2 layers120 × 98 mm
BioAmp v1.1.0
prototipado/bioamp
BioAmp is an opensource project of a multichannel biopotential adquisition system for EEG, EMG, EOG and EOG signals.
139 parts16
2 layers83 × 41.5 mm
TP6 de TDII
- Size
- 83 × 41.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 17
- Pads
- 170
- Tracks, vias
- 325, 20
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 14 Sep 2015
- Updated
- 28 Sep 2015
Overview
TP6 is an open-source printed circuit board by frand08, from the frand08/TP6-TDII repository on GitHub. It is a 2-layer board of 83 × 41.5 mm with 30 parts on 17 nets, routed with 325 tracks and 20 vias.
It is built around the LPC1769FBD100 and LM2575-5.0WT. Its parts include 12 capacitors, 6 resistors, 2 ICs, 1 diode and 1 connector. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
2README
README.mdTP6-TDII
Realización del TP6 (placa en kicad)
Integrantes: Dominguez, Francisco Sivinian, Juan
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | SM0805 | R3, R4, R5, R6 |
| 3 | 100n | c_0805 | C4, C5, C6 |
| 3 | 10uF | C1V7 | C3, C10, C11 |
| 2 | 100nF | c_0805 | C9, C12 |
| 2 | 18p | c_0805 | C7, C8 |
| 2 | 1k | SM0805 | R1, R2 |
| 2 | FILTER | R3 | FB1, FB2 |
| 1 | 100uF | C1V7 | C1 |
| 1 | 12MHz | crystal_FA238-TSX3225 | X1 |
| 1 | 12V | PIN_ARRAY_2X1 | P12 |
| 1 | 1N5819 | D3 | D1 |
| 1 | 330uF | C1V7 | C2 |
| 1 | 330uH | R3 | L1 |
| 1 | CONN_2 | PIN_ARRAY_2X1 | PDAC1 |
| 1 | CONN_5 | PIN_ARRAY_5x1 | PJTAG1 |
| 1 | LM2575-5.0 | TO263-5 | U5 |
| 1 | LPC1769FBD100 | TQFP_100 | ULPC1 |
| 1 | NCP1117ST33T3G | SOT223 | U3.3 |
| 1 | POT | POT_CMS | RV1 |
Similar boards
- 2 layers25.5 × 62.1 mm
- 2 layers120 × 90 mm
- 4 layers100 × 100 mm
- 2 layers114.2 × 98.8 mm
Sphygmomanometer
fedecastellaro/AD7124-4-Implementation
AD7124-4 - 24-Bit ADC, 4-Channel , Sigma-Delta - PCB and software implementation
36 parts5 - 4 layers140 × 85 mm
Gantry Hub V2 PCB
bu-gsLab/Hardware
Repository of hardware designs for Detector Lab work. All designs when possible should be done using Autodesk Inventor 2019 or earlier.
47 parts1 - 2 layers100 × 85 mm
- 4 layers100 × 86.4 mm
Questions
How big is the TP6 PCB?
It measures 83 × 41.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TP6 use?
30 parts, built around the LPC1769FBD100 and LM2575-5.0WT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TP6 KiCad files?
From the frand08/TP6-TDII repository on GitHub, at the commit this page was made from: the board is PCBTP6_TDII/TP6.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TP6 design in my own project?
Its repository states no licence, so its author keeps all rights: ask frand08 before reusing the design.