
Boards using the 1N4007FL
17 boardsBoards in 15 GitHub repositories, designed in KiCad, that use the 1N4007FL by SMC (-65℃~+150℃ 1.1V@1A 1A 1kV 30A 5uA@1kV Independent SOD-123FL Diodes - General Purpose ROHS). See how each wires it, with its parts, size, README and files; the 1N4007FL’s symbol, footprint and pinout are on its own page.
- 2 layers76.2 × 114.3 mm

- 4 layers80 × 100 mm

Harp treadmill
AllenNeuralDynamics/harp.device.treadmill-driver
0326: a Harp-compatible device for controlling an instrumented mouse treadmill
173 parts4 - 2 layers50.1 × 88.2 mm

PtFlex
custom-ds/ptFlex
ptFlex tracker board starting with version 2.0 of the hardware, which is based on the improvements found in the ptSolar tracker.
76 parts3GPL-3.0 - 2 layers143.2 × 85.8 mm

- 4 layers71.1 × 149.9 mm

- 2 layers130 × 105 mm

- 4 layers70 × 168 mm

Valve controller
AllenNeuralDynamics/harp.device.valve-controller
0368: a 16-channel valve controller
224 parts - 4 layers31.7 × 110 mm

Tiliqua motherboard
antoinevg/tiliqua
A powerful, hackable FPGA-based audio multitool for Eurorack.
134 partsCERN-OHL-S-2.0 - 4 layers90 × 90 mm

Pump Controller
citrineio/Pump-Controller-V2
Second Version of the pump controller PCB
68 partsApache-2.0 - 2 layers30 × 52 mm

Raspi ir
custom-ds/Universal-Remote-LIRC
Build a universal remote control using a Raspberry Pi with the LIRC library
32 partsGPL-3.0 - 2 layers62 × 83 mm

Vehicle Power Switch
custom-ds/Vehicle-Auto-On
With the Arduion programmer board loaded with the jtag2updi software, and the Pin 6 from the Arduino connected to the Reset line on the ATTiny404, you can Build and Program directly inside of the Visual Studio Code.
49 partsGPL-3.0 - 4 layers40 × 110 mm

Eurorack pmod pcb
apfaudio/eurorack-pmod
A eurorack-friendly audio frontend compatible with many FPGA boards, based on the AK4619VN audio CODEC.
104 parts241 - 4 layers35 × 110 mm

Eurorack pmod pcb
apfaudio/eurorack-pmod
A eurorack-friendly audio frontend compatible with many FPGA boards, based on the AK4619VN audio CODEC.
125 parts241 - 4 layers31.7 × 110 mm

Eurorack pmod pcb
apfaudio/eurorack-pmod
A eurorack-friendly audio frontend compatible with many FPGA boards, based on the AK4619VN audio CODEC.
126 parts241 - 2 layers61.3 × 39.3 mm

- 2 layers61.3 × 39.3 mm

- 2 layers24.5 × 73.5 mm

PtSolar Breakout
custom-ds/ptSolar
Under the hood, the ptSolar runs on the same Microchip ATMega328p microcontroller that the other trackers have been using for years, although this board runs at a lower 3.3 volt level, and a slower 8MHz clock speed.
18 partsGPL-3.0