Skip to the content
123

PMV40UN2

Nexperia

30V, 4.4A, N-Channel Trench MOSFET

Part id
nexperia/PMV40UN2
Category
Uncategorised
Package
SOT23-3
Pins
3
Used on
14 open-source boards

Overview

The PMV40UN2 is an uncategorised made by Nexperia in a SOT23-3 package with 3 pins. 30V, 4.4A, N-Channel Trench MOSFET.

PCBKit's library has its KiCad symbol (Transistors:N-MOSFET-D 1G 2S 3D, from CERN's library) and its footprint (Package_TO_SOT_SMD:SOT-23-3, from KiCad's library), ready for a KiCad board. 14 open-source boards in 9 repositories on GitHub use it.

Symbol

Transistors:N-MOSFET-D 1G 2S 3DFrom CERN's library

Footprint

123
Package_TO_SOT_SMD:SOT-23-3From KiCad's library

Pinout

3
The pins of the PMV40UN2
PinNameType
1GPassive
2SPassive
3DPassive

Open-source boards using it

14See all 14
  • 4 layers120 × 113 mmVoron Klipper Board, the printed circuit board in 3D

    Voron Klipper Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    360 parts1.1kGPL-3.0
  • 4 layers100 × 123 mmDuet2, the printed circuit board in 3D

    Duet2

    Duet3D/Duet-2-Hardware

    The KiCAD source for the Duet 3d printer controller see www.duet3d.com

    356 parts258
  • 4 layers158 × 95 mmFHNW Pro4E FS19T8-3DPrinterBoard STM32, the printed circuit board in 3D

    FHNW Pro4E FS19T8-3DPrinterBoard STM32

    mnemocron/FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32

    Marlin 2.0 compatible 3D printer board based on STM32F103 (KiCad)

    264 parts17GPL-3.0
  • 2 layers100 × 95 mmController, the printed circuit board in 3D

    Controller

    Doc-Raptor/dragon_controller

    32bit 3d-printer controller board for 3d printers from china with the anet-stlye controller-board

    88 parts3
  • 4 layers100 × 105 mmAzor 1.0, the printed circuit board in 3D

    Azor 1.0

    didix21/AZOR

    This repository contains all the AZOR 1.0 board KiCad files.

    183 partsGPL-3.0
  • 2 layers100 × 71 mmArmed, the printed circuit board in 3D

    Armed

    ed-ni/Armed

    Arduino compatbile using the Arduino Core STM32 and working with the Marlin 2.0 3D printer firmware.

    210 parts
  • 2 layers81.7 × 58 mmValve tester, the printed circuit board in 3D

    Valve tester

    OlfactoryBehaviorLab/valve_tester

    Small board for actuating solenoids

    54 partsGPL-3.0
  • 4 layers100 × 123 mmDuet2Maestro, the printed circuit board in 3D

    Duet2Maestro

    Duet3D/Duet-2-Hardware

    The KiCAD source for the Duet 3d printer controller see www.duet3d.com

    341 parts258

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the PMV40UN2?

Yes. The symbol is Transistors:N-MOSFET-D 1G 2S 3D and the footprint Package_TO_SOT_SMD:SOT-23-3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the PMV40UN2?

SOT23-3, with 3 pins. Its footprint is drawn on this page.

What can replace the PMV40UN2?

Parts like it in the library: the JTD78L05CA by JTD, the ESD752DBZ by Texas Instruments, the MG78L05AT3 by Megain and the MCP111-300E/TT by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the PMV40UN2?

14 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.