Skip to the content
4 layers25 × 67.6 mmAducm board, the printed circuit board in 3D

Deprecated Kicad Board Files for the ACEStat

Size
25 × 67.6 mm
Copper layers
4
Thickness
1.6 mm
Parts
78
Nets
116
Pads
356
Tracks, vias
1,054, 244
Pours
11
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
27 Apr 2022
Updated
17 May 2022

Overview

Aducm board is an open-source printed circuit board by erdc, from the erdc/ACEStat_Kicad_Deprecated repository on GitHub. It is a 4-layer board of 25 × 67.6 mm with 78 parts on 116 nets, routed with 1,054 tracks and 244 vias.

It is built around the FT232RQ. Its parts include 38 capacitors, 15 resistors, 4 connectors, 3 ICs and 1 switch.

Main components

1

README

README.md

aducm355_board

Repository for board files for the ADuCM355 IC

run git submodule init to get the symbol and footprint libraries

the gerber folder is a placeholder to maintain paths. gerber files are generated via a program and should not be stored in this repo

aducm355 is the main board

JTAG GPIO BREAKOUT is a programming connector and an io breakout connector

Citation "ACEstat: A DIY Guide to Unlocking the Potential of Integrated Circuit Potentiostats for Open-Source Electrochemical Analysis" Eric W. Brown, Matthew W. Glasscott, Keith Conley, Jesse Barr, Jason D. Ray, Lee C. Moores, and Anton Netchaev* https://pubs.acs.org/doi/10.1021/acs.analchem.1c04226

Parts

78
QtyValueFootprintReferences
190.1uFCapacitor_SMD:C_0402_1005MetricC2, C3, C4, C10, C11, C12, C19, C20, C22, C25, C27, C33, C36, C37, C38, C44 +3
110Resistor_SMD:R_0402_1005MetricR1, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22
8Ferrite_BeadInductor_SMD:L_0402_1005MetricFB1, FB2, FB3, FB4, FB5, FB6, FB7, FB8
60.47uFCapacitor_SMD:C_0402_1005MetricC17, C18, C21, C28, C29, C31
410uFCapacitor_SMD:C_0402_1005MetricC13, C39, C40, C43
44.7uFCapacitor_SMD:C_0402_1005MetricC14, C15, C16, C23
4TestPointTestPoint:TestPoint_Keystone_5019_MinatureTP1, TP2, TP3, TP4
21uFCapacitor_SMD:C_0402_1005MetricC41, C42
22.2Resistor_SMD:R_0402_1005MetricR2, R3
27pFCapacitor_SMD:C_0402_1005MetricC1, C7
2EC_Sensor_Input_3_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ3, J4
1SIB_Generic:CorpsCastle
1100kResistor_SMD:R_0402_1005MetricR5
1200Resistor_SMD:R_0402_1005MetricR4
1220pFCapacitor_SMD:C_0402_1005MetricC6
132MHzCrystal:Crystal_SMD_Abracon_ABM10-4Pin_2.5x2.0mmY1
1ADM7154SIB_Generic:LFCSP_8Lead_CP_8_21U3
1Conn_02x25_Odd_EvenSIB_Generic:Molex_SlimStack_2039560503J2
1FT232RQPackage_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mmU2
1SW_PushButton_Switch_SMD:SW_SPST_B3S-1000SW1
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_Amphenol_12401610E4-2AJ1
1aducm_355SIB_Generic:aducm355U1

The 75 most common of 78 parts.

More from erdc/ACEStat_Kicad_Deprecated

1
  • 2 layers25 × 67.6 mmJtag gpio breakout, the printed circuit board in 3D

    Jtag gpio breakout

    erdc/ACEStat_Kicad_Deprecated

    Deprecated Kicad Board Files for the ACEStat

    7 parts

Similar boards

  • 2 layers35 × 38.4 mmHandgelenk, the printed circuit board in 3D

    Handgelenk

    Jeija/esp8266-smartwatch

    ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...

    61 parts233
  • 2 layers169.3 × 128 mmPSU PCB, the printed circuit board in 3D

    PSU PCB

    ThomasVDD/SmartSupply

    SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.

    134 parts96
  • 2 layers62.2 × 55.1 mmGBProg2, the printed circuit board in 3D

    GBProg2

    ladecadence/GBShooper

    Open source hardware GameBoy™ FlashCart Reader/Programmer

    29 parts8CC-BY-SA-4.0
  • 10 layers160 × 100 mmCirradio devboard, the printed circuit board in 3D

    Cirradio devboard

    mangobanaani/cirradio

    Tactical UHF FHSS mesh radio: Zynq-7045 + AD9361, SystemVerilog RTL, C++20 comms stack, AES-256 PKCS#11 crypto

    316 parts8MIT
  • 2 layers180 × 70 mmBms, the printed circuit board in 3D

    Bms

    mandraga/SombreroBms

    A battery management system (BMS) for small vehicles mainly 36V and 48V (golf carts & quads).

    225 parts4
  • 4 layers61.2 × 54.5 mmCentralCommand, the printed circuit board in 3D

    CentralCommand

    AlanFord/CentralCommand

    Central Command pcb for the Contextual Electronics class

    69 parts
  • 2 layers254 × 134.1 mmS100 B1FU, the printed circuit board in 3D

    S100 B1FU

    CatspersCoffee/S100-Boards

    S-100 bus boards designed and built: Z80 and 80386 CPU cards, SRAM/DRAM memory, CPLD/FPGA I/O and SPI boards, an 18-slot backplane and bus terminator.

    164 parts
  • 2 layers60 × 60 mmMRS Module Host, the printed circuit board in 3D

    MRS Module Host

    ctu-mrs/mrs_hw_modules

    Modules for MRS drone distribution boards to add a specific funtionality the distribution boards do not provide.

    13 partsMIT

Questions

How big is the Aducm board PCB?

It measures 25 × 67.6 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Aducm board use?

78 parts, built around the FT232RQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Aducm board KiCad files?

From the erdc/ACEStat_Kicad_Deprecated repository on GitHub, at the commit this page was made from: the board is aducm_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Aducm board design in my own project?

Its repository states no licence, so its author keeps all rights: ask erdc before reusing the design.