Skip to the content
2 layers94.7 × 71.8 mmDevice Board, the printed circuit board in 3D

A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

Size
94.7 × 71.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
104
Nets
105
Pads
399
Tracks, vias
787, 73
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
14 Jun 2026
Updated
2 Nov 2026

Overview

Device Board is an open-source printed circuit board by WestianPKl, from the WestianPKl/pcb-docs repository on GitHub. It is a 2-layer board of 94.7 × 71.8 mm with 104 parts on 105 nets, routed with 787 tracks and 73 vias.

It is built around the SN65HVD230DR, MX25L25673GM2I-08G and FM24CL16B-GTR, with the M24C32-WMN6TP, MCP7940N-I/SN and PCA9306DCUR among its other parts. Its parts include 37 resistors, 19 capacitors, 17 connectors, 10 ICs and 6 diodes.

Main components

10

README

README.md

PCB Manager — Board Collection

A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI, or UART.

Author: Piotr Kłyś
Tool: KiCAD 8.x
Firmware: MicroPython (Pico boards), AVR-GCC (ATmega boards)


Boards Overview

BoardVersionInterfaceIC / Description
Main_Board1.0 / 1.1 / 1.2a—Raspberry Pi Pico test & integration board
CAN_Board1.0SPIMCP2515 — CAN bus controller
EEPROM_Board1.0I2CM24C32 — 32 Kbit EEPROM
GPIO_Board1.0I2CMCP23017 — 16-bit GPIO expander
INA_Board1.0I2CINA226 — voltage / current / power monitor
RTC_Board1.0I2CPCF8563T — real-time clock
Relay_Board1.0GPIO2-channel relay module
Modbus_Board1.0UARTRS-485 / Modbus RTU
Power_Board1.0—DC power supply module
MOSFET_Board1.0GPIOHigh-side / low-side MOSFET switch
Amplifier_Board—AnalogSignal amplifier
ATMega_Board1.0—ATmega (through-hole) development board
ATMegaSMD_Board1.0—ATmega (SMD) development board
Tree_Board——AVR LED Christmas tree
IoT_Logger_B_1.01.0—IoT data logger revision B
IoT_Logger_C_1.01.0—IoT data logger revision C
Pico_TH_Logger_SMD_PCF8563T_2.12.1I2CPico temp/humidity logger with RTC
Pico_TH_Logger_Relay_SMD_PCF8563T_2.12.1I2CPico temp/humidity logger with RTC + relay

Board Details

Main_Board

The central development and integration board built around the Raspberry Pi Pico. Used to test all peripheral modules in the collection.

Features:

  • RGB LED (PWM)
  • 2× status LEDs (PWM)
  • Buzzer (PWM)
  • 2× push buttons
  • ADC input with 100 kΩ / 200 kΩ voltage divider
  • Connectors for all expansion boards (I2C, SPI, CAN, EEPROM, GPIO, INA, RTC, Relay)
  • Optional multi-threaded test runner (_thread)

Firmware: Main_Board/Code/main.py


CAN_Board

CAN bus communication module using the MCP2515 controller over SPI.

Features:

  • SPI interface to Pico
  • Standard CAN 2.0 frame support
  • Loopback, sniffer, and master/slave test scripts

Firmware: CAN_Board/Code/

  • can_mcp2515.py — low-level MCP2515 driver
  • can_communication.py — higher-level protocol
  • hello.py, loopback.py, sniffer.py, can_slave.py, can_test.py — examples

EEPROM_Board

Non-volatile storage expansion using the M24C32 (32 Kbit / 4 KB) I2C EEPROM.

Firmware: EEPROM_Board/Code/eeprom_m24c32.py


GPIO_Board

16-bit I2C GPIO expander using the MCP23017, providing two 8-bit ports (Port A / Port B) with interrupt support.

Firmware: GPIO_Board/Code/expander_mpc23017.py


INA_Board

High-side power monitoring using the INA226 — measures bus voltage, shunt voltage, current, and power via I2C.

Default configuration:

  • Shunt resistor: 100 mΩ
  • Max current: 3.2 A
  • Alert pin supported

Firmware: INA_Board/Code/measurement_ina226.py


RTC_Board

Real-time clock module using the PCF8563T via I2C. Provides timekeeping, alarm, and 1 Hz clock output.

Features:

  • Date / time read and write
  • Alarm support
  • 1 Hz CLKOUT output
  • Battery backup pin

Firmware: RTC_Board/Code/rtc_pcf8563.py


Relay_Board

2-channel relay board controlled via GPIO from the Pico.


Modbus_Board

RS-485 transceiver board enabling Modbus RTU communication over UART.


Power_Board

DC power supply module — voltage regulation and distribution for the board ecosystem.


MOSFET_Board

MOSFET-based switching board for controlling higher-power loads from Pico GPIO.


Amplifier_Board

Analog signal amplifier module.


ATMega_Board

Through-hole ATmega development board — classic DIP package, ISP programming header.


ATMegaSMD_Board

SMD variant of the ATmega development board — compact form factor.


Tree_Board

AVR-based LED Christmas tree — decorative board with animated LED patterns.

Firmware: Tree_Board/TreeCode/main.c (AVR-GCC)
Gerbers / renders: Tree_Board/PROD/


IoT_Logger_B

IoT data logger — revision B.


IoT_Logger_C

IoT data logger — revision C. Improved layout over revision B.


Pico_TH_Logger_SMD_PCF8563T_2.1

Compact SMD temperature and humidity logger based on Raspberry Pi Pico with a PCF8563T RTC for timestamped logging.


Pico_TH_Logger_Relay_SMD_PCF8563T_2.1

Extended version of the TH Logger adding a relay output for threshold-based control (e.g. ventilation, heating).


Repository Structure

text
pcb-docs/
├── <BoardName>/
│   ├── <BoardName>.kicad_pro      # KiCAD project
│   ├── <BoardName>.kicad_sch      # Schematic
│   ├── <BoardName>.kicad_pcb      # PCB layout
│   ├── Code/                      # MicroPython / C firmware
│   └── PROD/                      # Gerbers, renders, BOM exports
├── Boards_BOM.ods                 # Combined Bill of Materials
└── README.md

Each board may contain multiple revision subdirectories (e.g. 1.0/, 1.1/).


Getting Started

Requirements

  • KiCAD 8.x — to open schematics and PCB layouts
  • Thonny or mpremote — to flash MicroPython firmware to Pico
  • AVR-GCC + avrdude — for Tree_Board / ATmega boards

Running firmware on Pico

  1. Flash MicroPython to your Raspberry Pi Pico.
  2. Copy the relevant driver file(s) from <BoardName>/Code/ to the Pico filesystem.
  3. Run or import the module from the REPL or main.py.
python
# Example — INA226 power monitor
from machine import I2C, Pin
from measurement_ina226 import MEASUREMENT_INA226

i2c = I2C(0, sda=Pin(4), scl=Pin(5))
ina = MEASUREMENT_INA226(i2c, r_shunt_ohm=0.1, max_current=3.2)
print(ina.read_voltage(), ina.read_current(), ina.read_power())

Bill of Materials

A combined BOM for all boards is available in Boards_BOM.ods (OpenDocument Spreadsheet).


License

This project is licensed under the CERN Open Hardware Licence v2 - Permissive (CERN-OHL-P).

You are free to use, modify, and manufacture these designs. Attribution appreciated.

Parts

104
QtyValueFootprintReferences
14100nFCapacitor_SMD:C_0603_1608MetricC1, C3, C4, C5, C6, C7, C10, C11, C12, C13, C15, C17, C18, C19
144k7RResistor_SMD:R_0603_1608MetricR3, R4, R5, R6, R7, R8, R10, R11, R12, R13, R19, R20, R21, R22
1147kRResistor_SMD:R_0603_1608MetricR15, R16, R17, R18, R23, R24, R25, R26, R27, R28, R29
8Jumper_2_BridgedConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8
410kRResistor_SMD:R_0603_1608MetricR1, R2, R9, R14
31kRResistor_SMD:R_0603_1608MetricR32, R36, R37
3220RResistor_SMD:R_0603_1608MetricR33, R34, R35
3LEDLED_SMD:LED_0603_1608MetricD1, D4, D5
2+3.3VConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1, J3
212pFCapacitor_SMD:C_0603_1608MetricC8, C9
21uFCapacitor_SMD:C_0603_1608MetricC2, C14
260RResistor_SMD:R_0603_1608MetricR30, R31
2PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ9, J11
2Tact Switch 6x6mm / 13mmButton_Switch_THT:SW_PUSH_6mmSW2, SW3
14.7nFCapacitor_SMD:C_0603_1608MetricC16
1BC817-40-DIOPackage_TO_SOT_SMD:SOT-23Q1
1Buzzer 5V 12mmBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1CANConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ17
1CANConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ16
1ESDCAN01-2BLYPackage_TO_SOT_SMD:SOT-23D2
1FM24CL16B-GTRPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
1GNDConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ5
1GPAConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ13
1GPBConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ14
1LCD 16x2Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ15
1M24C32-WMN6TPPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU6
1M7-DIODiode_SMD:D_SMAD3
1MCP23017x-x-SSPackage_SO:SSOP-28_5.3x10.2mm_P0.65mmU8
1MCP7940N-I/SNPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1MISOConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ2
1MOSIConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ4
1MX25L25673GM2I-08GPackage_SO:SOIC-8_5.3x5.3mm_P1.27mmU1
1OSTBPCS2C2BLED_SMD:LED_Avago_PLCC4_3.2x2.8mm_CWD6
1PCA9306DCURPackage_SO:VSSOP-8_2.3x2mm_P0.5mmU4
1PCF8563TPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU5
1QT3CD-32.768KEZF-TCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY1
1QT3CD-32.768KEZY-TCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY2
1RXConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ12
1SCKConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ7
1SCLConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ8
1SDAConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ6
1SHT4xSensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPadU7
1SN65HVD230DRPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU10
1SW_DIP_x03Button_Switch_THT:SW_DIP_SPSTx03_Slide_9.78x9.8mm_W7.62mm_P2.54mmSW1
1TCA9548APWRPackage_SO:TSSOP-24_4.4x7.8mm_P0.65mmU9
1TXConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ10

More from WestianPKl/pcb-docs

12
  • 2 layers94.7 × 71.8 mmIoT Logger B 1.0, the printed circuit board in 3D

    IoT Logger B 1.0

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    147 parts
  • 2 layers74.1 × 91.8 mmSTM Board, the printed circuit board in 3D

    STM Board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    131 parts
  • 2 layers160 × 158 mmTree Board, the printed circuit board in 3D

    Tree Board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    119 parts
  • 2 layers160 × 158 mmTree Board, the printed circuit board in 3D

    Tree Board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    116 parts
  • 2 layers100 × 80 mmController board, the printed circuit board in 3D

    Controller board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    114 parts
  • 2 layers94.7 × 71.8 mmIoT Logger C 1.0, the printed circuit board in 3D

    IoT Logger C 1.0

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    107 parts
  • 2 layers65.2 × 80 mmTest board, the printed circuit board in 3D

    Test board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    96 parts
  • 2 layers100.5 × 83 mmPicoLogger, the printed circuit board in 3D

    PicoLogger

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    81 parts
  • 2 layers100 × 80 mmOutput board, the printed circuit board in 3D

    Output board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    76 parts
  • 2 layers100 × 80 mmPower board, the printed circuit board in 3D

    Power board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    75 parts
  • 2 layers100 × 80 mmCommunication board, the printed circuit board in 3D

    Communication board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    68 parts
  • 2 layers100 × 60 mmPower board old, the printed circuit board in 3D

    Power board old

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    66 parts

Similar boards

  • 4 layers93.2 × 57 mmMainboard v1.1, the printed circuit board in 3D

    Mainboard v1.1

    MarcusOJ/lora-based-remotecontrol

    113 partsGPL-3.0
  • 4 layers50 × 65 mmFeroFlyF405, the printed circuit board in 3D

    FeroFlyF405

    Ozonised/FeroFlyF405

    FeroFlyF405 an open source STM32F405 based flight controller running INAV

    150 parts44CERN-OHL-P-2.0
  • 2 layers72.1 × 70.7 mmBramble, the printed circuit board in 3D

    Bramble

    erikbeerepoot/bramble

    Bramble: Precision Agriculture Mesh

    121 parts
  • 4 layers67 × 51 mmBC Heater, the printed circuit board in 3D

    BC Heater

    rasusmilch/BC_Heater

    132 parts
  • 2 layers150 × 150 mmMainBorad, the printed circuit board in 3D

    MainBorad

    wakimizufu/TBSEQ

    235 parts
  • 4 layers85 × 56 mmAnthC, the printed circuit board in 3D

    AnthC

    Anthilla/AnthC

    Anthilla AnthC Board

    211 parts40
  • 4 layers100 × 100 mmX16fpga, the printed circuit board in 3D

    X16fpga

    eshankiyer/x16-fpga-board

    Commander X16-compatible computer on one 100x100 mm 4-layer board: Spartan-6 + iCE40 (official VERA), SDRAM, two expansion slots. KiCad, JLCPCB fab files, Verilog gateware.

    224 parts

Questions

How big is the Device Board PCB?

It measures 94.7 × 71.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Device Board use?

104 parts, built around the SN65HVD230DR, MX25L25673GM2I-08G, FM24CL16B-GTR and M24C32-WMN6TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Device Board KiCad files?

From the WestianPKl/pcb-docs repository on GitHub, at the commit this page was made from: the board is Device_Board/Device_Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Device Board design in my own project?

Its repository states no licence, so its author keeps all rights: ask WestianPKl before reusing the design.