
Handgelenk
Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...
FTDI
USB to serial UART Interface
The FT232RQ is an uncategorised made by FTDI in a PQFN32 package with 33 pins. USB to serial UART Interface.
PCBKit's library has its KiCad symbol (Analog & Interface:FT232RQ, from CERN's library) and its footprint (ICs And Semiconductors SMD:PQFN50P500X500X100-33N-S330, from CERN's library), ready for a KiCad board. 32 open-source boards in 26 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VCCIO | Power in |
| 2 | RXD | Input |
| 3 | RI | Input |
| 4 | GND | Power in |
| 5 | NC | Passive |
| 6 | DSR | Input |
| 7 | DCD | Input |
| 8 | CTS | Input |
| 9 | CBUS4 | Input/output |
| 10 | CBUS2 | Input/output |
| 11 | CBUS3 | Input/output |
| 12 | NC | Passive |
| 13 | NC | Passive |
| 14 | USBDP | Input/output |
| 15 | USBDM | Input/output |
| 16 | 3V3OUT | Output |
| 17 | GND | Power in |
| 18 | RESET | Input |
| 19 | VCC | Power in |
| 20 | GND | Power in |
| 21 | CBUS1 | Input/output |
| 22 | CBUS0 | Input/output |
| 23 | NC | Passive |
| 24 | AGND | Power in |
| 25 | NC | Passive |
| 26 | TEST | Input |
| 27 | OSCI | Input |
| 28 | OSCO | Output |
| 29 | NC | Passive |
| 30 | TXD | Output |
| 31 | DTR | Output |
| 32 | RTS | Output |
| 33 | EP | Power in |

Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...

ThomasVDD/SmartSupply
SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.

ladecadence/GBShooper
Open source hardware GameBoy™ FlashCart Reader/Programmer

mangobanaani/cirradio
Tactical UHF FHSS mesh radio: Zynq-7045 + AD9361, SystemVerilog RTL, C++20 comms stack, AES-256 PKCS#11 crypto

mandraga/SombreroBms
A battery management system (BMS) for small vehicles mainly 36V and 48V (golf carts & quads).

AlanFord/CentralCommand
Central Command pcb for the Contextual Electronics class

CatspersCoffee/S100-Boards
S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.

ctu-mrs/mrs_hw_modules
Modules for MRS drone distribution boards to add a specific funtionality the distribution boards do not provide.
Yes. The symbol is Analog & Interface:FT232RQ and the footprint ICs And Semiconductors SMD:PQFN50P500X500X100-33N-S330, both drawn on this page. PCBKit places them on a board for you when you design with it.
PQFN32, with 33 pins. Its footprint is drawn on this page.
32 boards in 26 repositories on GitHub; the most starred are listed on this page, with their KiCad files.