2 layers120 × 33 mm
BioAmp v1.1.0 DB
prototipado/bioamp
BioAmp is an opensource project of a multichannel biopotential adquisition system for EEG, EMG, EOG and EOG signals.
23 parts16
2 layers120 × 98 mm
BioAmp v1.1.0
prototipado/bioamp16BioAmp is an opensource project of a multichannel biopotential adquisition system for EEG, EMG, EOG and EOG signals.
- Size
- 120 × 98 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 139
- Nets
- 189
- Pads
- 564
- Tracks, vias
- 1,380, 209
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 14 May 2017
- Updated
- 11 Apr 2022
Overview
BioAmp v1.1.0 is an open-source printed circuit board by prototipado, from the prototipado/bioamp repository on GitHub. It is a 2-layer board of 120 × 98 mm with 139 parts on 189 nets, routed with 1,380 tracks and 209 vias.
It is built around the LPC1769FBD100, FT230XS-R and TPD4E1B06DCK, with the HCPL062N, ADUM6201CRWZ and TPD2E001DRLR among its other parts. Its parts include 37 capacitors, 25 resistors, 22 connectors, 10 ICs and 4 inductors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
8
LPC1769FBD100
LQFP-100(14x14)LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSNXP SemiconductorsMicrocontrollers (MCU/MPU/SOC)
FT230XS-R
SSOP-16-150mil-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART SSOP-16-150mil USB Converters ROHSFTDIUSB Converters
TPD4E1B06DCK
SC-70-6-40℃~+125℃ 0.7pF 14.5V 3A@8/20us 45W@8/20us 5.5V 500pA 7V Bidirectional ESD Four channels IEC 61000-4-2、IEC 61000-4-5 SC-70-6 ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
HCPL062N
SO-8-40℃~+85℃ 1.75V 10Mbps 15mA 2 2.5kV 2.7V~3.3V 25kV/us 45mW 5V 5mA 75ns 90ns DC SO-8 Logic Output Optoisolators ROHSonsemiLogic Output Optoisolators
ADUM6201CRWZ
SOIC-16-300mil-40℃~+105℃ 1 1 25Mbps 5000 SOIC-16-300mil Digital Isolators (with Power) ROHSAnalog DevicesDigital Isolators (With Power)
TPD2E001DRLR
SOT-553-5-40℃~+85℃ 1.5pF 11V 1nA 2 5.5V IEC 61000-4-2 TVS Unidirectional SOT-553-5 ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)PLB1G020004
-Circular Connectors & Cable ConnectorsITT CANNONPLB1G020010
-Circular Connectors & Cable ConnectorsITT CANNON
Parts
139| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | biopotenciales:C_0603 | C4, C6, C8, C10, C18, C22, C32, C33, C34, C35, C36, C37 |
| 8 | Jack_Touch-Proof | biopotenciales:Jack_TouchProof_1.5mm | J1, J2, J3, J4, J6, J7, J8, J9 |
| 7 | 1k | biopotenciales:R_0603 | R1, R4, R5, R18, R19, R20, R21 |
| 7 | 560 | biopotenciales:R_0603 | R8, R9, R16, R22, R23, R24, R25 |
| 5 | 10nF | biopotenciales:C_0603 | C3, C5, C7, C9, C13 |
| 5 | 1uF | biopotenciales:C_0603 | C21, C23, C24, C28, C31 |
| 4 | 0.1uF | biopotenciales:C_0603 | C11, C16, C25, C30 |
| 4 | 10k | biopotenciales:R_0603 | R2, R7, R11, R12 |
| 4 | 10uF | biopotenciales:C_0603 | C12, C17, C19, C26 |
| 4 | INDUCTOR_SMALL | biopotenciales:FER-0805 | L1, L2, L3, L4 |
| 4 | MountingHole_3-5mm | Mounting_Holes:MountingHole_3-5mm | MH1, MH2, MH3, MH4 |
| 3 | CAY16-F4_R-ARRAY | biopotenciales:r_cay16-4 | RN1, RN2, RN3 |
| 3 | CKCL44X7R1H | biopotenciales:Cap_Array_4 | CN1, CN2, CN3 |
| 3 | TPD4E1B06 | biopotenciales:TSOP-6_2x1.25mm_Pitch0.65mm | U1, U2, U3 |
| 2 | 18pF | biopotenciales:C_0603 | C1, C2 |
| 2 | 27 | biopotenciales:R_0603 | R13, R14 |
| 2 | 330k | biopotenciales:R_0603 | R6, R10 |
| 2 | 47pF | biopotenciales:C_0603 | C14, C15 |
| 2 | CONN_01X03 | biopotenciales:Pin_Header_Straight_1x03 | P3, P5 |
| 2 | CONN_01X05 | biopotenciales:Pin_Header_Straight_1x05 | P4, P6 |
| 2 | HCPL062N | biopotenciales:SOIC-8_3.9x4.9mm_Pitch1.27mm | U9, U10 |
| 2 | JUMPER | biopotenciales:R_0603 | SRB1, SRB2 |
| 2 | Q_NMOS_SGD | biopotenciales:sot23 | Q1, Q2 |
| 1 | 0R | biopotenciales:R_0603 | R15 |
| 1 | 100uF | biopotenciales:C_1206 | C27 |
| 1 | 12MHz | biopotenciales:XTAL_AM3B | Y1 |
| 1 | 12k | biopotenciales:R_0603 | R3 |
| 1 | 1M | biopotenciales:R_0603 | R17 |
| 1 | 1nF | biopotenciales:C_0603 | C29 |
| 1 | 4.7uF | biopotenciales:c_tant_A | C20 |
| 1 | ADS1299 | LQFP-64_10x10mm_Pitch0.5mm | U8 |
| 1 | ADUM6201CRWZ | biopotenciales:SOIC-16_7.5x10.3mm_Pitch1.27mm | U5 |
| 1 | CONN_01X10 | Pin_Headers:Pin_Header_Straight_1x10 | P1 |
| 1 | D_Schottky | biopotenciales:diode_0603 | D2 |
| 1 | FT230XS | biopotenciales:SSOP-16_3.9x4.9mm_Pitch0.635mm | U7 |
| 1 | JTAG | biopotenciales:Pin_Header_Straight_1x08 | P2 |
| 1 | Jack_Touch-Proof | Jack_TouchProof_1.5mm | J5 |
| 1 | LED | biopotenciales:LED_0603 | D4 |
| 1 | LOGO | Logos:uner_logo_s | G*** |
| 1 | LOGO | Logos:dibujo_logo_s | G*** |
| 1 | LOGO | Logos:fi_logo_s | G*** |
| 1 | LP5907_3.3V | biopotenciales:sot23-5 | VR1 |
| 1 | LPC1769FBD100 | LQFP-100_14x14mm_Pitch0.5mm | U4 |
| 1 | Led_bicolor | biopotenciales:Led_bicolor | D1 |
| 1 | Net_Tie | biopotenciales:Net_tie | NT1 |
| 1 | PLB1G020002 | biopotenciales:PLB1G020002 | J10 |
| 1 | PLB1G020004 | biopotenciales:PLB1G020004 | J12 |
| 1 | PLB1G020010 | biopotenciales:PLB1G020010 | J11 |
| 1 | SW_PUSH | biopotenciales:SW_Tactile_SPST_Angled | S1 |
| 1 | TPD2E001DRLR | biopotenciales:5-Flat_Leads_1.2x1.6mmPitch_0.5mm | U6 |
| 1 | USB_B | biopotenciales:USB_B-smd | J13 |
The 119 most common of 139 parts.
More from prototipado/bioamp
1Similar boards
- 2 layers25.5 × 62.1 mm
- 2 layers120 × 90 mm
- 2 layers83 × 41.5 mm
- 4 layers100 × 100 mm
- 4 layers233 × 230.5 mm
- 4 layers44.5 × 50.6 mm
- 4 layers63.2 × 70.5 mm
- 8 layers65.6 × 19.6 mm
Armory
ahmad-ih/USB-Armory
USB armory | https://inversepath.com/usbarmory Copyright (c) F-Secure Corporation
184 parts
Questions
How big is the BioAmp v1.1.0 PCB?
It measures 120 × 98 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BioAmp v1.1.0 use?
139 parts, built around the LPC1769FBD100, FT230XS-R, TPD4E1B06DCK and HCPL062N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BioAmp v1.1.0 KiCad files?
From the prototipado/bioamp repository on GitHub, at the commit this page was made from: the board is Hardware/BioAmp_v1.1.0/BioAmp_v1.1.0.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BioAmp v1.1.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask prototipado before reusing the design.