6 layers48.2 × 50 mm
4 layers27.4 × 20.4 mm
5GdoubleAmp
tungstenlightbulb/5GHz1KiCad files for prototype amateur radio 5GHz ampifiers
- Size
- 27.4 × 20.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 355
- Nets
- 15
- Pads
- 401
- Tracks, vias
- 121, 8
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 1 May 2018
- Updated
- 9 May 2018
Overview
5GdoubleAmp is an open-source printed circuit board by tungstenlightbulb, from the tungstenlightbulb/5GHz repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 27.4 × 20.4 mm with 355 parts on 15 nets, routed with 121 tracks and 8 vias.
It is built around the SE5004L. Its parts include 9 capacitors, 4 resistors, 3 connectors, 1 IC and 1 inductor.
Main components
1README
README.md5GHz
KiCad files for prototype amateur radio 5GHz ampifiers
Parts
355| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 1pin | SKY:.3via | , , , , , , , , , , , , , , , +9 |
| 3 | 100n | Capacitors_SMD:C_0402_NoSilk | C2, C3, C5 |
| 2 | 0 | Resistors_SMD:R_0603 | R3, R4 |
| 2 | 10p | Capacitors_SMD:C_0402_NoSilk | C1, C8 |
| 2 | 220p | Capacitors_SMD:C_0402_NoSilk | C4, C7 |
| 2 | Conn_Coaxial | Connectors_Amphenol:Amphenol_RF_SMA_132289 | J1, J2 |
| 1 | .3p | Capacitors_SMD:C_0402_NoSilk | C9 |
| 1 | 10u | Capacitors_SMD:C_1206 | C6 |
| 1 | 3.3 | Resistors_SMD:R_0603 | R2 |
| 1 | 4.7n | Resistors_SMD:R_0603 | L1 |
| 1 | 510 | Resistors_SMD:R_0603 | R1 |
| 1 | Conn_01x06 | Connectors_Molex:Molex_PicoBlade_53047-0610_06x1.25mm_Straight | J3 |
| 1 | SE5004L | SKY:QFP_20 | U1 |
The 43 most common of 355 parts.
Similar boards
- 6 layers16 × 16 mm
Phil VTX
deagle205/Whoop_1S_FC
Phil: 1S brushless whoop flight controller, 4-in-1 ESC and VTX (KiCad 10)
48 parts - 4 layers228.6 × 184.1 mm
- 4 layers435.6 × 141.2 mm
NexType X1
shahalthamas/NexType-X1
A full 100% ISO 104 keyboard highly advanced with haptic and screen upgrade functionality
354 parts - 4 layers83 × 82 mm
ReLoki ECAD
denjos007/ReLoki-pub
ReLoki is a Infrastructre-free UWB based relative localization system. It uses a combination of TWR and Geometric AoA for full 3D localizattion and message transfer between participating agents.
354 parts - 4 layers99.8 × 94.6 mm
- 4 layers100 × 123 mm
Duet2
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
356 parts258 - 4 layers150 × 100 mm
Questions
How big is the 5GdoubleAmp PCB?
It measures 27.4 × 20.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the 5GdoubleAmp use?
355 parts, built around the SE5004L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 5GdoubleAmp KiCad files?
From the tungstenlightbulb/5GHz repository on GitHub, at the commit this page was made from: the board is 5GdoubleAmp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 5GdoubleAmp design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).