Skip to the content

Boards using the BC847BDW1

23 boards

Boards in 20 GitHub repositories, designed in KiCad, that use the BC847BDW1 by onsemi (-55℃~+150℃ 100MHz 100mA 150 2 NPN 250mV 380mW 45V 5uA 6V NPN SOT-363 Bipolar (BJT) ROHS). See how each wires it, with its parts, size, README and files; the BC847BDW1’s symbol, footprint and pinout are on its own page.

  • 2 layers38.1 × 38.1 mmSIM868, the printed circuit board in 3D

    SIM868

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    73 parts56Apache-2.0
  • 4 layers156.5 × 85.4 mmP2 Kevinbot Board, the printed circuit board in 3D

    P2 Kevinbot Board

    meowmeowahr/KevinbotV3-KiCAD

    Kevinbot Core - Parallax Propeller 2 Robot Controller

    166 parts7CERN-OHL-S-2.0
  • 2 layers55.6 × 57.2 mmYkb skadi pcb, the printed circuit board in 3D

    Ykb skadi pcb

    YarmanKB/ykb-skadi-pcb

    KiCad project for YKB Skadi boards

    74 parts7Apache-2.0
  • 6 layers17 × 10.9 mmD16, the printed circuit board in 3D

    D16

    git4dcc/RTB_D16

    DCC / Railcom decoder (NEM651, single sided)

    43 parts2Apache-2.0
  • 4 layers90.3 × 26.6 mmC12, the printed circuit board in 3D

    C12

    git4dcc/RTB_C12

    DCC Railcom booster

    95 parts1Apache-2.0
  • 6 layers14 × 8 mmD20, the printed circuit board in 3D

    D20

    git4dcc/RTB_D20

    DCC / Railcom decoder (NEM651, double sided)

    51 parts1Apache-2.0
  • 6 layers15.2 × 9.5 mmD21, the printed circuit board in 3D

    D21

    git4dcc/RTB_D21

    DCC / Railcom decoder (Next18, double sided)

    48 parts1Apache-2.0
  • 6 layers15.3 × 11.4 mmD22, the printed circuit board in 3D

    D22

    git4dcc/RTB_D22

    DCC / Railcom decoder (Plux16, double sided)

    48 parts1Apache-2.0
  • 6 layers153.3 × 53 mmSCAN, the printed circuit board in 3D

    SCAN

    jjsprandel/SCAN_PCB

    Welcome to the SCAN repository! Below, you will find all the necessary information, from hardware design to software documentation.

    186 parts1
  • 4 layers101.6 × 97.2 mmHeartToHeart, the printed circuit board in 3D

    HeartToHeart

    AlexanderRoller/heartToHeart

    HeartToHeart is a hardware project designed for IoT prototyping, featuring a custom PCB and ESP32 microcontroller.

    61 parts
  • 2 layers101.4 × 28 mmSateLight Main, the printed circuit board in 3D

    SateLight Main

    ChrisMeletis/satelight_pcb

    A repository containing all the printed circuit boards for the SateLight project.

    38 partsGPL-2.0
  • 4 layers50.9 × 15.5 mmD12, the printed circuit board in 3D

    D12

    git4dcc/RTB_D12

    DCC Railcom Decoder FLM V100

    72 partsApache-2.0
  • 4 layers160.8 × 12 mmD13, the printed circuit board in 3D

    D13

    git4dcc/RTB_D13

    DCC/RailCom Function Decoder for Minitrix Passenger Cars

    153 partsApache-2.0
  • 4 layers76 × 11 mmD15, the printed circuit board in 3D

    D15

    git4dcc/RTB_D15

    Minitrix V160 N-Scale Locomotive Decoder (DCC/RailCom)

    83 partsApache-2.0
  • 6 layers17 × 10.9 mmD24, the printed circuit board in 3D

    D24

    git4dcc/RTB_D24

    DCC / Railcom decoder (NEM651, single sided), WS28xx

    53 partsApache-2.0
  • 2 layers188.7 × 147.5 mmTemp sensor panel, the printed circuit board in 3D

    Temp sensor panel

    juniper-garden/twig_temp_humidity_sensor

    Hardware files for the temperature and humidity sensor

    961 partsGPL-3.0
  • 4 layers102.7 × 102.7 mmMy drone, the printed circuit board in 3D

    My drone

    Motasim-1/Wifi-quadcopter-pcb

    Custom PCB design for a WiFi-controlled quadcopter based on the ESP32 microcontroller. The board was designed in KiCad, assembled using solder paste and a reflow oven, and tested with four motor outputs controlled…

    67 parts
  • 2 layers141 × 40 mmModel-108, the printed circuit board in 3D

    Model-108

    vd-rd/prod-pdu

    105 parts
  • 2 layers100 × 70 mmSCAN mainboard, the printed circuit board in 3D

    SCAN mainboard

    jjsprandel/SCAN_PCB

    Welcome to the SCAN repository! Below, you will find all the necessary information, from hardware design to software documentation.

    58 parts1
  • 2 layers100.4 × 114.2 mmDEitW, the printed circuit board in 3D

    DEitW

    velvia-fifty/AudioThings

    DIY audio-related projects of questionable quality and dubious utility; delivered in 30 minutes or less or the next one is free

    109 parts1
  • 2 layers48.2 × 24.9 mmTemp sensor, the printed circuit board in 3D

    Temp sensor

    juniper-garden/twig_temp_humidity_sensor

    Hardware files for the temperature and humidity sensor

    56 partsGPL-3.0
  • 2 layers145.2 × 114.8 mmTemp sensor panel v2, the printed circuit board in 3D

    Temp sensor panel v2

    juniper-garden/twig_temp_humidity_sensor

    Hardware files for the temperature and humidity sensor

    268 partsGPL-3.0