Skip to the content
4 layers20 × 20 mmPeople Staff Neo, the printed circuit board in 3D

Minibadges for SAINTCON 2024

Size
20 × 20 mm
Copper layers
4
Thickness
1.6 mm
Parts
84
Nets
99
Pads
350
Tracks, vias
434, 164
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
21 Jul 2024
Updated
30 Jul 2024

Overview

People Staff Neo is an open-source printed circuit board by utahsaint-org, from the utahsaint-org/MiniBadges2024 repository on GitHub. It is a 4-layer board of 20 × 20 mm with 84 parts on 99 nets, routed with 434 tracks and 164 vias.

It is built around the ATTINY1614-SSN. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

MiniBadges2024

Minibadges for SAINTCON 2024

Parts

84
QtyValueFootprintReferences
80~WS2812B NeoPixels:WS2812B_1010N1, N2, N10, N11, N12, N13, N14, N15, N16, N17, N18, N19, N20, N21, N22, N23 +64
1ATtiny1614-SSPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmATTINY1614
1CCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder10uF
1MiniBadge_FullMinibadge:MiniBadge_FullMB1
1R_USResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder4.7kΩ

More from utahsaint-org/MiniBadges2024

12
  • 2 layers258 × 126 mmVolunteer Topper V2, the printed circuit board in 3D

    Volunteer Topper V2

    utahsaint-org/MiniBadges2024

    Minibadges for SAINTCON 2024

    19 parts
  • 2 layers89.4 × 20 mmHeadband-2024, the printed circuit board in 3D

    Headband-2024

    utahsaint-org/MiniBadges2024

    Minibadges for SAINTCON 2024

    8 parts
  • 2 layers79.6 × 112.3 mm2023-KidsNight, the printed circuit board in 3D

    2023-KidsNight

    utahsaint-org/MiniBadges2024

    Minibadges for SAINTCON 2024

    8 parts
  • 2 layers26.5 × 46 mmJawaBadge-2024, the printed circuit board in 3D

    JawaBadge-2024

    utahsaint-org/MiniBadges2024

    Minibadges for SAINTCON 2024

    7 parts
  • 2 layers20 × 20 mmBlue Team v1, the printed circuit board in 3D

    Blue Team v1

    utahsaint-org/MiniBadges2024

    Minibadges for SAINTCON 2024

    6 parts
  • 2 layers20 × 20 mmBlue Team v1, the printed circuit board in 3D

    Blue Team v1

    utahsaint-org/MiniBadges2024

    Minibadges for SAINTCON 2024

    6 parts
  • 2 layers17.8 × 20.3 mmAttinyBoard, the printed circuit board in 3D

    AttinyBoard

    utahsaint-org/MiniBadges2024

    Minibadges for SAINTCON 2024

    5 parts
  • 2 layers20 × 20 mmHC24, the printed circuit board in 3D

    HC24

    utahsaint-org/MiniBadges2024

    Minibadges for SAINTCON 2024

    5 parts
  • 2 layers20 × 20 mmKeep Community-2024, the printed circuit board in 3D

    Keep Community-2024

    utahsaint-org/MiniBadges2024

    Minibadges for SAINTCON 2024

    4 parts
  • 2 layers20 × 20 mmESC Badge, the printed circuit board in 3D

    ESC Badge

    utahsaint-org/MiniBadges2024

    Minibadges for SAINTCON 2024

    3 parts
  • 2 layers89.4 × 20 mmHeadband-2024, the printed circuit board in 3D

    Headband-2024

    utahsaint-org/MiniBadges2024

    Minibadges for SAINTCON 2024

    2 parts

Similar boards

  • 4 layers67 × 98 mmSJ-201-R6, the printed circuit board in 3D

    SJ-201-R6

    MycroftAI/hardware-mycroft-mark-II

    Mycroft's Mark II Rpi mechanical, electrical and industrial designs

    235 parts113
  • 2 layers23.7 × 25.5 mmMalenki, the printed circuit board in 3D

    Malenki

    MarkR42/malenki-esc

    A small electronic speed controller for e.g. tiny fighting robots or other rc models

    30 parts7
  • 2 layers157.5 × 81.3 mmCollectorPanel, the printed circuit board in 3D

    CollectorPanel

    tjhiker/Personal-MiniBadges-2025

    My Personal MiniBadges used at SAINTCON 2025

    25 parts7
  • 2 layers179.1 × 67.9 mmControl Board, the printed circuit board in 3D

    Control Board

    Alan-JH/PCB-Heater

    Reflow hotplate PCB design

    77 parts6
  • 2 layers41 × 41 mmRid, the printed circuit board in 3D

    Rid

    swr06/LED-Wearable

    LED Wearable that displays patterns, based on ATTiny1614

    12 parts5MIT
  • 2 layers33 × 23.9 mmESPTiny1614, the printed circuit board in 3D

    ESPTiny1614

    tomtor/ESPTiny

    KiCad ATtiny84/x14/x02 (SMD) and ESP-01 (ESP 8266) PCB boards

    24 parts4GPL-3.0
  • 2 layers30.5 × 15.2 mmAvr attiny1614-mini, the printed circuit board in 3D

    Avr attiny1614-mini

    vladbelous/avr-attiny1614-mini

    AVR attiny1614 (tinyAVR 1-series) mini board

    26 parts4
  • 2 layers53.5 × 26.5 mmSB Pixel Count, the printed circuit board in 3D

    SB Pixel Count

    computergeek1507/SB_Pixel_Count

    SB Pixel Counter

    23 parts3

Questions

How big is the People Staff Neo PCB?

It measures 20 × 20 mm and has 4 copper layers, 1.6 mm thick.

What parts does the People Staff Neo use?

84 parts, built around the ATTINY1614-SSN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the People Staff Neo KiCad files?

From the utahsaint-org/MiniBadges2024 repository on GitHub, at the commit this page was made from: the board is People-Staff-Neo/People-Staff-Neo.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the People Staff Neo design in my own project?

Its repository states no licence, so its author keeps all rights: ask utahsaint-org before reusing the design.