

Modulo Lector
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 126
- Nets
- 98
- Pads
- 387
- Tracks, vias
- 1,451, 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Sep 2018
- Updated
- 7 Dec 2018
Overview
Modulo Lector is an open-source printed circuit board by vecchiettidaniel, from the vecchiettidaniel/caja-negra repository on GitHub. It is a 2-layer board with 126 parts on 98 nets, routed with 1,451 tracks and 4 vias.
It is built around the MAX485ED, LM324AD and LM2575-5.0WT, with the LM324BID, LM324CDRG and LM317T among its other parts. Its parts include 52 resistors, 13 diodes, 13 connectors, 11 ICs and 6 capacitors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
7MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICsLM324AD
SOIC-14-16V~-1.5V、1.5V~16V -25℃~+85℃ 1.2MHz 2nA 300nA 35nV/√Hz@1kHz 3V~32V 4 500V/ms 60mA 7mV 800uA 80dB EMI filtering/RF suppression SOIC-14 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM2575-5.0WT
TO-220-5-40℃~+85℃ 1 1A 4V~40V 52kHz 5V 5mA Buck Buck Built-in Fixed No TO-220-5 DC-DC Converters ROHSMicrochip TechnologyDC-DC ConvertersLM324BID
SOIC-14-18V~-2.5V、2.5V~18V -40℃~+85℃ 1.2MHz 10nA 20mA 240uA 35nV/√Hz@1kHz 3V~36V 4 500V/ms 500pA 600uV 7uV/℃ 80dB SOIC-14 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM324CDRG
SOP-14-15V~-1.5V、1.5V~15V 0℃~+70℃ 3V~30V 4 40mA 45nA 5mV 5nA 600uA 80dB SOP-14 Operational Amplifier ROHSHANSCHIP semiconductorOperational AmplifierLM317T
TO-2200.003%Vout 0℃~+125℃@(Tj) 1 1.2V~37V 1.5A 40V 66dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM35
TO-92UncategorisedSilicore
README
README.mdcaja-negra
Aca va todo lo que quiero tener dispnible, es un pendrive online
Parts
126| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 120 | Discret:R3 | R402, R402, R402, R402 |
| 4 | 1N4007 | Discret:D3 | D401, D401, D401, D401 |
| 4 | 2N2907 | mis-footprint:TBJ-To18 | Q401, Q401, Q401, Q401 |
| 4 | 330 | Discret:R3 | R401, R401, R401, R401 |
| 4 | 36 | Discret:R3 | R404, R404, R404, R404 |
| 4 | 4.7k | Discret:R3 | R403, R403, R403, R403 |
| 4 | LM317T | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | U401, U401, U401, U401 |
| 4 | LM35 | TO_SOT_Packages_THT:TO-92_Inline_Wide | U402, U402, U402, U402 |
| 4 | Loop_IN | mis-footprint:Pin-1x2 | P401, P401, P401, P401 |
| 2 | GLCD-10K | Discret:R3 | R101, R102 |
| 1 | 3v3_100uF | Capacitors_ThroughHole:C_Radial_D5_L11_P2 | C205 |
| 1 | 5v_100uF(25v) | Capacitors_ThroughHole:C_Radial_D6.3_L11.2_P2.5 | C202 |
| 1 | 5v_1N5819 | Discret:D3 | D204 |
| 1 | 5v_330uF | Capacitors_ThroughHole:C_Radial_D8_L13_P3.8 | C204 |
| 1 | 5v_330uH | Inductors_NEOSID:Neosid_Inductor_SM-NE127 | L201 |
| 1 | ADJ-R1(1k) | Discret:R3 | R203 |
| 1 | ADJ_100uF(25v) | Capacitors_ThroughHole:C_Radial_D6.3_L11.2_P2.5 | C201 |
| 1 | ADJ_1N5819 | Discret:D3 | D203 |
| 1 | ADJ_330uF(25v) | Capacitors_ThroughHole:C_Radial_D8_L11.5_P3.5 | C203 |
| 1 | ADJ_330uH | Inductors_NEOSID:Neosid_Inductor_SM-NE127 | L202 |
| 1 | ADJ_POT | Potentiometers:Potentiometer_Bourns_3296W_3-8Zoll_Inline_ScrewUp | RV201 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P104 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P105 |
| 1 | Dp-1N5817-L1 | Discret:D3 | D101 |
| 1 | Dp-1N5817-L2 | Discret:D3 | D102 |
| 1 | Dp-1N5817-L3 | Discret:D3 | D103 |
| 1 | Dp-1N5817-L4 | Discret:D3 | D104 |
| 1 | Dp-1N5817-L5 | Discret:D3 | D105 |
| 1 | Dp-1N5817-L6 | Discret:D3 | D106 |
| 1 | Fuse | Fuse_Holders_and_Fuses:Fuseholder5x20_horiz_SemiClosed_Casing10x25mm | F201 |
| 1 | GLCD-100 | Discret:R3 | R103 |
| 1 | GLCD-100uF | Capacitors_ThroughHole:C_Radial_D5_L11_P2 | C101 |
| 1 | GLCD-15k | Potentiometers:Potentiometer_Bourns_3296W_3-8Zoll_Inline_ScrewUp | RV101 |
| 1 | L1-IN | mis-footprint:Pin_1x2_Paso | P301 |
| 1 | L1-RG1-2k2 | Discret:R3 | R301 |
| 1 | L1-RG2-1k2 | Discret:R3 | R304 |
| 1 | L1-Ra1-4k7 | Discret:R3 | R323 |
| 1 | L1-Ra2-1k | Discret:R3 | R325 |
| 1 | L1-Rin-120 | Discret:R3 | R305 |
| 1 | L2-IN | mis-footprint:Pin_1x2_Paso | P304 |
| 1 | L2-RG1-2k2 | Discret:R3 | R316 |
| 1 | L2-RG2-1k2 | Discret:R3 | R310 |
| 1 | L2-Ra1-4k7 | Discret:R3 | R319 |
| 1 | L2-Ra2-1k | Discret:R3 | R321 |
| 1 | L2-Rin-120 | Discret:R3 | R311 |
| 1 | L3-IN | mis-footprint:Pin_1x2_Paso | P302 |
| 1 | L3-RG1-2k2 | Discret:R3 | R302 |
| 1 | L3-RG2-1k2 | Discret:R3 | R306 |
| 1 | L3-Ra1-4k7 | Discret:R3 | R320 |
| 1 | L3-Ra2-1k | Discret:R3 | R322 |
| 1 | L3-Rin-120 | Discret:R3 | R307 |
| 1 | L4-IN | mis-footprint:Pin_1x2_Paso | P305 |
| 1 | L4-RG1-2k2 | Discret:R3 | R317 |
| 1 | L4-RG2-1k2 | Discret:R3 | R312 |
| 1 | L4-Ra1-4k7 | Discret:R3 | R328 |
| 1 | L4-Ra2-1k | Discret:R3 | R330 |
| 1 | L4-Rin-120 | Discret:R3 | R313 |
| 1 | L5-IN | mis-footprint:Pin_1x2_Paso | P303 |
| 1 | L5-RG1-2k2 | Discret:R3 | R303 |
| 1 | L5-RG2-1k2 | Discret:R3 | R308 |
| 1 | L5-Ra1-4k7 | Discret:R3 | R324 |
| 1 | L5-Ra2-1k | Discret:R3 | R326 |
| 1 | L5-Rin-120 | Discret:R3 | R309 |
| 1 | L6-IN | mis-footprint:Pin_1x2_Paso | P306 |
| 1 | L6-RG1-2k2 | Discret:R3 | R318 |
| 1 | L6-RG2-1k2 | Discret:R3 | R314 |
| 1 | L6-Ra1-4k7 | Discret:R3 | R327 |
| 1 | L6-Ra2-1k | Discret:R3 | R329 |
| 1 | L6-Rin-120 | Discret:R3 | R315 |
| 1 | LED_FUSE | LEDs:LED-3MM | D201 |
| 1 | LM2575-5 | mis-footprint:TO-220-x5-(2_3) | U202 |
| 1 | LM2575-ADJ | mis-footprint:TO-220-x5-(3_2) | U201 |
| 1 | LM324-A | Housings_DIP:DIP-14_W7.62mm_LongPads | OP301 |
| 1 | LM324-B | Housings_DIP:DIP-14_W7.62mm_LongPads | OP302 |
| 1 | LM324-C | Housings_DIP:DIP-14_W7.62mm_LongPads | OP303 |
| 1 | LPC1769-54Pines | mis-footprint:LPC1769_Stick-54-pins | LPC1769-N101 |
| 1 | MAX485 | Housings_DIP:DIP-8_W7.62mm_LongPads | U101 |
| 1 | P0.27_Pull_Up | Discret:R3 | R1 |
| 1 | P0.28_Pull_Up | Discret:R3 | R2 |
| 1 | POWER_IN_7-40[v] | Connect:bornier2 | P201 |
The 108 most common of 126 parts.
More from vecchiettidaniel/caja-negra
1- 2 layers

Similar boards
- 2 layers90 × 66 mm

SursaTensiune
CatalinSerafimescu/ZK-4KXPowerSupplyWithFan
ZK-4KX power supply enclosure with automated fan
23 parts - 2 layers114.2 × 98.8 mm

Sphygmomanometer
fedecastellaro/AD7124-4-Implementation
AD7124-4 - 24-Bit ADC, 4-Channel , Sigma-Delta - PCB and software implementation
36 parts5 - 4 layers140 × 85 mm

Gantry Hub V2 PCB
bu-gsLab/Hardware
Repository of hardware designs for Detector Lab work. All designs when possible should be done using Autodesk Inventor 2019 or earlier.
47 parts1 - 2 layers83 × 41.5 mm

- 2 layers100 × 85 mm

- 4 layers100 × 86.4 mm

- 2 layers100 × 100 mm

- 4 layers62.8 × 97.5 mm

Questions
What parts does the Modulo Lector use?
126 parts, built around the MAX485ED, LM324AD, LM2575-5.0WT and LM324BID. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Modulo Lector KiCad files?
From the vecchiettidaniel/caja-negra repository on GitHub, at the commit this page was made from: the board is proyecto-td2-2017/Esquematicos/Modulo-Lector-Ver5/Modulo-Lector.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Modulo Lector design in my own project?
Its repository states no licence, so its author keeps all rights: ask vecchiettidaniel before reusing the design.