
Canary
offgridevices/offgrid-hardware
Open hardware from OffGrid Devices. One folder per board. CERN-OHL-S.

ATmega328P Sensor Shield is an open-source printed circuit board by v1ct0r3x, from the v1ct0r3x/ATmega328P-Sensor-Shield repository on GitHub. It is a 2-layer board of 35 × 35 mm with 26 parts on 37 nets, routed with 338 tracks and 13 vias.
It is built around the ATMEGA328P-AU, SHT30-DIS and AMS1117-3.3, with the SCD41-D-R2 among its other parts. Its parts include 10 capacitors, 6 resistors, 4 ICs, 3 connectors and 1 diode. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric | C5, C6, C7, C8, C9, C10 |
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 16 MHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | x1 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | SCD41-D-R2 | Sensor:Sensirion_SCD4x-1EP_10.1x10.1mm_P1.25mm_EP4.8x4.8mm | U4 |
| 1 | SHT30-DIS | Sensor_Humidity:Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mm | U3 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Plug_Molex_105444 | P1 |

offgridevices/offgrid-hardware
Open hardware from OffGrid Devices. One folder per board. CERN-OHL-S.

CommanderRedYT/ws2812-clock
A simple pcb clock using ws2812 in 7-segment form

lucasnoce/IC-LevelSensor_v2
Water level sensor with NBIoT data transmission


sriram96596/ESP30-WROOM-32-with-SHT30-sensor_PCBDesign
ESP30-WROOM-32-with-SHT30-sensor_PCBDesign

JonaWe/ummon
ummon (from German Umgebungsmonitor, "environment monitor") is an ESP32-C6 based environmental sensor board with USB-C power.

akuker/adbuino
Arduino-based USB keyboard and Mouse to ADB adapter. Allows USB keyboards and mice to be used with vintage Macintosh computers.

djtersteegc/smartportsd
Various PCB and case designs of the SmartPortSD hard disk emulator for Apple II computers.
It measures 35 × 35 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the ATMEGA328P-AU, SHT30-DIS, AMS1117-3.3 and SCD41-D-R2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the v1ct0r3x/ATmega328P-Sensor-Shield repository on GitHub, at the commit this page was made from: the board is atmega328p-sensor-shield.kicad_pcb and its schematic atmega328p-sensor-shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask v1ct0r3x before reusing the design.