4 layers80 × 80 mm
Boards using the RT314A05
16 boardsBoards in 16 GitHub repositories, designed in KiCad, that use the RT314A05 by TE Connectivity (-40℃~+85℃ 10ms 10ms 16A 400V@AC 5V AgNi One set changeover: 1C (SPDT - changeover) Single Coil 插件 Magnetic Latching Relays ROHS). See how each wires it, with its parts, size, README and files; the RT314A05’s symbol, footprint and pinout are on its own page.
- 4 layers95 × 75 mm
Pico IoT thingy
mhered/KiCAD_udemy_course
My notes on the course "PCB design with KiCAD - updated for KiCAD 9" by Dr Peter Dalmaris in Udemy
61 parts2 - 2 layers100 × 82 mm
TXRX Relay Board
SP6GK/TXRX_Relay_Board
A PCB for switching the signal path between RX and TX in a high-power HF amplifier, such as the Forte 600. It includes RX/TX relays, an input SWR bridge, and analog input over power protection.
80 parts2GPL-3.0 - 4 layers80 × 80 mm
PICO iot
Ayan-nova/Design-of-a-Raspberry-PICO-Iot-Device-on-4-Layer-PCB-Design-With-Sensor-And-More
Design a Raspberry Pi Pico W-based Industrial IoT Gateway and Edge Controller using Kicad software.
60 parts1 - 4 layers92 × 88 mm
IOT
Habib-creater/ESP32-IoT-Monitoring-Control-Board
4-layer ESP32-based IoT monitoring and control board with environmental sensing, relay control, USB-C, and Qwiic expansion.
63 parts1 - 4 layers100 × 100 mm
- 4 layers100 × 80 mm
ESP32
Tanmayeers/Projects
Specifications: 1. Operting Voltage: 9V 2. Operating Current: 200mA 3. Output Voltage Swing: 6.5V 4. 3dB - Bandwidth: 100 ± 10 Hz 5. Noise: 5.406mVrms
63 parts1 - 4 layers80 × 80 mm
Design of a Raspberry PICO IoT device on 4-layer pcb with sensors
Itachi-infinito/Raspberry-Pico-IoT-4-Layer-PCB
Raspberry Pi Pico IoT device on 4-layer PCB with sensors, KiCad schematics, PCB layout and 3D visualization.
61 parts - 4 layers80 × 80 mm
ESP32-Custom Development Board PCB Design
jayatharshan12-design/ESP32-Custom-Development-Board-PCB-Design
63 parts - 2 layers
Central
mohamed1920said/Greenhouse_edge_AI
This repository is an experimental greenhouse monitoring and control project built around an ESP32-class controller.
13 parts - 4 layers104 × 104 mm
HomeAutomation pi
PragyanSenDeka/RaspberryPiPicoBasedHomeAutomationPCB
Home automation node based on Raspberry Pi Pico W with WiFi and RS485/MODBUS. Features DIP-switch addressing, SHT31 temperature/humidity sensor, QWIIC I2C, RGB LED, buttons, SPI expansion, and a 230V 16A relay.
58 parts - 4 layers82.5 × 78.7 mm
ESP WROOM 32D
Pyisoe-Thame/ESP_WROOM_32D
This repository contains files and designs created while following a YouTube tutorial on KiCad. The ESP-WROOM-32D is the same chip used in NodeMCU-32S development board.
64 parts - 2 layers60 × 50 mm
Relais M
REcassy/Relais-M
This repo contains the schematics (KiCad + symbols/footprints), pcb (gerber + drill) files necessary to build a clone Relais M adapter for the Cassy Mobile as described here…
13 parts - 4 layers104.1 × 61 mm
Bigtest
YusufAlghoneimy/ESP32-PCB-Design
Youtube PCB reference: made by morten (https://www.youtube.com/watch?v=b-7bMl6fJio&t=8320s)
59 parts - 2 layers42.6 × 42.6 mm
Zeus power switch
anobli/pandora-hw
Open hardware designs for user-controlled smart home devices. Zephyr RTOS + Thread/WiFi connectivity. No cloud dependency, no vendor lock-in.
19 parts3CERN-OHL-S-2.0 - 4 layers85 × 65 mm
