2 layers160 × 100 mm
CodyComputer
fjmilens3/cody-computer
Design files and source code for the Cody Computer.
59 parts64GPL-3.0
4 layers140 × 60 mm
Artlogger tm4c1294 v2
vaaackies/ARTlogger-PCBThis is the PCB design of the ARTlogger, a data logging device for the ART16 racecar.
- Size
- 140 × 60 mm
- Copper layers
- 4
- Thickness
- 1.5 mm
- Parts
- 132
- Nets
- 152
- Pads
- 454
- Tracks, vias
- 1,258, 166
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 Jan 2018
- Updated
- 3 Jan 2018
Overview
Artlogger tm4c1294 v2 is an open-source printed circuit board by vaaackies, from the vaaackies/ARTlogger-PCB repository on GitHub. It is a 4-layer board of 140 × 60 mm with 132 parts on 152 nets, routed with 1,258 tracks and 166 vias.
It is built around the MCP2551-I/SN and LM2937ET-3.3. Its parts include 54 resistors, 37 capacitors, 24 diodes, 9 ICs and 2 crystals.
Main components
2
MCP2551-I/SN
SOIC-8-40℃~+85℃ 1Mbps 365uA 4.5V~5.5V 75mA CAN Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
LM2937ET-3.3
TO-220-3-40℃~+125℃ 1 10mA 1V@(500mA) 26V 3.3V 500mA Fixed Over Current Protection、Thermal Shutdown、ESD Protection、Enable、Short Circuit Protection、Under Voltage Lockout (UVLO)、Over Voltage Protection Positive TO-220-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdARTlogger-PCB
This is the PCB design of the ARTlogger, a data logging device for the ART16 racecar.
This is the PCB design for the ARTlogger project, a project that was developed in order to produce a data-logger for racing purpose, during my time in Aristotle Racing Team (ART), the Formula Student team of Aristotle University of Thessaloniki, Greece.
This datalogger was used in the ART16, the 5th race car produced by the team.
The PCB was designed using KiCAD, an open source PCB design tool.
Parts
132| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | TVS | Diodes_SMD:SOD-523 | D1, D2, D3, D4, D5, D6, D11, D12, D13, D14, D15, D16, D17, D18, D27, D28 +2 |
| 17 | 100 | Resistors_SMD:R_0603 | R3, R4, R8, R12, R13, R16, R18, R24, R27, R29, R31, R35, R37, R41, R44, R50 +1 |
| 16 | 100p | Capacitors_SMD:C_0603 | C1, C2, C4, C5, C6, C7, C8, C9, C20, C25, C26, C29, C30, C31, C34, C36 |
| 16 | 150 | Resistors_SMD:R_0603 | R1, R2, R6, R7, R10, R11, R14, R17, R22, R26, R28, R30, R34, R36, R40, R43 |
| 12 | 0.1u | Capacitors_SMD:C_0603 | C10, C12, C14, C15, C18, C21, C24, C27, C28, C33, C37, C40 |
| 7 | 10k | Resistors_SMD:R_0603 | R5, R25, R42, R46, R48, R49, R51 |
| 7 | 1k | Resistors_SMD:R_0603 | R15, R21, R32, R45, R47, R52, R55 |
| 6 | Led_Small | LEDs:LED-3MM | D7, D10, D19, D20, D21, D29 |
| 4 | 12p | Capacitors_SMD:C_0603 | C11, C13, C17, C23 |
| 2 | 120 | Resistors_SMD:R_0603 | R38, R39 |
| 2 | 560p | Capacitors_SMD:C_0603 | C32, C35 |
| 1 | 10u | Capacitors_SMD:C_1206 | C16 |
| 1 | 1M | Resistors_SMD:R_0603 | R19 |
| 1 | 1u | Capacitors_SMD:C_0805 | C19 |
| 1 | 2.2u | Capacitors_SMD:C_0805 | C22 |
| 1 | 25MHz | Aleph-IC:NX5032GA | Y2 |
| 1 | 26POS_CONN | Socket_Strips:Socket_Strip_Straight_2x13 | U2 |
| 1 | 2k | Resistors_SMD:R_0603 | R23 |
| 1 | 32.768kHz | Aleph-IC:CMR200T | Y1 |
| 1 | 4.7k | Resistors_SMD:R_0603 | R53 |
| 1 | 51 | Resistors_SMD:R_0603 | R20 |
| 1 | 510 | Resistors_SMD:R_0603 | R33 |
| 1 | CORTEX_DEBUG | Connect:IDC_Header_Straight_10pins | U8 |
| 1 | DEBUG_RX/TX | Socket_Strips:Socket_Strip_Straight_1x02 | P1 |
| 1 | LM2937ET-3.3 | TO_SOT_Packages_SMD:SOT-223 | U3 |
| 1 | MCP2551-I/SN | Power_Integrations:SO-8 | U5 |
| 1 | MPU9150-Breakout | Socket_Strips:Socket_Strip_Straight_1x11 | U11 |
| 1 | REF3230 | TO_SOT_Packages_SMD:SOT-23-6 | U4 |
| 1 | SW_PUSH | Buttons_Switches_ThroughHole:SW_PUSH_SMALL | SW1 |
| 1 | TM4C1294 | Housings_QFP:TQFP-128_14x14mm_Pitch0.4mm | U1 |
| 1 | ULT_GPS | Socket_Strips:Socket_Strip_Straight_1x09 | U7 |
| 1 | microSD | Socket_Strips:Socket_Strip_Straight_1x07 | U6 |
The 128 most common of 132 parts.
Similar boards
- 2 layers68 × 31 mm
- 4 layers83.4 × 68.5 mm
Ms3
pggood/Megasquirt-MS3-Bootloader
Bootloader to initialise MS3 if you need to replace the HCS12
82 parts7 - 2 layers109 × 95 mm
- 2 layers140 × 178.7 mm
- 2 layers256.5 × 172.9 mm
- 2 layers239.3 × 121.3 mm
- 2 layers35.1 × 62.7 mm
EMO SN65 OBD
darshanram008/EMO_OBD_tool
On board diagnostic tool for Battery management system
116 parts1
Questions
How big is the Artlogger tm4c1294 v2 PCB?
It measures 140 × 60 mm and has 4 copper layers, 1.5 mm thick.
What parts does the Artlogger tm4c1294 v2 use?
132 parts, built around the MCP2551-I/SN and LM2937ET-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Artlogger tm4c1294 v2 KiCad files?
From the vaaackies/ARTlogger-PCB repository on GitHub, at the commit this page was made from: the board is artlogger_tm4c1294_v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Artlogger tm4c1294 v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask vaaackies before reusing the design.