

Kaika clock main
kaika_clock_pcb
- Size
- 128 × 32 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 35
- Pads
- 206
- Tracks, vias
- 636, 115
- Pours
- 145
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Dec 2020
- Updated
- 30 Jan 2021
Overview
Kaika clock main is an open-source printed circuit board by lindianfeng, from the lindianfeng/kaika_clock_pcb repository on GitHub. It is a 2-layer board of 128 × 32 mm with 58 parts on 35 nets, routed with 636 tracks and 115 vias.
It is built around the DS18B20, SHT30-DIS and AMS1117-3.3, with the DS3231MZ/V+, TC-1102N-C-QL-B and BAT54C among its other parts. Its parts include 20 resistors, 15 capacitors, 5 ICs, 3 connectors and 3 switches. It belongs with the lEDs and displays boards and the STM32 boards of this library.
Main components
6DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature SensorsSHT30-DIS
DFN-8DFN-8 Temperature and Humidity Sensor ROHSSensirionUncategorisedAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDS3231MZ/V+
SOIC-8-40℃~+85℃ 2.3V~5.5V Built-in I2C Temperature compensation、Backup power management and battery charging、Alarm function、Locking and tamper-proof、Periodic interrupt output SOIC-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time ClocksTC-1102N-C-QL-B
弯插,6x6mm-30℃~+85℃ 12V 2.6N 300,000 Cycles 50mA 6.5mm 6mm 6mm Black No PC Pin Right Angle Round Button SPST With Bracket 弯插,6x6mm Tactile Switches ROHSXKB ConnectionTactile SwitchesBAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky Diodes
README
README.mdkaika_clock_pcb
kaika_clock_pcb
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C6, C7, C8, C9, C10, C11, C14, C18 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R6, R9 |
| 4 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R7, R22, R23 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 5.1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R16, R17 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12 |
| 2 | 20p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13 |
| 2 | 33 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19 |
| 2 | 47uf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C15 |
| 2 | Jumper_NC_Dual | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm | JP2, JP3 |
| 2 | TC-1102N-C-QL-B | Kaka-footprints:SW-TH_TC-1102N-C-QL-B | SW1, SW2 |
| 1 | 1.5K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 200 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 22K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 8MHZ | Crystal:Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | Battery_Cell | Kaka-footprints:BAT-TH_BS-2-1 | BT1 |
| 1 | Buzzer | Kaka-footprints:BUZZER-TH_BD12.0-P6.50-D0.6-FD | BZ1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | D1 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | DS18B20 | Package_TO_SOT_THT:TO-92_Inline | U5 |
| 1 | DS3231MZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | KEY-SMD_2P-L6.2-W3.6-LS8.0 | Kaka-footprints:SW-SMD_L6.2-W3.6-LS8.0 | SW4 |
| 1 | Q_NPN_BEC | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | RES-GL7516 | Kaka-footprints:RES-TH_L7.0-W5.9-P5.00-D0.5 | R8 |
| 1 | SHT30-DIS | Sensor_Humidity:Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mm | U4 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | USB-C-SMD_TYPE-C16PIN_C168688 | Kaka-footprints:USB-C-SMD_TYPE-C-USB-4_C168688 | P1 |
More from lindianfeng/kaika_clock_pcb
1- 2 layers128 × 32 mm

Similar boards
- 4 layers50.8 × 22.9 mm

Bald Sense Wing v3
baldengineer/BaldSENSE_Sensor_Feather_Wing
A temperature, humidity, light, and sound sensor wing
63 parts9MIT - 2 layers88.9 × 61.6 mm

- 4 layers68 × 100 mm

Pocket caddy
bkuhn4/golf-gps
The Pocket Caddy hardware is built around the ESP32-C3 microcontroller and includes the following components:
90 parts - 2 layers341.8 × 158.5 mm

Ws2812-clock
CommanderRedYT/ws2812-clock
A simple pcb clock using ws2812 in 7-segment form
533 parts2GPL-3.0 - 4 layers92 × 50.4 mm

LevelSensor v2.0
lucasnoce/IC-LevelSensor_v2
Water level sensor with NBIoT data transmission
125 parts1 - 2 layers24 × 77.8 mm

ESP32 with sensor
sriram96596/ESP30-WROOM-32-with-SHT30-sensor_PCBDesign
ESP30-WROOM-32-with-SHT30-sensor_PCBDesign
21 parts - 2 layers35 × 35 mm

- 4 layers70 × 69.8 mm

Questions
How big is the Kaika clock main PCB?
It measures 128 × 32 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kaika clock main use?
58 parts, built around the DS18B20, SHT30-DIS, AMS1117-3.3 and DS3231MZ/V+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kaika clock main KiCad files?
From the lindianfeng/kaika_clock_pcb repository on GitHub, at the commit this page was made from: the board is main/kaika_clock_main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kaika clock main design in my own project?
Its repository states no licence, so its author keeps all rights: ask lindianfeng before reusing the design.