Skip to the content
12345678

MCP7940N-I/SN

Microchip TechnologyExtended

-40℃~+85℃ 1.2uA 1.8V~5.5V 925nA External I2C Temperature compensation、Backup power management and battery charging、InsideSRAM/NVRAM、Timestamp function、Programmable clock output、Alarm function、Power-off retention of registers、ESD/Overvoltage protection、Periodic interrupt output Yes SOIC-8 Real Time Clocks ROHS

Part id
microchip/MCP7940N-I/SN
Category
Real Time Clocks
Package
SOIC-8
Pins
8
In stock
4,459 at JLCPCB (C148052)
Used on
6 open-source boards

Overview

The MCP7940N-I/SN is a real Time Clock made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+85℃ 1.2uA 1.8V~5.5V 925nA External I2C Temperature compensation、Backup power management and battery charging、InsideSRAM/NVRAM、Timestamp function、Programmable clock output、Alarm function、Power-off retention of registers、ESD/Overvoltage protection、Periodic interrupt output Yes SOIC-8 Real Time Clocks ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP7940N-I_SN, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 4,459 are in stock at JLCPCB (part C148052). 6 open-source boards in 6 repositories on GitHub use it.

Symbol

1X12X23VBAT4VSS5SDA6SCL7MFP8VCC
EasyEDA_Cloud:MCP7940N-I_SNFrom EasyEDA

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

11
Supply, least
1.8 V · VCC, recommended operating min · p. 3
Supply, most
5.5 V · VCC, recommended operating max · p. 3
Supply, least
1.3 V · VBAT, backup supply min · p. 3
Supply, absolute maximum
6.5 V · VCC, absolute max · p. 3
Works from
-40 °C · Industrial ambient operating min · p. 3
Works up to
85 °C · Industrial ambient operating max · p. 3
Takes working
1.2 µA · VCC, typical timekeeping current at 3.3V · p. 3
Takes at most
400 µA · VCC, max register write current at 5.5V, SCL = 400 kHz · p. 3
Takes asleep
1 µA · VCC, max data-retention current, oscillator off, Industrial · p. 3
Takes asleep
750 nA · VBAT, max data-retention current at 3.6V, oscillator off · p. 4
Data rate, most
400 kbit/s · I2C max clock rate at 2.5V ≤ VCC ≤ 5.5V · p. 5

What it is and has

11
Function
Battery-backed I2C real-time clock/calendar with SRAM · p. 1
SRAM
64-byte, battery-backed · p. 1
Alarms
2 programmable alarms · p. 1
Calendar
Leap year compensated to 2399 · p. 1
Time format
12/24 hour modes · p. 1
Oscillator
32.768 kHz crystals · p. 1
Crystal load capacitance
6-9 pF · p. 1
Digital trimming resolution
±1 PPM · p. 1
Digital trimming range
±129 PPM · p. 1
I2C
Up to 400 kHz · p. 1
Battery backup
Automatic switchover · p. 1

Around it

4
res 10 k
between SDA and VCC; Typical pull-up for 100 kHz operation. · p. 8
res 2 k
between SDA and VCC; Typical pull-up for 400 kHz operation. · p. 8
res 10 k
between MFP and Vcc; Typical pull-up; MFP may be left floating if unused. · p. 8
crystal 32.768 kHz
between X1 and X2; Quartz crystal with matching external load capacitors; optimized for 6-9 pF load capacitance. · p. 8

Specifications

49
ParameterConditionsAs printedPage
VCC VCCmax 6.5 V3
All inputs and outputs (except SDA and SCL) w.r.t. VSSmin -0.6 V3
SDA and SCL w.r.t. VSSmin -0.6 · max 6.5 V3
Storage temperaturemin -65 · max 150 °C3
Ambient temperature with power appliedmin -40 · max 125 °C3
Operating supply voltage and ambient temperatureIndustrial (I); VCC in V, TA in °Cmin 1.8 · max 5.5 V3
Ambient temperature TAIndustrial (I); VCC = +1.8V to 5.5Vmin -40 · max 85 °C3
Hysteresis of Schmitt Trigger inputs (SDA, SCL pins) VHYSNote 1; minimum is 0.05 × VCCmin 0.05 V3
Low-level output voltage (MFP, SDA pins) VOLIOL = 3.0 mA @ VCC = 4.5V; IOL = 2.1 mA @ VCC = 2.5Vmax 0.4 V3
Pin capacitance (SDA, SCL, MFP pins) CIN, COUTVCC = 5.0V; TA = 25°C, f = 1 MHz; Note 1max 10 pF3
Oscillator pin capacitance (X1, X2 pins) COSCNote 1typ 3 pF3
SRAM/RTCC register operating current ICCREADVCC = 5.5V, SCL = 400 kHz; readmax 300 A3
SRAM/RTCC register operating current ICCWRITEVCC = 5.5V, SCL = 400 kHz; writemax 400 A3
VCC data-retention current (oscillator off) ICCDATSCL, SDA, VCC = 5.5V (I-Temp)max 1 A3
Timekeeping current ICCTVCC = 3.3V; Note 1typ 1.2 A3
Power-fail switchover voltage VTRIPmin 1.3 · typ 1.5 · max 1.7 V3
Backup supply voltage range VBATNote 1min 1.3 · max 5.5 V3
Timekeeping backup current IBATTVBAT = 1.3V, VCC = VSS; Note 1max 850 nA3
Timekeeping backup current IBATTVBAT = 3.0V, VCC = VSS; Note 1typ 925 · max 1200 nA3
Timekeeping backup current IBATTVBAT = 5.5V, VCC = VSS; Note 1max 9000 nA3
VBAT data retention current (oscillator off) IBATDATVBAT = 3.6V, VCC = VSSmax 750 nA4
Clock frequency FCLK1.8V ≤ VCC < 2.5Vmax 100 kHz5
Clock frequency FCLK2.5V ≤ VCC ≤ 5.5Vmax 400 kHz5
Clock high time THIGH1.8V ≤ VCC < 2.5Vmin 4000 ns5
Clock high time THIGH2.5V ≤ VCC ≤ 5.5Vmin 600 ns5
Clock low time TLOW1.8V ≤ VCC < 2.5Vmin 4700 ns5
Clock low time TLOW2.5V ≤ VCC ≤ 5.5Vmin 1300 ns5
SDA and SCL rise time TR1.8V ≤ VCC < 2.5V; Note 1max 1000 ns5
SDA and SCL rise time TR2.5V ≤ VCC ≤ 5.5V; Note 1max 300 ns5
SDA and SCL fall time TF1.8V ≤ VCC < 2.5V; Note 1max 1000 ns5
SDA and SCL fall time TF2.5V ≤ VCC ≤ 5.5V; Note 1max 300 ns5
Start condition hold time THD:STA1.8V ≤ VCC < 2.5Vmin 4000 ns5
Start condition hold time THD:STA2.5V ≤ VCC ≤ 5.5Vmin 600 ns5
Start condition setup time TSU:STA1.8V ≤ VCC < 2.5Vmin 4700 ns5
Start condition setup time TSU:STA2.5V ≤ VCC ≤ 5.5Vmin 600 ns5
Data input hold time THD:DATNote 2min 0 ns5
Data input setup time TSU:DAT1.8V ≤ VCC < 2.5Vmin 250 ns5
Data input setup time TSU:DAT2.5V ≤ VCC ≤ 5.5Vmin 100 ns5
Stop condition setup time TSU:STO1.8V ≤ VCC < 2.5Vmin 4000 ns5
Stop condition setup time TSU:STO2.5V ≤ VCC ≤ 5.5Vmin 600 ns5
Output valid from clock TAA1.8V ≤ VCC < 2.5Vmax 3500 ns5
Output valid from clock TAA2.5V ≤ VCC ≤ 5.5Vmax 900 ns5
Bus free time: Time the bus must be free before a new transmission can start TBUF1.8V ≤ VCC < 2.5Vmin 4700 ns5
Bus free time: Time the bus must be free before a new transmission can start TBUF2.5V ≤ VCC ≤ 5.5Vmin 1300 ns5
Input filter spike suppression (SDA and SCL pins) TSPNote 1max 50 ns5
VCC fall time TFVCCNote 1min 300 s5
VCC rise time TRVCCNote 1min 0 s5
Oscillator frequency FOSCtyp 32.768 kHz5
Oscillator timeout period TOSFNote 1min 1 ms5

Pins, by the datasheet

8
1 X1
Quartz crystal input or external oscillator input. · p. 8
2 X2
Quartz crystal output. · p. 8
3 VBAT
Battery backup supply input; connect to VSS if battery backup is unused. · p. 8
4 Vss
Ground. · p. 8
5 SDA
Bidirectional I2C serial data; requires a pull-up resistor to VCC. · p. 8
6 SCL
I2C serial clock input synchronizes data transfer. · p. 8
7 MFP
Alarm, square wave or general purpose output; requires a pull-up to Vcc and may float if unused. · p. 8
8 Vcc
Primary power supply. · p. 8

Open-source boards using it

6
  • 4 layers85 × 56 mmAnthC, the printed circuit board in 3D

    AnthC

    Anthilla/AnthC

    Anthilla AnthC Board

    211 parts40
  • 4 layers100 × 100 mmX16fpga, the printed circuit board in 3D

    X16fpga

    eshankiyer/x16-fpga-board

    Commander X16-compatible computer on one 100x100 mm 4-layer board: Spartan-6 + iCE40 (official VERA), SDRAM, two expansion slots. KiCad, JLCPCB fab files, Verilog gateware.

    224 parts
  • 2 layers77.1 × 47.9 mmEnvMonDev Continuous Power, the printed circuit board in 3D

    EnvMonDev Continuous Power

    msbavaresco/Environmental-Monitoring-Device

    This project is a device that measures CO2 concentration, temperature and relative humididty using Sensirion's SCD4x sensor and a Raspberry Pi Zero W.

    33 partsGPL-3.0
  • 2 layers100 × 100 mmPdu, the printed circuit board in 3D

    Pdu

    SBC-PDU/unit-hardware

    Hardware disign files for SBC PDU

    128 parts
  • 2 layers23.4 × 26.7 mmEpoch, the printed circuit board in 3D

    Epoch

    winneymj/kicad-mem_disp_adaptor

    Memort Display Kicad adapter board

    9 partsMIT
  • 2 layers94.7 × 71.8 mmDevice Board, the printed circuit board in 3D

    Device Board

    WestianPKl/pcb-docs

    A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…

    104 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP7940N-I/SN?

Yes. The symbol is EasyEDA_Cloud:MCP7940N-I_SN and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP7940N-I/SN?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP7940N-I/SN datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP7940N-I/SN?

JLCPCB lists it as part C148052, with 4,459 in stock; the sellers' links on this page open their listings.

What can replace the MCP7940N-I/SN?

Parts like it in the library: the PCF8563T/5 by NXP Semiconductors, the PCF8523T/1 by NXP Semiconductors, the PCF85163T/1 by NXP Semiconductors and the DS3231MZ+TRL by Maxim Integrated (Analog Devices). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP7940N-I/SN?

6 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.