2 layers132 × 100 mm
2 layers82 × 91.2 mm
A laser projector system which plays video games.
- Size
- 82 × 91.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 118
- Pads
- 256
- Tracks, vias
- 993, 110
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 18 Jan 2019
- Updated
- 20 Mar 2019
Overview
PongPCB is an open-source printed circuit board by VectorSpaceHQ, from the VectorSpaceHQ/LaserGameSystem repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 82 × 91.2 mm with 43 parts on 118 nets, routed with 993 tracks and 110 vias.
It is built around the TL082, MCP4922-E/P and NE555. Its parts include 9 resistors, 8 ICs, 8 connectors, 2 capacitors and 2 diodes.
Main components
3
TL082
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 13V/us 2 2.5nA 36V 3MHz 3mV 85dB Short-Circuit Protection SOP-8 FET Input Amplifiers ROHSGcoreOperational Amplifier
MCP4922-E/P
PDIP-14-40℃~+125℃ 0.25LSB、4LSB 12 2 2.7V~5.5V 350uA 4.5us Power-on reset、Power-down mode、Programmable gain SPI Voltage Buffer PDIP-14 Digital to Analog Converters (DAC) ROHSMicrochip TechnologyDigital To Analog Converters (DAC)NE555
SOP-8-20℃~+70℃ 1 1.5mA 200mA 4.5V~15V Adjustable duty cycle oscillation、Reset function、Duty cycle stabilization SOP-8 555 Timers / Counters ROHSGRTimers / Counters
README
README.mdLaserGameSystem
A laser projector system which plays video games.
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4, R6, R7, R8 |
| 4 | 10k | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV1, RV2, RV3, RV4 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 2 | 4081 | Package_DIP:DIP-14_W7.62mm | U7, U8 |
| 2 | 47k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R5 |
| 2 | Conn_01x05_Male | Connector_JST:JST_XH_B05B-XH-AM_1x05_P2.50mm_Vertical | Joy1, Joy2 |
| 2 | Conn_02x19_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x19_P2.54mm_Vertical | CN7, CN10 |
| 2 | D | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D1, D2 |
| 2 | Rotary_Encoder_Switch | Connector_JST:JST_XH_B05B-XH-AM_1x05_P2.50mm_Vertical | Rotary1, Rotary2 |
| 2 | TL082 | Package_DIP:DIP-8_W7.62mm | U2, U5 |
| 2 | levelshift | Package_DIP:DIP-12_W10.16mm | U3, U4 |
| 1 | 100K | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV5 |
| 1 | 101 | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C2 |
| 1 | 104 | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1 |
| 1 | 2K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R9 |
| 1 | LOGO | pcb:VSlogo | G*** |
| 1 | LaserToggle | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | MCP4922 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | NE555 | Package_DIP:DIP-8_W7.62mm | U6 |
| 1 | PowerInput | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | XJumper1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | X-J1 |
| 1 | XJumper2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | X-J2 |
| 1 | X_ILDA_OUT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Xprobe | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | YJumper1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Y-J1 |
| 1 | YJumper2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | Y-J2 |
| 1 | Y_ILDA_OUT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Yprobe | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6 |
Questions
How big is the PongPCB PCB?
It measures 82 × 91.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PongPCB use?
43 parts, built around the TL082, MCP4922-E/P and NE555. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PongPCB KiCad files?
From the VectorSpaceHQ/LaserGameSystem repository on GitHub, at the commit this page was made from: the board is pcb/pongPCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PongPCB design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers162.8 × 99.9 mm
PSU
Sakib-Ansari/Linear_Programmable_Power_Supply
This repository contains the complete KiCad project for a multi-board linear programmable bench power supply. The design is organized into separate PCBs, including the Power Board, Control Board, Front Panel, Output…
133 partsMIT - 2 layers81.3 × 96.5 mm
- 2 layers91.4 × 101.6 mm
Vector gen
qu1j0t3/vector_gen
In first version of PCB there is a bug that leaves U6 Vss/Vdd pins floating and U5 Vdd floating:
103 parts13 - 2 layers95.9 × 112.6 mm
- 2 layers94.6 × 25 mm
- 2 layers17.8 × 45.7 mm
- 2 layers10 × 91.4 mm
ArduinoMidiEurorackToCv
Felan7/midiFox
The MidiFox is a small Eurorack Module, that takes a Midi-Signal via MicroUSB from a Computer and turns it into Eurorack usbale Note value, midi velocity and gate CV.
8 parts2