

Bramble
Bramble: Precision Agriculture Mesh
- Size
- 72.1 × 70.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 121
- Nets
- 131
- Pads
- 438
- Tracks, vias
- 1,250, 92
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Jun 2025
- Updated
- 2 Aug 2026
Overview
Bramble is an open-source printed circuit board by erikbeerepoot, from the erikbeerepoot/bramble repository on GitHub. It is a 2-layer board of 72.1 × 70.7 mm with 121 parts on 131 nets, routed with 1,250 tracks and 92 vias.
It is built around the TPSM861253RDXR, MT25QL01GBBB8ESF-0SIT and FM24CL16B-GTR, with the B2B-PH-K-S, WS2812B-2020 and 1N4148W among its other parts. Its parts include 27 capacitors, 23 resistors, 7 ICs, 6 connectors and 2 switches. It belongs with the RP2350 and STM32 boards of this library.
Main components
7TPSM861253RDXR
QFN-FCMOD-7(3.3x4)-40℃~+125℃ 1 1.4MHz 1A 20mVp-p 2mm 3.3V 3.3mm 370uA 3V~17V 4mm Over-temperature protection、Over Current Protection、Overvoltage protection、Under Voltage Protection、Automatic fault recovery Step-down type ±1% QFN-FCMOD-7(3.3x4) DC-DC Power Modules ROHSTexas InstrumentsDC-DC Power ModulesMT25QL01GBBB8ESF-0SIT
SOIC-16-300mil-40℃~+85℃ 1.8ms 100,000 cycles 133MHz 1Gbit 2.7V~3.6V 20 Years Hardware write protection、Software write protection、Write enable latch SPI SO-16-300mil NOR FLASH ROHSMicron TechNOR FLASHFM24CL16B-GTR
SOIC-8-40℃~+85℃ 100,000,000,000,000 Cycles 151 Years 16Kbit 1MHz 2.7V~3.65V 300uA 3uA I2C SOIC-8 FRAM ROHSInfineon TechnologiesFRAMB2B-PH-K-S
插件,P=2mmUncategorisedJSTWS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
README
README.mdBramble
LoRa sensor and actuator network for farm monitoring, built on RP2040.
Hub-and-spoke architecture: a central hub manages the network while nodes collect sensor data (temperature, humidity) and control actuators (irrigation valves). LoRa provides long-range wireless with reliable delivery guarantees.
Hardware
- Adafruit Feather RP2040 LoRa (SX1276, 915 MHz)
- MT25QL01GBBB 128MB external flash for sensor data storage
- STM32L010 PMU for power management and sleep
Building
Requires the Pico SDK. CMake is bundled at ~/.pico-sdk/cmake/v3.31.5/bin/cmake.
# Build a specific variant
cmake -B build -DHARDWARE_VARIANT=SENSOR
cmake --build build -j8
# Variants: SENSOR, IRRIGATION, CONTROLLER, HUB, GENERIC, ALLEach variant produces a named executable (e.g. bramble_sensor.uf2).
# Run tests
cmake -B build -DBUILD_TESTS=ON
cmake --build build -j8Flashing
Hold BOOTSEL and connect via USB, then copy the .uf2 file. Or use OpenOCD with a debug probe:
~/.pico-sdk/openocd/0.12.0+dev/openocd \
-s ~/.pico-sdk/openocd/0.12.0+dev/scripts \
-f interface/cmsis-dap.cfg -f target/rp2040.cfg \
-c "adapter speed 5000" \
-c "program build/bramble_sensor.elf verify reset exit"Architecture
[Sensor Nodes] --LoRa--> [Hub/Pico] --Serial--> [Raspberry Pi] --REST--> [Dashboard]
| |
128MB Flash DuckDB
(local buffer) (long-term storage)Firmware (src/)
modes/- Application modes per hardware variant (sensor, irrigation, hub, etc.)lora/- SX1276 driver, message protocol, reliable delivery, routinghal/- Hardware abstraction (flash, NeoPixel, valves, SPI)storage/- 128MB circular flash buffer for sensor recordsconfig/- Persistent node/hub configuration
API (api/)
Flask REST API on the Raspberry Pi. Receives sensor data from the hub over serial, stores in DuckDB.
cd api && uv sync && uv run app.pyDashboard (dashboard/)
React SPA for viewing sensor data, managing nodes, and organizing zones.
cd dashboard && npm install && npm run devSetup
After cloning:
./setup.sh # configures git hooksSee CLAUDE.md for development guidelines and PLAN.md for the roadmap.
Parts
121| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | Capacitor_SMD:C_0402_1005Metric | C13, C16, C17, C18, C19, C20, C21, C22, C23, C24, C27 |
| 4 | 1K | Capacitor_SMD:C_0402_1005Metric | R16, R17, R21, R22 |
| 4 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C11, C12, C14, C15 |
| 4 | MountingHole | MountingHole:MountingHole_3.5mm_Pad | H1, H2, H3, H4 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C8 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R5, R9, R10 |
| 3 | 10k | Capacitor_SMD:C_0402_1005Metric | R11, R12, R23 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R3, R6 |
| 2 | 100 | Capacitor_SMD:C_0402_1005Metric | R14, R15 |
| 2 | 10pF | Capacitor_SMD:C_0805_2012Metric | C9, C10 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C25, C26 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R18, R19 |
| 2 | B2B-PH-K-S | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | MAIN_SUPPLY1, PMU_SUPPLY1 |
| 2 | G*** | kibuzzard-69F1FACD | kibuzzard-69F1FACD, kibuzzard-69F1FACD |
| 2 | G*** | kibuzzard-69F1FB2A | kibuzzard-69F1FB2A, kibuzzard-69F1FB2A |
| 2 | G*** | kibuzzard-69F15D48 | kibuzzard-69F15D48, kibuzzard-69F15D48 |
| 2 | G*** | kibuzzard-69F15D5F | kibuzzard-69F15D5F, kibuzzard-69F15D5F |
| 2 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | PMU_STATUS1, RPI_STATUS1 |
| 1 | 0.1 | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R4 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D1 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 3.3uH | Inductor_SMD:L_Murata_DFE201610P | L1 |
| 1 | 33 | Capacitor_SMD:C_0402_1005Metric | R13 |
| 1 | 3V3 TEST | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 5.1K | Capacitor_SMD:C_0402_1005Metric | R20 |
| 1 | 8.2k | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_EVQP2_MiddlePushTravel_H2.5mm | SW1 |
| 1 | Conn_01x05_Pin | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | Crystal | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | FM24CL16B-GTR | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U4 |
| 1 | G*** | kibuzzard-69F1FB6D | kibuzzard-69F1FB6D |
| 1 | G*** | kibuzzard-69F1F948 | kibuzzard-69F1F948 |
| 1 | G*** | kibuzzard-69F1FBEC | kibuzzard-69F1FBEC |
| 1 | G*** | kibuzzard-69F1FA9E | kibuzzard-69F1FA9E |
| 1 | G*** | kibuzzard-69F15CED | kibuzzard-69F15CED |
| 1 | G*** | kibuzzard-69F1F93E | kibuzzard-69F1F93E |
| 1 | G*** | kibuzzard-69F209F9 | kibuzzard-69F209F9 |
| 1 | G*** | kibuzzard-69F15DA2 | kibuzzard-69F15DA2 |
| 1 | G*** | kibuzzard-69F20A1A | kibuzzard-69F20A1A |
| 1 | G*** | kibuzzard-69F1FC5E | kibuzzard-69F1FC5E |
| 1 | G*** | kibuzzard-69F1FB43 | kibuzzard-69F1FB43 |
| 1 | G*** | kibuzzard-69F204DC | kibuzzard-69F204DC |
| 1 | G*** | kibuzzard-69F1FAE9 | kibuzzard-69F1FAE9 |
| 1 | G*** | kibuzzard-69F1FB5C | kibuzzard-69F1FB5C |
| 1 | G*** | kibuzzard-69F20A0D | kibuzzard-69F20A0D |
| 1 | G*** | kibuzzard-69F1FB3C | kibuzzard-69F1FB3C |
| 1 | G*** | kibuzzard-69F15D28 | kibuzzard-69F15D28 |
| 1 | G*** | kibuzzard-69F1FB08 | kibuzzard-69F1FB08 |
| 1 | G*** | kibuzzard-69F1FABA | kibuzzard-69F1FABA |
| 1 | G*** | kibuzzard-69F204CF | kibuzzard-69F204CF |
| 1 | GPIO1 | Connector_IDC:IDC-Header_2x06_P2.54mm_Vertical | J6 |
| 1 | GPIO2 | Connector_IDC:IDC-Header_2x06_P2.54mm_Vertical | J7 |
| 1 | GPIO3 | Connector_IDC:IDC-Header_2x06_P2.54mm_Vertical | J8 |
| 1 | LOGO | Bramble:bramble logo | G*** |
| 1 | MAINS TEST | TestPoint:TestPoint_Pad_1.5x1.5mm | TP4 |
| 1 | MCP1700x-120xxMB | Package_TO_SOT_SMD:SOT-89-3_Handsoldering | U3 |
| 1 | MT25QL01GBBB8ESF-0SIT | Package_SO:SOIC-16W-12_7.5x10.3mm_P1.27mm | U8 |
| 1 | NiceRF Lora1262 | RF_Module:HOPERF_RFM9XW_SMD | U5 |
| 1 | Opamp_Quad | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1 |
| 1 | PMU SUPPLY TEST | TestPoint:TestPoint_Pad_1.5x1.5mm | TP6 |
| 1 | Parallel 1 | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP2 |
| 1 | Parallel 2 | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP3 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_EVQP2_MiddlePushTravel_H2.5mm | SW2 |
| 1 | RP2350_80QFN | RP2350_80QFN_minimal:RP2350-QFN-80-1EP_10x10_P0.4mm_EP3.4x3.4mm_ThermalVias | U6 |
| 1 | RPI SWD | Connector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J3 |
| 1 | RX_TEST | TestPoint:TestPoint_Pad_1.5x1.5mm | TP2 |
| 1 | STM32L031F6P6TR | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | STM_RESET | Button_Switch_SMD:SW_SPST_EVQP2_MiddlePushTravel_H2.5mm | STM_RESET1 |
| 1 | STM_WAKE | Button_Switch_SMD:SW_SPST_EVQP2_MiddlePushTravel_H2.5mm | STM_WAKE1 |
| 1 | Series | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP1 |
| 1 | TAP TEST | TestPoint:TestPoint_Pad_1.5x1.5mm | TP5 |
| 1 | TPSM861253RDXR | Bramble:VREG_TPSM861253RDXR | VR1 |
| 1 | TX_TEST | TestPoint:TestPoint_Pad_1.5x1.5mm | TP3 |
| 1 | U.FL | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J4 |
The 118 most common of 121 parts.
More from erikbeerepoot/bramble
4- 2 layers

- 4 layers68 × 64.3 mm

- 2 layers

- 2 layers37.3 × 42.3 mm

Similar boards
- 4 layers51.4 × 101.8 mm

- 2 layers150 × 150 mm

- 4 layers67 × 51 mm

- 2 layers94.7 × 71.8 mm

Device Board
WestianPKl/pcb-docs
A collection of custom PCB designs created in KiCAD, centered around the Raspberry Pi Pico (RP2040) platform. Each board is a standalone module that connects to the Main Board and extends its functionality via I2C, SPI…
104 parts - 6 layers65 × 112 mm

BitaxeGT
bitaxeorg/BitaxeGT
Bitaxe Gamma Turbo 2x BM1370 ASIC ESP32 powered Bitcoin miner
187 parts70CERN-OHL-S-2.0 - 6 layers130 × 112 mm

- 2 layers114.8 × 115 mm

- 6 layers65 × 112 mm

Questions
How big is the Bramble PCB?
It measures 72.1 × 70.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bramble use?
121 parts, built around the TPSM861253RDXR, MT25QL01GBBB8ESF-0SIT, FM24CL16B-GTR and B2B-PH-K-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bramble KiCad files?
From the erikbeerepoot/bramble repository on GitHub, at the commit this page was made from: the board is schematics/bramble/bramble-main/bramble.kicad_pcb and its schematic schematics/bramble-fan-control/driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bramble design in my own project?
Its repository states no licence, so its author keeps all rights: ask erikbeerepoot before reusing the design.