Skip to the content
1234567891011121314

MCP4922-E/P

Microchip TechnologyExtended

-40℃~+125℃ 0.25LSB、4LSB 12 2 2.7V~5.5V 350uA 4.5us Power-on reset、Power-down mode、Programmable gain SPI Voltage Buffer PDIP-14 Digital to Analog Converters (DAC) ROHS

Part id
microchip/MCP4922-E/P
Category
Digital To Analog Converters (DAC)
Package
PDIP-14
Pins
14
In stock
0 at JLCPCB (C645760)
Used on
40 open-source boards

Overview

The MCP4922-E/P is a digital To Analog Converter made by Microchip Technology in a PDIP-14 package with 14 pins. -40℃~+125℃ 0.25LSB、4LSB 12 2 2.7V~5.5V 350uA 4.5us Power-on reset、Power-down mode、Programmable gain SPI Voltage Buffer PDIP-14 Digital to Analog Converters (DAC) ROHS.

PCBKit's library has its KiCad symbol (Analog_DAC:MCP4922, from KiCad's library) and its footprint (Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C645760). 40 open-source boards in 31 repositories on GitHub use it.

Symbol

1Vdd3CS4SCK5SDI8LDAC9SHDN10VB11VrefB12Vss13VrefA14VA
Analog_DAC:MCP4922From KiCad's library

Footprint

1234567891011121314
Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

14
The pins of the MCP4922-E/P
PinNameType
1VddPower in
2NCNot connected
3CSInput
4SCKInput
5SDIInput
6NCNot connected
7NCNot connected
8LDACInput
9SHDNInput
10VBOutput
11VrefBInput
12VssPower in
13VrefAInput
14VAOutput

Open-source boards using it

40See all 40
  • 2 layers81.3 × 96.5 mmMidi2cv, the printed circuit board in 3D

    Midi2cv

    tomarus/midi2cv

    Eurorack MIDI2CV and Arpeggiator using an Arduino Nano.

    63 parts31
  • 2 layers91.4 × 101.6 mmVector gen, the printed circuit board in 3D

    Vector gen

    qu1j0t3/vector_gen

    In first version of PCB there is a bug that leaves U6 Vss/Vdd pins floating and U5 Vdd floating:

    103 parts13
  • 2 layers95.9 × 112.6 mmLab supply, the printed circuit board in 3D

    Lab supply

    prydin/lab-supply

    Linear 0-30V, 2A lab supply

    90 parts8
  • 2 layers94.6 × 25 mmSlider synth, the printed circuit board in 3D

    Slider synth

    udu3324/slider-synth

    A esp32 based synth that uses a touch pot and fsr.

    50 parts8GPL-3.0
  • 2 layers17.8 × 45.7 mmDream controller, the printed circuit board in 3D

    Dream controller

    mprosk/dream-controller

    Joycon meets Steam Controller

    4 parts3MIT
  • 2 layers10 × 91.4 mmArduinoMidiEurorackToCv, the printed circuit board in 3D

    ArduinoMidiEurorackToCv

    Felan7/midiFox

    The MidiFox is a small Eurorack Module, that takes a Midi-Signal via MicroUSB from a Computer and turns it into Eurorack usbale Note value, midi velocity and gate CV.

    8 parts2
  • 2 layers132.8 × 93 mmCharge, the printed circuit board in 3D

    Charge

    yu65536/Power-Eater

    Ni-MH battery charger for mini4wd ミニ四駆用ニッケル水素充電器

    140 parts2
  • 2 layers132 × 100 mmMiniControl, the printed circuit board in 3D

    MiniControl

    gkaxowns9/DAC-for-minimoog

    승빈승빈 위드 함 미니무그에 넣을 DAC

    53 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP4922-E/P?

Yes. The symbol is Analog_DAC:MCP4922 and the footprint Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP4922-E/P?

PDIP-14, with 14 pins. Its footprint is drawn on this page.

Where is the MCP4922-E/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP4922-E/P?

JLCPCB lists it as part C645760, with 0 in stock; the sellers' links on this page open their listings.

What can replace the MCP4922-E/P?

Parts like it in the library: the MCP4902-E/P by Microchip Technology, the TLC5620IN by Texas Instruments, the AD7395AN by Analog Devices and the AD8522ANZ by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP4922-E/P?

40 boards in 31 repositories on GitHub; the most starred are listed on this page, with their KiCad files.