Skip to the content
1234567891011121314

74HC125D

NexperiaExtended

-40℃~+125℃ 1 11ns@4.5V,50pF 160uA 2V~6V 4 7.8mA 7.8mA 74HC Tri-State Unidirectional SOIC-14 Buffers, Drivers, Receivers, Transceivers ROHS

Part id
nexperia/74HC125D
Category
Buffers, Drivers, Receivers, Transceivers
Package
SO-14
Pins
14
In stock
128,321 at JLCPCB (C5598)
Used on
47 open-source boards

Overview

The 74HC125D is a buffers, Drivers, Receivers, Transceiver made by Nexperia in a SO-14 package with 14 pins. -40℃~+125℃ 1 11ns@4.5V,50pF 160uA 2V~6V 4 7.8mA 7.8mA 74HC Tri-State Unidirectional SOIC-14 Buffers, Drivers, Receivers, Transceivers ROHS.

PCBKit's library has its KiCad symbol (74xx:74LS125, from KiCad's library) and its footprint (Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, from KiCad's library), ready for a KiCad board. 128,321 are in stock at JLCPCB (part C5598). 47 open-source boards in 35 repositories on GitHub use it.

Symbol

123
74xx:74LS125From KiCad's library

Footprint

1234567891011121314
Package_SO:SOIC-14_3.9x8.7mm_P1.27mmFrom KiCad's library

Pinout

14
The pins of the 74HC125D
PinNameType
1—Input
2—Input
3—Tri-state
4—Input
5—Input
6—Tri-state
7GNDPower in
8—Tri-state
9—Input
10—Input
11—Tri-state
12—Input
13—Input
14VCCPower in

Open-source boards using it

47See all 47
  • 4 layers100 × 123 mmDuet2, the printed circuit board in 3D

    Duet2

    Duet3D/Duet-2-Hardware

    The KiCAD source for the Duet 3d printer controller see www.duet3d.com

    356 parts258
  • 2 layers138 × 96.9 mmISA Card, the printed circuit board in 3D

    ISA Card

    AkBKukU/CM153-Repro

    A reproduction of the Philips CM-153 LMSI controller

    161 parts145
  • 2 layers308.7 × 241.8 mmOTTOtact, the printed circuit board in 3D

    OTTOtact

    cester-ino/OTTO-hardware

    those specs refer to the tactile buttons version, but a led backlight button version is in the works too.

    229 parts49GPL-3.0
  • 2 layers56 × 56 mmPps watch, the printed circuit board in 3D

    Pps watch

    idlehandsdev/pps-watch

    An extremely accurate watch that doesn't tell time.

    39 parts42AGPL-3.0
  • 4 layers170 × 130 mmZ80Atmega128, the printed circuit board in 3D

    Z80Atmega128

    46nori/Z80Atmega128

    Real Z80A system with I/O emulated by AVR(ATmega128)

    109 parts9GPL-3.0
  • 2 layers21.4 × 25.2 mmCicada pwm esc, the printed circuit board in 3D

    Cicada pwm esc

    mars2860/cicada

    The quadcopter based on ESP8266 wifi module

    32 parts6GPL-3.0
  • 2 layers98 × 91.1 mmSoil Sensor Hub, the printed circuit board in 3D

    Soil Sensor Hub

    ArtoLabs/Sensi-pot

    Collection of modules for indoor/outdoor gardening automation and environmental control

    78 parts3MIT
  • 2 layers86.4 × 54.6 mmBeagleflash, the printed circuit board in 3D

    Beagleflash

    mrnuke/beaglebone-spi-flasher-cape

    The SPI flasher cape is a cape for the BeagleBone family of boards which allows the BeagleBone to interface with a SPI NOR flash chip in order to allow programming or reading the chip's contents.

    23 parts3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 74HC125D?

Yes. The symbol is 74xx:74LS125 and the footprint Package_SO:SOIC-14_3.9x8.7mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 74HC125D?

SO-14, with 14 pins. Its footprint is drawn on this page.

Where is the 74HC125D datasheet?

Nexperia publishes it: the Datasheet link on this page opens it.

Where can I order the 74HC125D?

JLCPCB lists it as part C5598, with 128,321 in stock; the sellers' links on this page open their listings.

What can replace the 74HC125D?

Parts like it in the library: the CD74HC243M96 by Texas Instruments, the MC74VHCT50AD by onsemi, the TC74HCT7007AF-ELF by Toshiba and the CD4041UBM96 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 74HC125D?

47 boards in 35 repositories on GitHub; the most starred are listed on this page, with their KiCad files.