4 layers188 × 90.2 mm
Boards using the PCF8574ATS/3
10 boardsBoards in 9 GitHub repositories, designed in KiCad, that use the PCF8574ATS/3 by NXP Semiconductors (-40℃~+85℃ 100kHz 2.5V~6V 2.5uA 25mA 300uA 8 8 I2C Interrupt Output Reset function、Cascading and address extension、Built-in LED driver LSSOP-20-175mil I/O Expanders ROHS). See how each wires it, with its parts, size, README and files; the PCF8574ATS/3’s symbol, footprint and pinout are on its own page.
- 2 layers74.1 × 52 mm
Industrial mcp23017 input device v02
Pekaway/I2C-GPIO-extension
I2C Extension for the VAN PI CORE
74 parts1 - 2 layers
- 4 layers
Elec Donut
pollen-robotics/elec_Donut
Donut is electronic boarrd dedicated to the positionning and the initialization of Orbita 3d for Reachy 2
94 partsApache-2.0 - 2 layers20.3 × 63 mm
BodyControllerForSX70z
ZeshuLiu/SX70z
SX-70 电子化机身主控 | Electronic Polaroid SX-70 Controller 基于 ESP32 的宝丽来 SX-70 相机控制模块，替换原装机头控制器。 支持自动测光曝光、B/T/手动模式、闪光灯同步、BLE+WiFi配网、OTA升级。 配备 128×32 OLED 机身控制器显示 EV 和快门速度，3D 按键交互。 Firmware: GPLv3 Hardware: CERN-OHL-S 2.0
22 parts10 - 2 layers24 × 85.2 mm
Controller body
ZeshuLiu/SX-70-Mk2
把板子上的U+ U- GND VCC焊到usb线上，连接电脑后可以当作树莓派Pico开发板进行操作，上传代码的参见这里（树莓派官网）。 \ 在将机身主控安装至机器内部之前需要将micropython固件及代码烧录至控制器中。后续可以通过机身控制器上的USB接口连接开发板并更新python代码。 将code根目录中的所有python文件上传至控制器（文件夹不需要），并且将gmain.py命名为…
31 parts2GPL-3.0 - 4 layers75 × 65 mm
CRImier MyKiCad vaio re
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
289 parts1 - 2 layers123 × 69 mm
ProyekOPSI2023
zeankundev/boards
A collection and an archive of KiCad projects I made. Contains projects from 2023 - 2024.
23 parts1 - 2 layers123 × 71 mm
ProyekOPSI2023-Alternate
zeankundev/boards
A collection and an archive of KiCad projects I made. Contains projects from 2023 - 2024.
12 parts1 - 2 layers102.4 × 102.4 mm
