
Duet2
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

The KiCAD source for the Duet 3d printer controller see www.duet3d.com
Duet2 is an open-source printed circuit board by Duet3D, from the Duet3D/Duet-2-Hardware repository on GitHub. It is a 4-layer board of 100 × 123 mm with 356 parts on 303 nets, routed with 6,897 tracks and 1,084 vias.
It is built around the ATSAM4E8EA-AU, 74HC125D and TMC2660-PA, with the 74HC32D, 74HCT02D and PMV40UN2 among its other parts. Its parts include 118 capacitors, 112 resistors, 15 diodes, 11 ICs and 8 connectors. It belongs with the robots and motor control boards and the SAM D and SAM boards of this library.
The Duet 2 3D Printer Controller design files repository.
For hardware ourhcases see https://www.duet3d.com/
Duet Hardware runs RepRapFirmware: https://github.com/Duet3D/RepRapFirmware
Documentation: https://docs.duet3d.com/Duet3D_hardware/Duet_2_family
Design by Tony Lock and David Crocker More info: https://www.duet3d.com/ LICENSE: see the LICENSE file in the repository
Design by Tony Lock, based on the Duet 0.6 More info here: http://blog.think3dprint3d.com/2015/08/new-duet-electronics-version-085.html LICENSE: http://www.ohwr.org/attachments/2388/cern_ohl_v_1_2.txt
Design by Andy Hingston, Tony Lock, Adrian Bowyer with much advice from Chris Palmer. More info here: http://blog.think3dprint3d.com/2013/12/Duet-Arduino-Due-compatible-3DPrinter-controller.html LICENSE: http://www.ohwr.org/attachments/2388/cern_ohl_v_1_2.txt
Developed in KiCAD: http://www.kicad-pcb.org/display/KICAD/KiCad+EDA+Software+Suite
Please use the forum for support requests.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 0u1 | complib:C_0603 | C5, C11, C16, C26, C27, C36, C37, C46, C48, C49, C50, C51, C52, C54, C104, C124 +11 |
| 21 | 10K | complib:R_0603 | R6, R7, R10, R11, R12, R24, R50, R51, R56, R57, R58, R59, R62, R63, R64, R106 +5 |
| 20 | 1n >50V | complib:C_0603 | C85, C106, C107, C108, C109, C113, C114, C115, C116, C117, C118, C119, C120, C121, C122, C123 +4 |
| 12 | 1K | complib:R_0603 | R14, R42, R43, R66, R69, R70, R71, R72, R82, R96, R99, R102 |
| 12 | 4K7 | complib:R_0603 | R4, R18, R54, R55, R65, R67, R98, R110, R111, R112, R113, R114 |
| 11 | TP | complib:TP_via | TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14, TP15, TP16 |
| 10 | 0R051 | complib:R_1206 | R32, R33, R34, R35, R44, R45, R46, R47, R93, R94 |
| 10 | 0u01 X7R 10% 50V | complib:C_0603 | C14, C15, C28, C29, C38, C39, C56, C57, C105, C110 |
| 10 | 22R | complib:R_0603 | R26, R27, R28, R29, R38, R39, R40, R41, R89, R90 |
| 10 | 2u2 | complib:C_0603 | C18, C19, C53, C58, C59, C60, C63, C65, C68, C84 |
| 8 | 10u 35V | complib:C_1206 | C1, C4, C6, C7, C91, C94, C97, C98 |
| 7 | 100R | complib:R_0603 | R36, R52, R68, R100, R101, R105, R107 |
| 7 | 100u 35V | complib:C_ELEC_6.3x7.7 | C3, C12, C22, C23, C32, C33, C102 |
| 6 | 220R | complib:R_0603 | R22, R25, R48, R77, R78, R79 |
| 6 | 2n2 | complib:C_0603 | C40, C41, C42, C43, C90, C111 |
| 5 | 0u1 50V | complib:C_0603 | C24, C25, C34, C35, C103 |
| 5 | 0u47 | complib:C_0603 | C20, C21, C30, C31, C100 |
| 5 | 180R | complib:R_0603 | R20, R23, R60, R97, R109 |
| 5 | 1u 50V | complib:C_0603 | C75, C76, C77, C78, C101 |
| 5 | TMC2660 | FE Footprints:TMC2660 | U5, U6, U7, U8, U9 |
| 4 | 0u01 | complib:C_0603 | C2, C13, C79, C81 |
| 4 | 10u | FE Footprints:C_0805 | C8, C10, C47, C93 |
| 4 | 2K2 | complib:R_0603 | R1, R17, R61, R104 |
| 4 | DNP 47K | complib:R_0603 | R73, R74, R75, R76 |
| 4 | MOUNTING | complib:Fixing_M4 | M4, M5, M6, M7 |
| 4 | PMV40UN2 | FE Footprints:SOT-23 | TR1, TR5, TR7, TR9 |
| 3 | 470R | complib:R_0603 | R5, R49, R103 |
| 3 | 4K7 0.1% | complib:R_0603 | R19, R21, R53 |
| 3 | BAT54C | complib:SOT-23-D | D22, D23, D24 |
| 3 | DO-219AB | complib:DO-219AB | D8, D18, D21 |
| 3 | FID | complib:Fiducial_1mm_Dia_2.54mm_Outer_CopperTop | M1, M2, M3 |
| 2 | 0R15 0.33W | complib:R_0805 | R85, R86 |
| 2 | 10p | complib:C_0603 | C44, C45 |
| 2 | 10uH 100Mhz | complib:R_0603 | L5, L6 |
| 2 | 27R 1% | complib:R_0603 | R2, R3 |
| 2 | AOD4184A | FE Footprints:D-PAK | TR4, TR8 |
| 2 | DB2W40300L | complib:D_SOD-123F | D1, D2 |
| 2 | GND V_IN | FE Footprints:PIN_ARRAY_2X1 | J24, J31 |
| 2 | SOD-523F | complib:SOD-523F | D5, D25 |
| 2 | SS14M | complib:uSMA | D13, D14 |
| 2 | Z_Stp_Tp | complib:CONN_3x1 | TP1, TP5 |
| 1 | 0R | complib:R_0603 | R108 |
| 1 | 0u1 35V | complib:C_0603 | C125 |
| 1 | 100K | complib:R_0603 | R84 |
| 1 | 10uH | FE Footprints:L_6x6 | L1 |
| 1 | 1R | complib:R_0603 | R13 |
| 1 | 1uH | complib:C_1210 | L2 |
| 1 | 220 ohm, 3 A | complib:R_0805 | L3 |
| 1 | 220u 25V | complib:C_ELEC_6.3x7.7 | C99 |
| 1 | 22nF | complib:C_0603 | C96 |
| 1 | 27K | complib:R_0603 | R37 |
| 1 | 2R2 0.33W | complib:R_0805 | R92 |
| 1 | 2n2 X7R 50V | complib:C_0603 | C95 |
| 1 | 3.3V | complib:D_0603 | D16 |
| 1 | 3K6 | complib:R_0603 | R87 |
| 1 | 47K | complib:R_0603 | R31 |
| 1 | 47K 1% | complib:R_0603 | R80 |
| 1 | 4K7 1% | complib:R_0603 | R81 |
| 1 | 4u7 | FE Footprints:C_0805 | C66 |
| 1 | 5V V_FAN VIN | FE Footprints:CONN_3x1 | J3 |
| 1 | 5V+ | complib:D_0603 | D17 |
| 1 | 5V_PS | FE Footprints:PIN_ARRAY_3X1 | J20 |
| 1 | 680R | complib:R_0603 | R88 |
| 1 | 68R | complib:R_0603 | R30 |
| 1 | 74HC125 | complib:TSSOP-14 | U10 |
| 1 | 74HC32 | complib:TSSOP-14 | U13 |
| 1 | 74HCT02 | complib:TSSOP-14 | U11 |
| 1 | A4403 | FE Footprints:QFN16-4x4 | U3 |
| 1 | AP7361C-33E-13 | complib:SOT-223 | U2 |
| 1 | ATSAM4E8E | complib:LQFP144 | U1 |
| 1 | BED FUSE | MCCQ-122-minibladefuseholder | F4 |
| 1 | BED HEAT | FE Footprints:TERM_2-WAY_6.35mm | J4 |
| 1 | BED TEMP | FE Footprints:PIN_ARRAY_2X1 | J5 |
| 1 | BLM18PG121SN1 | Inductor_SMD:L_0603_1608Metric | L7 |
| 1 | Bed Heat | complib:D_0603 | D6 |
| 1 | CE Logo | complib:Logo_CE_5mm | M9 |
| 1 | CE Logo | complib:Logo_CE_5mm_mirror | M10 |
| 1 | CONN_ALT_HEADER | complib:CONN_ALT_HEADER_v2 | J16 |
| 1 | CONN_SD | complib:IDC_PIN_ARRAY_5x2 | P1 |
| 1 | CRYSTAL_4PIN | complib:Xtal_5x3.2 | X2 |
The 300 most common of 356 parts.

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com

mnemocron/FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32
Marlin 2.0 compatible 3D printer board based on STM32F103 (KiCad)

ed-ni/Armed
Arduino compatbile using the Arduino Core STM32 and working with the Marlin 2.0 3D printer firmware.


46nori/Z80Atmega128
Real Z80A system with I/O emulated by AVR(ATmega128)




It measures 100 × 123 mm and has 4 copper layers, 1.6 mm thick.
356 parts, built around the ATSAM4E8EA-AU, 74HC125D, TMC2660-PA and 74HC32D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Duet3D/Duet-2-Hardware repository on GitHub, at the commit this page was made from: the board is Duet2/Duet2v1.05/Duet2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Duet3D before reusing the design.