

FT232RQ
Candy size USB to UART bridge.
- Size
- 24 × 17 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 33
- Pads
- 83
- Tracks, vias
- 136, 13
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Nov 2020
- Updated
- 18 Feb 2021
Overview
FT232RQ is an open-source printed circuit board by upsidedownlabs, from the upsidedownlabs/Candy-UART repository on GitHub. It is a 2-layer board of 24 × 17 mm with 13 parts on 33 nets, routed with 136 tracks and 13 vias.
It is built around the FT232RQ. Its parts include 5 capacitors, 2 ICs, 2 connectors, 1 resistor and 1 diode. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdCandy UART
Candy size USB to UART bridge.
CH340C Candy
| Front | Back |
|---|---|
![]() | ![]() |
| Dimensions | Schematic |
|---|---|
24.00 x 17.00 mm![]() | ![]() |
FT232RQ Candy
| Front | Back |
|---|---|
![]() | ![]() |
| Dimensions | Schematic |
|---|---|
24.00 x 17.00 mm![]() | ![]() |
License
Hardware
CERN Open Hardware License Version 2 - Strongly Reciprocal (CERN-OHL-S-2.0).
Software
MIT open source license.
Documentation:

This work is licensed under a Creative Commons Attribution 4.0 International License.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C5 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | Conn_01x06_Male | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | FT232RQ | udlabs:FT232RQ | IC1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LOGO | udlabs:udlabs_18.1x3.8 | G*** |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |
| 1 | TLV74033PDBVR | udlabs:TLV74033PDBVR | IC2 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | P1 |
More from upsidedownlabs/Candy-UART
1- 2 layers24 × 17 mm

Similar boards
- 2 layers35 × 38.4 mm

Handgelenk
Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...
61 parts233 - 2 layers169.3 × 128 mm

PSU PCB
ThomasVDD/SmartSupply
SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.
134 parts96 - 2 layers62.2 × 55.1 mm

GBProg2
ladecadence/GBShooper
Open source hardware GameBoy™ FlashCart Reader/Programmer
29 parts8CC-BY-SA-4.0 - 10 layers160 × 100 mm

Cirradio devboard
mangobanaani/cirradio
Tactical UHF FHSS mesh radio: Zynq-7045 + AD9361, SystemVerilog RTL, C++20 comms stack, AES-256 PKCS#11 crypto
316 parts8MIT - 2 layers180 × 70 mm

Bms
mandraga/SombreroBms
A battery management system (BMS) for small vehicles mainly 36V and 48V (golf carts & quads).
225 parts4 - 4 layers61.2 × 54.5 mm

CentralCommand
AlanFord/CentralCommand
Central Command pcb for the Contextual Electronics class
69 parts - 2 layers254 × 134.1 mm

S100 B1FU
CatspersCoffee/S100-Boards
S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.
164 parts - 2 layers60 × 60 mm

MRS Module Host
ctu-mrs/mrs_hw_modules
Modules for MRS drone distribution boards to add a specific funtionality the distribution boards do not provide.
13 partsMIT
Questions
How big is the FT232RQ PCB?
It measures 24 × 17 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FT232RQ use?
13 parts, built around the FT232RQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FT232RQ KiCad files?
From the upsidedownlabs/Candy-UART repository on GitHub, at the commit this page was made from: the board is FT232RQ/FT232RQ.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FT232RQ design in my own project?
Its repository states no licence, so its author keeps all rights: ask upsidedownlabs before reusing the design.







