

Pumpensteuerung
- Size
- 100 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 50
- Pads
- 143
- Tracks, vias
- 154, 53
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Sep 2023
- Updated
- 6 Jul 2026
Overview
Pumpensteuerung is an open-source printed circuit board by sebastian-toepfer, from the sebastian-toepfer/3d-models repository on GitHub. It is a 2-layer board of 100 × 85 mm with 31 parts on 50 nets, routed with 154 tracks and 53 vias.
It is built around the LM2575-5.0WT, SFR25H0001001FA500 and ECA-1CM331B, with the DRC-V-331K among its other parts. Its parts include 5 diodes, 5 connectors, 4 resistors, 4 transistors and 4 switches.
Main components
4LM2575-5.0WT
TO-220-5-40℃~+85℃ 1 1A 4V~40V 52kHz 5V 5mA Buck Buck Built-in Fixed No TO-220-5 DC-DC Converters ROHSMicrochip TechnologyDC-DC ConvertersSFR25H0001001FA500
插件,D2.5xL6.5mm-55℃~+155℃ 1kΩ 500mW Metal Film Resistor ±1% ±100ppm/℃ 插件,D2.5xL6.5mm Through Hole Resistors ROHSVishay IntertechnologyThrough Hole ResistorsECA-1CM331B
插件-40℃~+85℃ 16V 2000hrs@85℃ 330uF 595mA@10kHz 5mm 8mm ±20% 插件 Aluminum Electrolytic Capacitors - Leaded ROHSPanasonicAluminum Electrolytic Capacitors - LeadedDRC-V-331K
插件,D8.7xL12.5mm±10% 插件,D8.7xL12.5mm Power Inductors ROHSBel FusePower Inductors
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1K OHM 1/2W 1% AXIAL | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R201, R301, R401, R501 |
| 4 | 1N4007 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D201, D301, D401, D501 |
| 4 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q201, Q301, Q401, Q501 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H101, H102, H103, H104 |
| 4 | SANYOU_SRD_Form_C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K201, K301, K401, K501 |
| 4 | Screw_Terminal_01x03 | PhoenixContact:MKDSN 1,5_3-5,08 | J201, J301, J401, J501 |
| 2 | 330µF | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C101, C102 |
| 1 | 1N5822 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D101 |
| 1 | 330µH | Inductor_THT:L_Radial_D8.7mm_P5.00mm_Fastron_07HCP | L101 |
| 1 | Arduino_MKR_WAN_1310_Socket | PCM_arduino-library:Arduino_MKR_FOX_1200_Socket | MCU101 |
| 1 | LM2575-5.0BT | Package_TO_SOT_THT:TO-220-5_Vertical | U101 |
| 1 | Screw_Terminal_01x02 | PhoenixContact:MKDSN 1,5_2-5,08 | J101 |
More from sebastian-toepfer/3d-models
1- 2 layers26 × 26.5 mm

Similar boards
- 2 layers114.2 × 98.8 mm

Sphygmomanometer
fedecastellaro/AD7124-4-Implementation
AD7124-4 - 24-Bit ADC, 4-Channel , Sigma-Delta - PCB and software implementation
36 parts5 - 4 layers140 × 85 mm

Gantry Hub V2 PCB
bu-gsLab/Hardware
Repository of hardware designs for Detector Lab work. All designs when possible should be done using Autodesk Inventor 2019 or earlier.
47 parts1 - 2 layers83 × 41.5 mm

- 4 layers100 × 86.4 mm

- 2 layers100 × 100 mm

- 2 layers

- 2 layers44.5 × 46.9 mm

OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
31 parts2.1k - 2 layers65 × 30 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
31 parts1kGPL-3.0
Questions
How big is the Pumpensteuerung PCB?
It measures 100 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pumpensteuerung use?
31 parts, built around the LM2575-5.0WT, SFR25H0001001FA500, ECA-1CM331B and DRC-V-331K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pumpensteuerung KiCad files?
From the sebastian-toepfer/3d-models repository on GitHub, at the commit this page was made from: the board is projects/garten/bewaesserung/kicad/pumpensteuerung/pumpensteuerung.kicad_pcb and its schematic projects/devboards/attiny13a/kicad/attiny13a/attiny13a.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pumpensteuerung design in my own project?
Its repository states no licence, so its author keeps all rights: ask sebastian-toepfer before reusing the design.