2560 R3 driving five NEMA17 syringe pumps on a microfluidic device.

    86 parts
  • 4 layers65 × 56 mmCanary hat, the printed circuit board in 3D

    Canary hat

    danbrunski/canary

    Four 25 F cells in series for CANary-PWR's LTC3350 hold-up, on a lead (design record: docs/CANary-PWR-Spec.md §P4). The board has no active parts: four cells, an NTC, two Kelvin net ties and a Micro-Fit 2 × 5 header.

    66 parts
  • 4 layers87 × 56 mmCanary hat, the printed circuit board in 3D

    Canary hat

    danbrunski/canary

    Four 25 F cells in series for CANary-PWR's LTC3350 hold-up, on a lead (design record: docs/CANary-PWR-Spec.md §P4). The board has no active parts: four cells, an NTC, two Kelvin net ties and a Micro-Fit 2 × 5 header.

    104 parts