
MRS Module Template Large
ctu-mrs/mrs_hw_modules
Modules for MRS drone distribution boards to add a specific funtionality the distribution boards do not provide.

Modules for MRS drone distribution boards to add a specific funtionality the distribution boards do not provide.
MRS Module Host is an open-source printed circuit board by ctu-mrs, from the ctu-mrs/mrs_hw_modules repository on GitHub, published under the MIT licence. It is a 2-layer board of 60 × 60 mm with 13 parts on 30 nets, routed with 103 tracks and 113 vias.
It is built around the FT232RQ. Its parts include 3 capacitors, 2 resistors, 2 connectors and 1 IC.
Modules for MRS drone distribution boards to add a specific funtionality the distribution boards do not provide.
These modules are equipped with 1x10 header with 2mm pitch providing the module with UART connection, 5V from USB and VBAT from battery.
This PCB serves as a host for MRS Modules for development. It's functionality is simple: provide power for VBAT pins (can be supplied using the 5.5/2.5mm barrel connector), power for the module's MCU and serial communication between the user's computer and the module's MCU (usinng the USB2.0B mini connector).
The VBAT input of the module is designed to be either 4S or 6S LiPo battery, but can be anything the designed module is capable of. Check the module's VBAT capabilities before plugging in any power source in case it is unsuitable and could damage the module.
Three templates are provided in case you aim to implement your own module: Small, Medium and Large.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | MRS_Passives:C0603 | C2, C3 |
| 2 | 1k | MRS_Passives:R0603 | R1, R2 |
| 2 | D_LED_0603_BLUE | MRS_Diodes:LED_0603 | LD1, LD2 |
| 1 | 10uF | MRS_Passives:C0603 | C1 |
| 1 | Barrel_Jack | MRS_Connectors:ADC-028-2-TR | J2 |
| 1 | FT232RQ | MRS_QFN:QFN_32-5x5mm | U1 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo_11.4x12mm_SilkScreen | LOGO2 |
| 1 | MRS_Logo | MRS_Logo:MRS_10mm | LOGO1 |
| 1 | MRS_Module | MRS_Sensors:MRS_MODULE_MEDIUM | MODULE1 |
| 1 | USB2.0B_mini | MRS_Connectors:USB_Mini-B_Lumberg_2486_01_Horizontal | J1 |

ctu-mrs/mrs_hw_modules
Modules for MRS drone distribution boards to add a specific funtionality the distribution boards do not provide.

ctu-mrs/mrs_hw_modules
Modules for MRS drone distribution boards to add a specific funtionality the distribution boards do not provide.

Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...

ThomasVDD/SmartSupply
SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.

ladecadence/GBShooper
Open source hardware GameBoy™ FlashCart Reader/Programmer

mangobanaani/cirradio
Tactical UHF FHSS mesh radio: Zynq-7045 + AD9361, SystemVerilog RTL, C++20 comms stack, AES-256 PKCS#11 crypto

mandraga/SombreroBms
A battery management system (BMS) for small vehicles mainly 36V and 48V (golf carts & quads).

AlanFord/CentralCommand
Central Command pcb for the Contextual Electronics class

CatspersCoffee/S100-Boards
S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.

It measures 60 × 60 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the FT232RQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ctu-mrs/mrs_hw_modules repository on GitHub, at the commit this page was made from: the board is MRS_Module_Host/PCB/MRS_Module_Host.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).